Wireless AP Chaining [7:66270]

Anyone know the maximum number of Wireless AP's you can chain of a single wireless bridge ie Switch ---copper---> AP ~~~air~~~> AP ~~~air~~~> AP Does cisco make an AP that supports this Thanks -Paul PLEASE READ: The information contained in this email is confidential and intended for the named

RE: US Stock [7:19433]

To be precise it doesn't. read the originals yourself and stop the hysteria http://www.sacred-texts.com/nos/ -Original Message- From: Matthew Crane [mailto:[EMAIL PROTECTED]] Sent: 12 September 2001 14:19 To: [EMAIL PROTECTED] Subject: Re: US Stock [7:19433] To be precise the actual

RE: US Stock [7:19433]

I suggest you go back to your newsgroup and educate them Nostradamus died on July 2nd 1566 None of the text that you have reported appear in any of his quatrain's What happened yesterday was an evil act committed by cowards You insult all those innocent people by proporting that what happened yes

RE: question regarding spanning tree [7:6485]

Heather, Its the received port id You should find that port 1/2 is connected to the 6509 on a lower port than port 1/1 do a sh cdp neigh to confirm Hope this is correct -Paul -Original Message- From: Buri, Heather H [mailto:[EMAIL PROTECTED]] Sent: 30 May 2001 18:20 To: [EMAIL PROTECTE

RE: Show log command in switch [7:4138]

show logg buff -Original Message- From: Cisco Newbie [mailto:[EMAIL PROTECTED]] Sent: 11 May 2001 08:02 To: [EMAIL PROTECTED] Subject: Show log command in switch [7:4138] All Guru, I would like to know is there any similiar command in Cisco switch(C4006) that allow us to "show log"? J

RE: what wrong with the access-list?? [7:1825]

These are answers to your questions, although i wouldn't simply use these answer to configure this router. 1) you need to upgrade your IOS (not sure what to exactly 12.x will do it) 2) you should use ACL numbers 100-199, also use Deny, don't need the eq any ie sin-net(config)#access-list 101 den

RE: spanning tree [7:1754]

I would, otherwise you have no guarantee which bridge will becomer the root bridge for vlan 1. You might end up with a dodgy low performance switch becoming root, or it could cause a "sub-optimal" forwarding path to be created consisting of a number of bridge hops. This could cause an issue when

Here's an easy one

Ok so we know how to convert a multicast ip into a mac, how about the reverse. I got a syslog message that made me curious:- "invalid traffic from multicast source address 0f:37:59:6f:df:0d" and i thought well i wonder what ip address that would be but i couldn't figure out the first octet. Shou

Route-maps and statics

Hi Is there a way of redistributing a number of static routes into eigrp, whilst altering the cost of just one of them I thought i'd be able to do it with a route-map statement but i'm having a bit of trouble getting it to work Any help would be grateful Thanks -Paul PLEASE READ: The informati

RE: they don't want us in Scotland

Sam, Quick search on jobserve reveals 31 cisco jobs in scotland I'd answer your question with another. Would you let a mechanic who has passed a written test but who has never even seen an engine loose on your car? Good luck -Paul -Original Message- From: Sam Fraser [mailto:[EMAIL PRO

RE: Portfast ???

You can and should have links connected to other switches/hubs/routers that are portfast enabled. However you should leave portfast disabled when there is resiliency between 2 network devices which would cause a spanning tree loop. -Paul -Original Message- From: Donald B Johnson Jr [mai

RE: ISDN Switch T ype

Yeah you've just got a different version of ios >From the horses mouth, ie CCO release notes for 11.3(3)T National ISDN Switch Types for BRI and PRI National ISDN Switch Types for Basic Rate and Primary Rat

RE: Nobody able to help me ?

Methinks that the amount of Octets received on port 1/1 on sup is 1.3.6.1.2.1.16.1.1.1.4.32 Port 1/2 is 1.3.6.1.2.1.16.1.1.1.4.48 I think they increase in multiples of 16, and alos they are a counter so it will increase with ever poll. So find out what port you want to monitor and do the maths

RE: access list is not working! why?

our dns resolves www.radiowave.com to 64.37.194.252 www.entrypoint.com to 205.228.184.11 Regards -Paul -Original Message- From: beth shriver [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 05, 2000 9:16 PM To: [EMAIL PROTECTED] Subject: access list is not working! why? here is a V

RE: MRTG and OID's

I don't think you're fixing the real problem. You should configure the dialer-lists so that only interesting traffic is allowed to bring up the isdn line and keep it up. If you fix this then you won't need mrtg. -Original Message- From: Jeroen Timmer [mailto:[EMAIL PROTECTED]] Sent: Wed

RE: VLAN problem ?

Phil Barker [mailto:[EMAIL PROTECTED]] Sent: Friday, August 25, 2000 11:52 AM To: Williamson, Paul; cisco GroupStudy Subject: RE: VLAN problem ? Paul/Robert, Thanks for the response, The port isn't currently set as a trunk port. QED. Does the setting of a trunk port have any connectio

Compresssion

Hi not really specific to a certification but just wondered if anyone could decipher the following output relating to compression over a serial line Is the output basically saying that on traffic transmitted from the router i'm getting 2.1:1 compression ratio and on traffic being received on th

RE: EIGRP good design guidelines needed

Doh typo command should be ip summary-address eigrp 20 192.168.115.0 255.255.255.240 TIA -Paul -Original Message- From: Williamson, Paul [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 02, 2000 10:46 AM To: [EMAIL PROTECTED] Subject: EIGRP good design guidelines needed Hi Not sure

RE: EIGRP good design guidelines needed

Doh typo command should be -Original Message- From: Williamson, Paul [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 02, 2000 10:46 AM To: [EMAIL PROTECTED] Subject: EIGRP good design guidelines needed Hi Not sure if i can do this (there is no problem that i am trying to solve

EIGRP good design guidelines needed

Hi Not sure if i can do this (there is no problem that i am trying to solve, just wondering if its good design principles) Basically i have 2 routers in a core. One router could connect to networks. 192.168.115.0 /30 192.168.115.4 /30 192.168.115.8 /30 192.168.115.12 /30 The other to 192.168.11

RE: network mangement program...

http://www.riversoft.com/ I believe this will be the network management tool of the future. -Original Message- From: Ledwidge, Feargal [mailto:[EMAIL PROTECTED]] Sent: Monday, July 10, 2000 7:31 AM To: cisco Subject: RE: network mangement program... Take a l