Natasha,
I love that name...anyway here is the definition:
Throttle - Number of times the receiver on the port was disabled, possibly
due to buffer or processor overload.
Take care,
Raul
- Original Message -
From: "Natasha" <[EMAIL PROTECTED]>
To: "CCIE Group study list" <[EMAIL PROTEC
No worries you are fine.
- Original Message -
From: "Thomas" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 13, 2001 6:40 AM
Subject: upgrade bootstrap
> Hi Group - I just upgraded the bootstrap for my 2501. Whenever I bootup
or
> reload th
Well it seems to me that you can use different process ids to simulate areas
and reditrubute as needed so that would give EIGRP
an OSPF area flavor. We do this at work quiet a bit for our European
customer.
Raul
- Original Message -
From: "Scott Jensen" <[EMAIL PROTECTED]>
To: "Brant Ste
Yes, I see the end is near.I wonder if this would work:
Mac-Mac---Mac--Mac
Look folks, so what if CISCO is going down and Juniper is better in some
respectslearn something from Microsoft.
Its hard to kill somthing that is so entrenched
I respectfully disagree with your disagreeing...heheheheh. I just cant see 3
CCIEs unable to network? What do you mean by network? They cant setup a
router? They are having problems with the IOS? or with other non-cisco
equipment?
- Original Message -
From: "Robert Padjen" <[EMAIL PROT
See if you can find an Andrew MAU unit. These take RJ 45 and are very good.
I picked up 2 on e-bay myself.
Very good piece of equipment. And cheap.
Raul
- Original Message -
From: "Niraj Palikhey" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
I thought there was no advertising on this board?
Raul
- Original Message -
From: "NP-BASS LEON" <[EMAIL PROTECTED]>
To: "'Bradley J. Wilson'" <[EMAIL PROTECTED]>; "cisco"
<[EMAIL PROTECTED]>
Sent: Wednesday, April 04, 2001 8:53 AM
Subject: RE: Job Opening Senior Network Engineer
> DIDN
No they cannot.
Raul
- Original Message -
From: "Vincent"
To:
Sent: Wednesday, April 11, 2001 10:02 AM
Subject: Flash Question [7:214]
> Hi;
>
> Does the 2500 flash can be used in 2600 series?
>
> Thanks
> Vincent
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/
Wesson,
I have run into this before. I take it that you have the fastethernet
interfaces on auto negotiate. Take them off auto negotiate ie duplex full,
speed 100.
This worked for me before especially running these T code IOSs on the 2600.
Raul
- Original Message -
From: "SH Wesson"
To
It should as long as you have the broadcast parameter on on the dialer map
you will define for the aux port.
Raul
- Original Message -
From: "Rizzo Damian"
To:
Sent: Monday, April 23, 2001 10:50 AM
Subject: Question regarding OSPF [7:1599]
> If I have 2 routers connected back-to-back
Have you checked your logs to see if the DLCIs where dropping? Service
interruptions? This would cuase your dlsw peers to go down.
- Original Message -
From: "Fawad Alam"
To:
Sent: Monday, April 30, 2001 3:14 PM
Subject: DLSW+ Problem [7:2599]
> Hi
> I am having some performance proble
Anyone have some NT1s for sale cheap. I see that all my BRIs are S/t
interfaces.
Thank you,
Raul
- Original Message -
From: "Daniel Cotts"
To:
Sent: Tuesday, May 01, 2001 11:04 AM
Subject: RE: Question about Teltone ISDN demonstrator [7:2687]
> The Demonstrator has U interfaces only.
Will a CCNA do?
Raul
- Original Message -
From: "Claudette Graham"
To:
Sent: Wednesday, May 02, 2001 2:02 PM
Subject: NEED CCIE in the WEST VIRGINIA AREA [7:2919]
> The following is a job description I recently received from my client
which
> needs to be filled immediately.
>
> We are
Alex,
Yes you are correct all you need to do is set up the DCE end with the clock
rate command and a valid ip and you should be ready to go.
Raul
- Original Message -
From:
To:
Sent: Monday, May 07, 2001 10:37 AM
Subject: Re: 2511 between cable modem and network
>
>
> Mr. Fernandez,
I was able to pick 2 NT1s on e-bay for less than 50 bucks a piece and I got
the demonstrator for 1685.00. Its significantly less than the 2685 price I
was quoted for the ILS-2000. The demostrator works fine and the
documentation is easy to read and get it up and running.
Raul
- Original Mess
Yes you can type "relaod at "
Raul
- Original Message -
From: "Larry Ogun-Banjo"
To:
Sent: Wednesday, May 09, 2001 2:57 PM
Subject: Scheduled reload [7:3869]
> Does anyone know if there is a command to boot/reload a router on a future
> date
> ie some type of scheduler?
> FAQ, list ar
Try www.PacificCable.com
Raul
-
Original Message -
From: "Joe Cremer"
To:
Sent: Wednesday, May 30, 2001 3:39 PM
Subject: Back to back Serial for Cisco 2621 [7:6497]
> Does any one know a cable supplier for a dce/dte cable to connect two
cisco
> 2621 routers with dual serial modules
I recommend the Teltone demonstrator for the a lab setup. Thats the one I
use. I got it for 1685.00
Raul
- Original Message -
From: "Tariq Azad"
To:
Sent: Tuesday, June 12, 2001 8:17 AM
Subject: ISDN Simulator [7:8132]
> Hello Group !
>
> Which ISDN simulator is an affordable and chea
Go to www.cciebootcamp.com . They have pretty good write up. I know of 2
guys that just took itand I dont know but they both said they were
going to smoke ityet they both never got invited back on the second day.
Perhaps they undersetimated the amount of material and the little hidden
I think you will be fine. The CCIE written does cover a great deal of
material. But nothing you have not had yet throughout your studies. I would
definitely hit anything with security related issues. When I took mine I did
not find it at all difficult however I do believe that the questions can be
Lee,
Just from your show ver looks like the IOS is not seeing the serial
interfaces. I suggest you upgrade your code.
Raul
- Original Message -
From: "Hunt Lee"
To:
Sent: Thursday, June 21, 2001 9:56 AM
Subject: Help!!! [7:9311]
> [ The following text is in the "x-user-defined" char
[ The following text is in the "iso-8859-1" character set. ]
[ Your display is set for the "US-ASCII" character set. ]
[ Some characters may be displayed incorrectly. ]
Folks,
This is but one of the e-mails I have seen on the subject, I think it looks
very promising myself:
Hello,
My n
[ The following text is in the "iso-8859-1" character set. ]
[ Your display is set for the "US-ASCII" character set. ]
[ Some characters may be displayed incorrectly. ]
Folks,
This is but one of the e-mails I have seen on the subject, I think it looks
very promising myself:
Hello,
My n
The labs in my humble opinion are good. I use them. They make you think and
are excellent material to help in the pursuit of the CCIE. Like everyhting
else, these labs are just tools and these tools will only get you so far. A
combination of reading, a lot of configuration(hands on) and
troublesho
Add the broadcast statement to your dialer map.
Raul
- Original Message -
From: "Davide Ferrari"
To:
Sent: Tuesday, July 17, 2001 9:21 AM
Subject: Eigrp doesn't form neighborship trhough an ISDN link [7:12633]
> Hi all..
> Strange problem two router having a ISDN (bri) and a
First of all, unless they make the lab very easy this will not ever happen.
Unlike other certifications for this one you have to study and have hands
on. Most people say they want one but its hard to do due to real life time
constraints. I have my own home lab and it helps but so much material at
You will need a username and paswword to access it.
Raul
- Original Message -
From: "Donald B Johnson jr"
To:
Sent: Thursday, July 19, 2001 10:44 AM
Subject: ios features [7:12945]
> Does anyone remember the link that allows you to search for a IOS version
> based on a feature, say DH
I dont think anyone should say anything about the new lab until they have
experienced it. And if you are unfortunate enough to be able to compare both
the go ahead. I dont think CISCO is going to in anyway harm the program.
Raul
- Original Message -
From: "Greg Macaulay"
To:
Sent: Thurs
Telco problem.over utilization should not make a PVC drop just casue
drop packets spevailly if you are exceeding the prot speed.
Raul
- Original Message -
From: "Jeff"
To:
Sent: Monday, July 23, 2001 9:20 AM
Subject: FrameRelay Over Utilized [7:13349]
> Hello,
> If I have a frame
I am not having any problem pinging my subinterface addresses locally. You
may want to shut down the interface and bring it back up and see if this
alleviates your problem.
Raul
- Original Message -
From: "Grad Alfons Kanon"
To:
Sent: Thursday, July 26, 2001 9:24 AM
Subject: QUERY ON
Thank John, I will do that.
Raul
- Original Message -
From: "John Neiberger"
To:
Sent: Thursday, August 16, 2001 10:17 AM
Subject: Re: Simulating SNA traffic in a network [7:16247]
> A few months ago I posted some configs that configure your routers for
> APPN. This will allow you to
If dont want to use the DLCs and you are using a physical interface for
frame-relay just disable frame-relay inverse arp. If you dont want to do
that use point - to - point subinterfaces and define the DLCI you want to
use on the subinterface.
Raul
- Original Message -
From: "Donald B Jo
The good ole PPP host route generated by PPP. If you use HDLC encap it will
not happpen but they you have to for go all the nice things PPP encap gies
ya. You can also disable the host route genration on the BRI interface.
Raul
- Original Message -
From: "Bob Perez"
To:
Sent: Monday, De
Just access-list it.
- Original Message -
From: "Kwame"
To:
Sent: Wednesday, January 09, 2002 8:03 AM
Subject: SNMP Community String [7:31373]
> Is there a way to encrypt the snmp community strings? The strings are
> security holes since there are tools out there (I know of at least o
Does it havve a configuration on it? If not then the serial interfaces can
SLARP a config on to the router. EALouie is an expert on this and he is part
of the mailing list.
Raul
- Original Message -
From: "xie rootstock"
To:
Sent: Wednesday, September 05, 2001 2:09 PM
Subject: console p
AMEN
- Original Message -
From: "Donald B Johnson jr"
To:
Sent: Thursday, September 06, 2001 3:36 PM
Subject: Re: One Journalist's Opinion of CCIE [7:18843]
> Yeah we all know what I'd do if he were on this list with that drivel. At
> least he analog
Tom,
Congrats. You have will have about a 6 month wait in the 2 day format. This
actually will be better when the 1 day format crancks up at the beginning of
October. Again congrats.
- Original Message -
From: "Tom Keough"
To:
Sent: Monday, September 10, 2001 3:59 PM
Subject: Passed the
I agree with that. I have on 2 occassions done business with KG2 and the
prices were by far the best. BTW, excellent customer sevice.
Sincerely,
Raul F. Fernandez
- Original Message -
From: "Kelly D Griffin"
To:
Sent: Friday, October 05, 2001 11:30 AM
Subject: www.anthonypanda.com [7:2
Halabi is to BGP what Doyle I is to IGPs a must have.
- Original Message -
From: "juno vtv"
To:
Sent: Friday, October 26, 2001 3:17 PM
Subject: Re: Jeff Doyle Vol I or II? [7:24269]
> Thank you guys for the info! I would like to get a book for IGPs and then
> one for BGP. So would you
The first one is a must.
- Original Message -
From: "juno vtv"
To:
Sent: Friday, October 26, 2001 2:25 PM
Subject: Jeff Doyle Vol I or II? [7:24269]
> Hi everybody,
>
> Does anybody know what the difference are between Jeff Doyle's Routing
> TCP/IP Vol 1 and 2, besides BGP stuff?I have
I also have 2523 and have found it awsome as frame switch. *00 is an
excellent priceI got mine for a little over 900 with 16/16
Raul
- Original Message -
From: "Ouellette, Tim"
To:
Sent: Tuesday, October 30, 2001 9:03 AM
Subject: RE: Off Topic - Router price [7:24537]
> Charles,
>
41 matches
Mail list logo
