Explanation This message indicates an underflow in the port ASIC transmit
buffer. The first [dec] is the module number. The second [dec] is the ASIC
port number.
Action If the error is limited to a single module, replace the module. If
the error occurs several times, contact your technical suppo
Looks like it could be a duplexing issue , check your duplex settings on
each side and make sure they are the same.
-Original Message-
From: Poulin, Darnell [mailto:[EMAIL PROTECTED]
Sent: 16 June 2003 05:49 PM
To: [EMAIL PROTECTED]
Subject: Errors on Ethernet Interfaces [7:70733]
Hey fo
He can still take the CCNP , however if the CCNA expired when he writes
the final CCNP exam , he will then NOT be a CCNP , he will have to re do
his CCNA exam, pass it , and then he will be recognized as a CCNP.
-Original Message-
From: Mike Momb [mailto:[EMAIL PROTECTED]
Sent: 09 June 200
do you not have a DHCP server on your LAN ??? If so why don't you
quickly set up a few scopes pointing to your subnets you have on the
6506's to issue addresses via dhcp. Of course you would also need a msfc
card installed on the 6509 to do the routing , or have a router doing
the routing ( router
Put the port in trunk mode then multiple vlans can go in and out of
the port.
-Original Message-
From: koh jef [mailto:[EMAIL PROTECTED]
Sent: 02 June 2003 02:13 PM
To: [EMAIL PROTECTED]
Subject: Re: Multiple VLANs in a single switch port [7:69991]
hi ppl,
is there any way/s to con
Cisco Certified Network Associate Exam (CCNA 640-607)*
Exam Number: 640-607
Associated Certifications: CCNA
Duration: 90 minutes (55-65 questions)
Available Languages: English, Japanese in Japan only
Click Here to Register: Pearson VUE or Prometric
*Approved for VA reimbursem
Hi all,
Just to let you know , I took the support exam on Friday 640-606 and passed ,
which now makes me CCNP certified. It's been a long road , however nice to
get
there.Now onto getting my design behind me , then I will crack the CCIE.
Thanks everyone for all the valuable input people put into
Or this command
show mac-address-table address .. (zeros being the mac
address you are looking for.)
Cheers
-Original Message-
From: Angel Leiva [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 18, 2003 8:31 PM
To: [EMAIL PROTECTED]
Subject: RE: Finding device on network via ci
like you did.
Thanks
-Original Message-
From: Ron Beasley [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 06, 2003 2:16 PM
To: Peri Sophos; [EMAIL PROTECTED]
Subject: RE: 10 half or 100 full [7:64482]
YOU NEED TO TELL SISCO TO GET YOUR ASS OFF MY EMAIL LIST NOW1
Peri Sophos
Sorry forgot to mention , cat3 cable wont go well with 100mb full duplex
and is not a very good cable :)
-Original Message-
From: M.C. van den Bovenkamp [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 05, 2003 5:39 PM
To: [EMAIL PROTECTED]
Subject: Re: 10 half or 100 full [7:64482]
Mike
hI Mike,
my opinion is that a server should be forced to 100mb full duplex and on
the switch side 100mb full duplex ONLY for servers though. On the wkst
side and switch side things should be left on auto auto. I do this in my
company , we have around 3000 users in the building , I don't have a
pro
There you go!
-Original Message-
From: Joupin [mailto:[EMAIL PROTECTED]
Sent: Monday, March 03, 2003 11:59 PM
To: [EMAIL PROTECTED]
Subject: CCO Owners request [7:64290]
Hi
Ill be appreciated if someone who has a CCO get this page for me
regarding
Modemcap and Modem inistazization st
Hi ,
Where about in Ciscoworks 2000 would you find this NGenius monitor you
are talking about ??
Thanks
-Original Message-
From: JSalminen [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 01, 2003 12:48 AM
To: [EMAIL PROTECTED]
Subject: Re: Switch Port Traffic [7:64105]
Well within the
Hi ,
If you have enough memory on the switch being around 64MB , then I
suggest that you upgrade to a newer version of code , as the code you
are using is very old and out dated now. You can go onto Cisco's web
site and type in CAVEATS and your code , if there is such a current
problem then Cisco
HI ALL
I am onto my last exam for CCNP , however I have no study material for this
exam , I am asking for help here , can anyone help with which book/s will be
excellent material for this exam , enough for a good pass. The other exams ,
I used the Cisco course books which of course was excellent a
Thanks everyone :)
-Original Message-
From: Sam Sneed [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 22, 2003 5:10 PM
To: [EMAIL PROTECTED]
Subject: Re: Sniffer software: [7:61566]
I like this one better than ethereal and it is free
http://analyzer.polito.it/
""P
Hi all ,
I wonder if anyone can help me :) , I am looking for software where I can
load it on my laptop , and have it available , in case I have to use a
sniffer at a particular site.
I have a proper sniffer at my head office , however I do travel , and don't
want to bring that huge thing every
I'd say buy new books , cause there might be one or two questions NOT in
the old books which you have not studied , and then you play the
guessing game , which is no good :)
-Original Message-
From: Nsikan Ntia [mailto:[EMAIL PROTECTED]]
Sent: Saturday, January 18, 2003 8:32 PM
To: [EMAIL
There will be HSRP , Not ATM LANE :)
-Original Message-
From: David Ristau [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 14, 2003 12:03 AM
To: [EMAIL PROTECTED]
Subject: CCNP 640-604 switching exam [7:60987]
Taking the 640-604 switching exam within the next week or two and my
researc
OR , if on a gigabit port , you could use the term "show run int gigabit
0/1" this would show you the config for gigabit 0/1 only , so you don't
need to go through the entire config of a show run command :)
A show interface will show you the entire config like a show run , just
kind of in a differ
OR , you don't have to change the IP , you can simply change the Vlan on
the port to work for the IP on the WKST. As long as you have DHCP up and
running and you have got vlans configured on your switch , you can move
a pc any where , put the port into the correct Vlan , and you will work.
I have
Don't worry Ken we all have our moments :)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 09, 2003 11:24 AM
To: [EMAIL PROTECTED]
Subject: RE: Show IPX Servers (SAP Types) [7:60688]
Sorry, having a blonde moment. Of course they are hex ;-)
Yes you can have more than one ABR for one particular area :) If you
want too.
-Original Message-
From: Helena [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 09, 2003 1:21 AM
To: [EMAIL PROTECTED]
Subject: Multiple ABR for a particular Area? [7:60654]
Hi,
Are you allowed to have mor
VERY HARD to believe that , maybe his father runs the testing centre :)
-Original Message-
From: Ladrach, Daniel E. [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 07, 2003 8:57 PM
To: [EMAIL PROTECTED]
Subject: Re: CCIE Vs. BS or MS degree [7:59481]
I just want to make one more commen
And if you really want to know , might sound silly BUT it does answer
your question , one is a switch with Router capability and one is simply
a router. :)
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 07, 2003 6:20 PM
To: [EMAIL PROTECTED]
Subject: Re:
Guy's do we really need to discuss this more ?? Can't we just take
note that we all have different opinions and let's get back to all the
nice technical issues not the BORING subjects like these:)
PLEASE
-Original Message-
From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
Sent:
Hi Mark
I took the exam two weeks ago and passed , the exam focuses on basically
everything , OSPF , BGP , Redistribution , I had redistributing into
OSPF , make sure you add the subnet command at the end !
IS-IS , Here they got me , asked me six questions , which I thought was
not very nice o
700
-Original Message-
From: Jiin Kim [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 18, 2002 10:25 AM
To: [EMAIL PROTECTED]
Subject: What is the passing grade for BSCI exam? [7:59445]
Hi everyone.
I'm taking 640-901 pretty soon, but I can't seem to find what the
passing
grade is.
Well guy's add another to the list
Wrote my 640-901 this morning , PASS!!!
Cool, two down two to go !
This sight rocks!!
-Original Message-
From: John McCartney
To: [EMAIL PROTECTED]
Sent: 12/13/02 5:27 AM
Subject: RE: Passed 640-901 today [7:59108]
Congrats! If you though
Hi all , I am writing my routing exam this Friday , I have studied hard ,
any body have some good ideas where to really concentrate ?
Thanks for the help
Cheers !!! Theperiman
NOTICE - This message contains privileged and confidential information
intended only for the use of the addressee nam
30 matches
Mail list logo
