You know what if you get you kicks scolding people before helping them, then
I rather you not help at all. Keep the Sarcasm to your self!
From: Sean Knox
To: 'Ray Smith' , [EMAIL PROTECTED]
Subject: RE: TACACS+ Server [7:38324]
Date: Fri, 15 Mar 2002 14:40:11 -0800
Padding here, padding
Solaris buddy. Do you know how to build one?
From: Brian
To: Ray Smith
CC: [EMAIL PROTECTED]
Subject: Re: TACACS+ Server [7:38324]
Date: Thu, 14 Mar 2002 16:52:17 -0800 (PST)
I suspect that depends slightly on the od u want to use?
BSD, Linux, and Solaris will all run on that, which r u
Does anyone know how to build/setup a TACACS+ Server on a Sparc-5?
Ray
_
Chat with friends online, try MSN Messenger: http://messenger.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=38324t=38324
Yes you can, but you should first type the following in global config mode:
boot system slot0:
As far as I can remember, that is the way it is done, but if anyone disagree
jump in anytime.
Ray
From: Mohammed Nabelsi
Reply-To: Mohammed Nabelsi
To: [EMAIL PROTECTED]
Subject: Re: tftp server
Guys,
Correct me if I am wrong, but are there several ways of doing a reverse
telnet? When the term reverse telnet surfaces I think of a console
connection via a terminal server to another router or switch using an ip
address and port number (eg. 10.10.5.1 2001).
However, based on what I am
Guys,
I have been trying to get two 19 horizontal power strips to mount on my
rack, but have only been to locate places that sell the ones with surge
protectors, and those are just rediculously priced. Does anyone have the
link to anywhere that has reasonably priced rack mountable power
Guys,
Is there a difference with configuring the Catalyst 4000 as oppose to a
Catalyst 5000? Is the operating system the same or even similar?
Ray
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Don't sweat it man, things are going to be said out of anger because a lot
of people are still on edge as a result of what happened to us here in New
York. Now is not the time to turn on each other. I undertand where you are
coming from man ..Peace!
From: John Neiberger
Reply-To: John
Could some please break down to me in layman terms how the Network statement
(eg., Network x.x.x.x) in BGP differs from that used in RIP, IGRP or EIGRP?
I am not exactly clear on the differences on how they are used.
Ray
_
Get
Guys,
After my boss delegated me to research all I can about what is need to
upgrade if necessary our Cisco routers and switches to work with Windows-XP,
I was only able to assert from information on the web that there is a bug in
the switch software that is incompatible with XP.
Does anyone
Hey guys,
I am setting up a lab with:-
HeadQ= DLCI 101
router A = DLCI 102
router B = DLCI 103
router C = DLCI 104
The switch interfaces are s0, s1, s2, and s3. My configuration for the
switch is as follows:-
Frame-Switch#
frame-relay switching
int S0
no ip address
encapsulation
Guys,
Correct me if I am wrong but in a Frame-Relay lab scenaio that I am doing.
I have 3 routers representing spokes, 1 4000 series configured as a switch,
and 1 representing the Hub/HQ router. I am planning on using sub-interfaces
on the HUB and physical interfaces for the spoke routers.
Can anyone point me in the direction of where I can obtain a decent source
for figuring out what the hexidecimal values in the config-registers
translate to, for example, what does 0x102 do as oppose to 0x12 etc. I
really need to know this guys. Thanks
Ray
Thanks a million for responding good buddy. I will try this method ...I
appreciate it.
From: Stephen Skinner
Reply-To: Stephen Skinner
To: [EMAIL PROTECTED]
Subject: RE: Figuring out Config Register Values [7:15894]
Date: Tue, 14 Aug 2001 12:24:03 -0400
on the subject ...
another good
Did anyone get a look at the new edition of Caslow's book Router, Bridges
and Switches for CCIE's? If so, is the new information worth buying the new
edition in addition to the 1st edition that I already own? Thanks
_
Get your
I have been searching high and low on Cisco's website for information on how
to figure out the hexidecimal values of various Config-Register. Example,
0x2141, 0x102, 0x2142, 0x2102 etc. I would like to know how to figure out
the bit value and be able to tell what each value is trying to
Anyone with a used 19 Network Rack in good condition to unload at a
reasonable price, preferable in the New York/NJ area for the purpose of
saving on shipping handling? Thanks
_
Get your FREE download of MSN Explorer at
Guys,
I am faced with a question that seems to be a bit vague so I am wondering if
anyone out there could jump in for a moment.
Q: Define and explain the 5 conversion steps of data encapsulation?
I am thinking of the way the packet is encapsulated when passing through the
OSI layers. If
Does anyone have a Five-in-One Synchronous Serial WAN Module for sale or
swap? I tried searching on E-bay but could not find any. Any suggestions?
Thanks
_
Get your FREE download of MSN Explorer at
Just go to this site and select the instructions for the device you want to
break into: http://www.cisco.com/warp/customer/474/
Ray
From: KroyweN
Reply-To: KroyweN
To: [EMAIL PROTECTED]
Subject: need password recovery instruction [7:14899]
Date: Sat, 4 Aug 2001 11:06:13 -0400
I am having
Guys,
Does anybody out there want to make a cable swap? I have a T1 Octopus cable
for a 7000 router that I would be more than willing to trade for one of
those octopus Async cable for a 2511 Terminal Server.
Any takers
Does anyone know what the following statement means? Notice it when I did a
reload on a Cisco 7500.
AUTOBOOTVAR (BOOT) env variable isn't set. Please set it to point to a
non null string. Attempting to load the first image in disk0 or slot0.
Any takers?
Guys,
I was putting a lab together and noticed something wierd. I configured my
Sparc (Unix) station's Le0 interface with an IP address, brought it up and
decided to play around with it a little. I noticed that I could ping the IP
that I configured on the interface although it was
: A PING - Connectivity Issue [7:13873]
Date: Thu, 26 Jul 2001 18:27:58 -0400
because your pinging your own interface
Ray Smith wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Guys,
I was putting a lab together and noticed something wierd. I configured
my
Spa
Guys,
I just received a Cisco 2516 router/hub and I am a bit unsure about geting
the hub portion to respond for me. The configuration currently in the as
related to the hub portion is as follows:
hub ether 0 1
link-test
auto-polarity
!
hub ether 0 2
link-test
auto-polarity
My questions are
But if I write any file name won't it also give me an error after searching
for that name and not finding it? Have you ever had this same problem
before? Please say. Thanks for you input and await your response.
From: Farhan Ahmed
To: 'Ray Smith' , [EMAIL PROTECTED]
Subject: RE: HELP
I have a cisco 2503 router that is in the mode of Router(boot). I have
tried doing a copy tftp flash with another 2500 file stored on my tftp
server, but it would not work, because when I got to the option that asked
for destination file name there was none present in the router. Any
Guys,
I was doing the Frame-Relay Lab on page 184 of the ALL-In-One CCIE Lab Study
Guide containing two DTE devices and a Switch. My two questions are as
follows:-
1) Why can I only ping from the far end of each route, but can not ping the
interface of the router that I am pinging from?
Okay here we go again with this thread .where does it end. Enough
already!!
From: Liang Mark J Civ AFRL/PROI [EMAIL PROTECTED]
Reply-To: Liang Mark J Civ AFRL/PROI [EMAIL PROTECTED]
To: "'B J'" [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: RE: Cisco Certs Becoming Paper CCXX
Date: Tue, 3
Here are the Icons you so desire good buddy:-
http://www.cisco.com/warp/public/503/2.html
Let me know if these are the ones that you are looking for
.Peace!
From: EA LOUIE [EMAIL PROTECTED]
Reply-To: EA LOUIE [EMAIL PROTECTED]
To: "Weil Timothy R" [EMAIL PROTECTED], "Group Study"
htmlDIVGuys,/DIV
DIVnbsp;/DIV
DIVWould offering up a cisco 4000 router with 4 serial interfaces, 1 or 2 ethernet
interfaces, andnbsp;an extra token-ring module in a swap for 2 cisco 2501 or 2502
routers, considered a fair trade?/DIVbr clear=allhrGet your FREE download of MSN
Explorer at a
htmlDIVGuys,/DIV
DIVnbsp;/DIV
DIVI need some help on a flash memory issue here.nbsp; I was told that the flash
for the cisco series 2600 and some 2500 series router is compatible with those of the
Series 4000 and 4000-M routers.nbsp; Have you guys experienced this before?nbsp; I
urgently need
htmlDIVGuys, /DIV
DIV/DIVI am trying to find somewhere other than E-Bay that has a used
DIV/DIV
PSTRONGFive-in-One Synchronous Serial WAN Module(DB-60) interface /STRONGfor
sale. I am not good at this e-bay bidding stuff and think that one has to go in too
many circles and red tape to actually
htmlDIVGuys,/DIV
DIVnbsp;/DIV
DIVCould you please say if this is rack is appropriate enough for 6-8 routers in an
apartment lab setup?nbsp; IMG height=12 src="http://64.4.18.24/emwink.gif"
width=12nbsp;.Peace!!/DIV
DIVnbsp;/DIV
DIVnbsp;/DIV
DIVRay/DIVbr clear=allhrGet your FREE download
Hey guys,
Do you know whether or not the flash on a Cisco series 4000-m router can be
upgrade beyond 4meg say hm 16megs?
_
Get your FREE download of MSN Explorer at http://explorer.msn.com
_
Guys,
I guess I need to exercise a bit more patience next time. The problem WAS
the clockrate. The thing is that I did change the clock rate to 100 on
the DCE side before posting to the group but for some reason it kept
failing. However, this morning I tried it with a clockrate of
Hey guys,
I have two Cisco 4000 series routers with 4 serial interfaces each (DB60).
I recently bought some new cables and decided to try out the cables, and to
test out the interfaces for the first time since having the routers.
Anyway, whenever I connect either 1 of the 4000 series router
Guys,
What would be some of the remedies to packet drops on a LAN? I notice that
one of our CAT 6500 trunk ports are showing steady increse of RUNTS and
GIANTS while users are complaining of slowness and packet losses. Any
answers?
Who let tet the dogs out .ruff, ruff, ruff..?
From: "Allen May" [EMAIL PROTECTED]
Reply-To: "Allen May" [EMAIL PROTECTED]
To: "Natasha" [EMAIL PROTECTED],"CCIE Group study list"
[EMAIL PROTECTED]
Subject: Re: Ooo Priscilla!!!
Date: Thu, 8 Mar 2001 16:40:01 -0600
ROFL!!!
Guys,
Those of you whom have read the book entitled "Inside Cisco IOS Architecture
(CCIE Professional Development Series)" before or are familiar with any
previous work of the Author, how would you rate this book on a scale from
1-10?
How significant is it to the preparation process for the
Approximately one week ago someone mentioned that they knew of somewhere
that they could get used WIC cards for $130.
I would like to know if that person (or any other member for that matter)
could stare me in the direction on how to obtain affordable WIC cards for a
cisco 2525 router I would
Guys,
I am really trying to search high and low on the web for a sturdy, neat and
affordable rack system to place my 5 routers on at home, but have been
unsuccessful thus far. Can anyone out there help me?
I do not need anything too commercial because I have a small apartment and
already my
No need for sarcasim Albert, not everyone on the list is a guru or thinks on
the same level as you. I am not attack you buddy but merely saying that we
do not have to make others feel bad if they do not know something
..afterall that is the purpose for this forum isn't it? Peace man!
Not necessarily, don't you think these salaries depend on the market you are
in? For example New York, California, Texas, maybe Atlanta etc. I happen
to know that a CCNP can make a lot more money that $65K ...heck I know of
CCNA's that are making more that $65K both in New York and Atlanta.
Here is one on Cisco website:
http://www.cisco.com/pcgi-bin/tablebuild.pl/tftp
From: "Gayathri" [EMAIL PROTECTED]
Reply-To: "Gayathri" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: where can I download free TFTP server?
Date: Thu, 22 Feb 2001 14:32:43 +0800
www.solarwinds.com
"Sim,
Can anyone here please tell me where in the New York area I can register for
a solid, thorough, and affordable Check Point Firewall Class. I would
really appreciate this. Thank you.
Ray
_
Get your FREE download of MSN
Guys,
I have a cisco 2525 router and need to know where I can get two WIC
cards (serial interface) at a reasonable price. Can anyone out there in
group study land help me with this? Thanks
PS:
I also have an 8-port ISDN 4000 series module for sale, if anyone is
interested.
Boomie,
I recently purchased "Cisco ATM Solutions, by Galina Diker Pildush -
Cisco Press" which I heard is really good. I am just about to start reading
mine so I will see for myself ...Peace!
From: "Boomie Okeowo" [EMAIL PROTECTED]
Reply-To: "Boomie Okeowo" [EMAIL PROTECTED]
To:
Hey guys,
I have an 8-port ISDN module for the Cisco 4000 series router that I
would like to either sell or trade for something of equal value. If there
are any interested parties out there in groupstudy land, please feel free to
get back to me Peace!
Ray
Hey Guys,
Could you please take a look at these two racks and tell me which
one is more appropriate for 4-5 routers for a home lab? Thanks for whatever
help you can offer guys.
http://catalog.blackbox.com/BlackBox/Templates/blackbox/mainscreen.asp
Hey guys,
Could you say what would be a fair price for a Cisco 4000 series
router with 4 serial interfaces, 1 ethernet, and a token-ring module as a
throw-in? Thanks
Ray
_
Get your FREE download of MSN Explorer at
Guys,
I am trying get a CD burner, but am not very familiar with which ones
are good and which ones gives a lot of problems. Could someone make their
personal recommendations as to which one might be a good one to get right.
If not could you direct me to a website that will give me some
Hello Guys,
Can anyone please advise me on whether or not the Plextor 12x10x32x
Internal IDE CDRW is better buy than the current Yamaha 16x10x40 Internal
IDE CDRW Drive? I would appreciate some help in the decision process, based
on your experience or familiarity with these product.
53 matches
Mail list logo