adcast/multicast domains...
Priscilla
TP wrote:
>
> Dear Group,
>
> I need help about multiscast.
> This is a simple topology... I've to test some video streamer
> devices so I
> must generate multicast traffic.
> All video devices are connected to
Dear Group,
I need help about multiscast.
This is a simple topology... I've to test some video streamer devices so I
must generate multicast traffic.
All video devices are connected to a catalyst 3550xl.
We can reach the office LAN through the same catalyst, in particular from/by
fastethernet0/1.
Is it possible to Remove an h323 terminal registration from a cisco
gatekeeper before the aging time out?
If yes...
Thank you
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57098&t=57098
--
FAQ, list archives, and subscription
Group,
I've enabled T.38 on my two gateway.
Haw can I verify the fax trasmission is going in T.38?
I mean wich show or debug command can confirm the trasmission protocol?
Thanks,
Teresa
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55367&t=55367
-
Dear group,
I've a catalyst 3550: is it possible to set cos for outgoing frame and not
the
VLAN ID field?
I mean, I'd like to set priority and not a VLAN ID for frames coming from a
specified port.
Any suggestion, explanetion, will be appreciated.
TP
Message Poste
Group,
from debug h225asn1 we can see RAS messages and we can read
endpointIdentifier.
Anybody knows how is generated that string?
RasMessage ::= admissionRequest :{
requestSeqNum 5928
callType pointToPoint : NULL
callModel direct : NULL
endpointIdentifier {"6196296800
Group,
Does anybody know if there is a standard for switch over fax in
H323enviorments when G.729 coedec is available?
tks
Teresa
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52350&t=52350
--
FAQ, list archives, and subscrip
I have a cisco 2621 gateway voip/isdn, the gateway has fastethernet
interfaces to the lan/voip network and a 2vic BRI S/T TE connected to a ISDN
BRI.
Calls from a voip terminal to the pstn are OK.
Calls from pstn to a voip terminals are KO.
It seems I have no chance to digit the post-selection
7833]
Is their circuit up and active? Also, check the wiring.
--
RFC 1149 Compliant.
""TP"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear group,
> I have a cisco 2621 configured as voip/isdn gateway.
> I'm
Dear group,
I have a cisco 2621 configured as voip/isdn gateway.
I'm not in able to configure properly vic 2BRI S/T TE interface.
I've followed suggestion from this link
http://www.cisco.com/warp/public/129/bri-layer1.html#first
(shut, no shut, clear interface and isdn-tei-negotiation first-cal
Dear group,
do you have an answer for the question mentioned in obj?
Thanks in advance!
Teresa
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=46877&t=46877
--
FAQ, list archives, and subscription info: http://www.groupstudy.co
Group,
I have a LAN for data and voice traffic and a cisco 2621 as gateway
voip/pstn
with FXO interfaces.
I have to realize the same configuration with the same data/voice gateway BUT
with 4 BRI (Italy as NT interface)
What kind of interface I need?
Any suggestion will be appreciate,
Teresa
Group,
I have a LAN for data and voice traffic and a cisco 2621 as gateway
voip/pstn
with FXO interfaces.
I have to realize the same configuration with the same data/voice gateway BUT
with 4 BRI (Italy as NT interface)
What kind of interface I need?
Any suggestion will be appreciate,
Teresa
Dear group,
When my CPE comes up, it makes a dhcp request. The DHCP server is located on
a different subnet .Between dhcp client (CPE) and dhcp server there is a
router whit "ip helper-address" configured.
My question is the following: if the DHCP server has to assign a specific IP
address to a s
I'm reading the 6509 product overview and I could configure it with the
Switch
Fabric Module (WS-C5600-SFM or WS-X6500-SFM2).
Two questions:
- Which is the benefit of th SFM?
-Why I MUST install it in slot 5 or 6?
Thanks in advance,
Teresa
Message Posted at:
http://www.groupstudy.com/form/rea
42331]
Go here and grab the price list for everything. The chassis is 13k
which you have to fill up...
=
http://www.cisco.com/cgi-bin/front.x/pricing?Request=3DViewDownloadListPa=
ge
Dave
TP wrote:
>=20
> Anybody knows how much a new 10720?
>=20
> Just a rough
Anybody knows how much a new 10720?
Just a rough price
Thank you.
Teresa
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42331&t=42331
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Dear Group,
I'm confused.
In a multi-vendor enviroment I've to design a VLANs scenario.
So I can prefer 802.1Q tagging (standard) on the trunk link. And then? How
to
manage the VLAN informations?
Is VTP (or DTP) a cisco protocol?
Is there a standard in order to manage the vlan information dynamic
you can see www.netcentrex.net
It is a softswitch solution for billing, tracing and so on in a cisco voip
enviroment.
It is designed for H323 routed gatekeeper.
And it works perfectly with cisco devices.
Hope it helps.
Teresa
- Original Message -
From: Kiran Kumar M
To: [EMAIL PROTE
Dear Group,
In h323 enviroment I have to " bill" all the calls, VOIP calls too.
The billing system is "synchronized" with AS5300 and not with the Gatekeeper.
The question is "is there a way to force the intra voip calls (H323) through
the AS5300"?
Any idea
Thanks in advance,
Teresa
Messa
This is the runnunig configuration.
Thanks in advance.
Teresa
password:
RSIA>en
Password:
RSIA#sh run
Building configuration...
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname RSIA
!
n
to do so (unless you have WFQ
enabled on the router, as WFQ automatically classifies based on IP Prec or
DiffServ.). Look up MQC to create policies to do things with your marked
packets.
--
RFC 1149 Compliant.
""TP"" wrote in message
news:[EMAIL PROTECTED].;
can set the ToS bits on a switch. You can only set the
CoS bit and the CoS will not be translated to a ToS on router unless you
force it to in the configuration. ToS is a layer 3 function and CoS is a
layer 2 function
>From: "TP"
>Reply-To: "TP"
>To: [
Dear group,
i have the following situation:
a "special" switch connected to a cisco router via ethernet interface.
This switch is enable to set TOS based on its ports.
I'd like to configure the router in order to have different queuing based on
the TOS (two or three queues).
The router should rea
Count me in.
I've benefitted from this list for quite some time on Paul's dime.
It's long overdue that I kicked in a quarter or two!
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
John Neiberger wrote:
> Paul,
>
> Is there some mechanism by which we
Fabio,
If you want to telnet the router you have to know the dialer ip address
(after negotiation).
In the following expample you are opening a telnet session to 1660 port:
ip nat inside source list # inferface dialer0 overload
ip nat inside source static tcp (eth0 ip address) 23 (dialer0 ip ad
>you are not allowed to take anything in the exam room and this should go for
>all exams!
It is not correct...I was allowed to take coca-cola in the exam room :)
Ciao,
Teresa
From: Baker, Jason
To: [EMAIL PROTECTED]
Sent: Wednesday, September 26, 2001 7:01 AM
Subject: RE: Passed swi
reported in EIGRP
Updates.
If you want EIGRP's delay to be somewhat more realistic, you can tweak the
interface bandwidth.
Priscilla
At 02:06 PM 9/24/01, TP wrote:
>Group,
>what is the relation (if any) between the total delay I see in sh ip eigrp
>topology and the
Group,
what is the relation (if any) between the total delay I see in sh ip eigrp
topology and the total delay I see in a simple ping?
>From show eigrp topology I see total delay associated to a point-to-point atm
pvc lower than total delay showed for a E1 hdlc (between the same routers, 1
hop).
etherchannel and it will flap like that unless the switch is also
configured
for it. Hope this helps.
Jeff
>From: "TP"
>Reply-To: "TP"
>To: [EMAIL PROTECTED]
>Subject: fasteth relearning address [7:20515]
>Date: Thu, 20 Sep 2001 05:29:33 -04
Dear Group,
I log into myCatalyst 2924XL and I found the following error message:
%RTD-1-ADDR_FLAP: FastEthernet0/1 relearning 7 addrs per min
How can I proceed to troubleshoot this?
Thanks in advance,
Teresa
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20515&t=
Dear Group,
I have a 801 ISDN router: it sends a call even if (apparentely) no ip
request
are coming to.
I've enabled the debug ISDN q931 and debug ip packet.
And I can observe the following:
00:26:27: IP: s=10.10.10.6 (Ethernet0), d=10.10.10.255 (Ethernet0), len 78,
rcvd 3
00:26:28: IP: s=10.1
If I have:
1)conf register set to 0x1... (from ROM)
2) boot system falsh: image.bin
to the next reload what happens?
It will boot from ROM or FLASH?
Who wins, config register or the first command line?
Thank you
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18397&t=18397
33 matches
Mail list logo