Dear Ciscoers
please anybody give me a remarks of CCNP Support Exam for AppleTalk
Questions!!!
Tks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dear All,
Any body have experience with sybex/syngress for CCNP Support (640-506)?
Which one is good?
Tks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Any body knows, how to change the Mode operation from Catalyst Supervisor
IOS mode to Catalyst Softaware on Catalyst 6509?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Dear All.
Anybody know what the default ICMP packet timeout on Windows TCP/IP and how
to change the value.
Thank you
Wibowo
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
type dir flash: to see whether your IOS is missing,
to do disaster recovery change the default baud rate to 115200 to make it
faster than 9600 but don't for get to change the baud rate on your
hyperterm.
-Original Message-
From: Ahmad bilal [mailto:[EMAIL PROTECTED]]
Sent: Monday,
Dear Nathan,
Currently i am installing Pix Firewall Manager ver 4.3(2)e, it's not smooth
as i read in a CCO.
We have a problem when loading PIX configuration. It seems that the PIX
cannot send the config to PFM server.
I have open the telnet for PIX manager.
Hosts spec are:
Windows NT server
Dear Cisco Guys,
I'm just connecting two routers using Fram Relay as a bridge. Below is net
diagram:
PC A --Router A(HQ)F/R cloud-Router B(Br)-PC B
Ping from router A to Router B : OK
ping from router B to router A : OK
Ping from PC A to Router A : OK
Ping form router A
dear all,
I have a problem while connecting AS5300 to Radius Infranet(by portal), from
the infranet log(shown at the bottom) there is only 1'st start accounting
packet that not recognize a frame-IP-address (202.137.113.39), is there any
parameter in AS5300 or Infranet that we should configure to
I have Cisco 7206 running IOS 12.0(7)T, and Fast Ethernet modules in Slot 1
2. While I work for it, there is a message in a console:
Fastethernet 2/0 cable/connector problem?
or
Fastethernet 1/0 cable/connector problem?
This message appear when Fastethernet INterface configured as
9 matches
Mail list logo