ideas ?
Cheers,Padhu
-
username gltest privilege 5 password 0 gltest
privilege configure level 5 interface
privilege interface level 5 shutdown
privilege exec level 5 show ip route
privilege exec level 5
: RE: DLSW Filters / Border Peers
Hello Padhu,
I do not run border peer in a group. What I have is two 7204 VXR
chassis that we have dedicated to DLSW. These routers are located in the
core and all remote locations peer to one of these routers for DLSW
connectivity. Each remote router peers
Have u tried assigning an ip address to an ethernet interface of a cisco
router acting as a dhcp client with helpder-address pointing to another
cisco IOS dhcp server ?
Ofcourse we wouldn't want the routers ip changing all the time ..maybe witha
reservation would work here .
Cheers,Padhu
and combine
them into one superscope to do this. Hope this helps.
Cheers,Padhu
-Original Message-
From: whatshakin
To: [EMAIL PROTECTED]
Sent: 7/16/00 12:11 PM
Subject: DHCP and subnets
Hello folks,
Please clarify this for me.
Hypothetical example: Campus LAN with multiple buildings
-A)(DLSW BORDER GROUP-20)---(DLSW BORDER
GROUP-10)--(NET-B)
Cheers,Padhu
-Original Message-
From: Jaeger, Dennis (CC-Network Dev) [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 13, 2000 5:23 PM
To: 'Scott Jensen'; Don Dettmore
Cc: [EMAIL PROTECTED]
Subject: RE: IBM Gurus - Please
Did you try changing the cisco cable ?
Did you try changing the CSU?DSU ?
Did you try the transmit inverse clock either on the csu or on the cisco ? (
Only one at a time should be changed for testing)
-Original Message-
From: ANIL.YADAV
To: Omer Shommo
Cc: Cisco Group Study
Sent:
you need to switch it to anothet interface to transfer the dlci...
u need an input and output port for a frame switch
-Original Message-
From: Billy Monroe [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 29, 2000 2:59 PM
To: [EMAIL PROTECTED]
Subject: Frame-Relay using two routers
You could also use 2 25xx back to back and switch frame relay across the
tunnel..a friend of mine just got this working for me .
-Original Message-
From: ElephantChild [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 27, 2000 6:35 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re:
think you do much. ( If these 4
subnets were in the same area you accomplish that)
Cheers,Padhu
-Original Message-
From: sumthin sumthin [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 27, 2000 10:58 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: VLSM Question
CDP is based on snap encapsulation ..so may be a layer 2 filetr based on
cdp protocol no also may work
-Original Message-
From: Feliz, Edgar
To: Aaron Prather; [EMAIL PROTECTED]
Sent: 6/27/00 5:14 PM
Subject: RE: Can you block CDP with an access list???
You can disable it on an
10 matches
Mail list logo
