Router reset [7:32180]

Hi All, I have a router 7206 and reset occasionally. Anyone knows what is the reason that will cause a router reset? Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32180t=32180 -- FAQ, list archives, and subscription

Access-list NAT [7:31152]

Hi, If I have access-list and NAT in my router, anyone knows which one will apply first. Thanks. Francis Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31152t=31152 -- FAQ, list archives, and subscription info:

Cisco switch packet loss [7:29571]

Just checking if anyone has experience regarding packet loss on Cisco switch 2924XL and 2940XL. I found that the cisco switch drops packet. It is more serious on 2940XL. Is there any switch mode I have mis-configure? Or it is a known bug on the switchs? Thanks. Francis Message Posted at:

Clockrate vs Bandwidth [7:26640]

Hi All, As I know that when you connect two routers with back-to-back cable and one of the routers has to set the clockrate to be the DCE end. Basically, the clockrate is limit the speed of the serial link. And the bandwidth is only for the routing. But someone told me that the bandwidth can

Latest CCIE number [7:24028]

Anyone knows what is the latest CCIE number or where to check the latest number? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24028t=24028 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html

CCIE latest Number [7:24031]

Anyone knows what is the latest CCIE number or where to check the latest number? Thanks. Francis Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=24031t=24031 -- FAQ, list archives, and subscription info:

Re: CCIE latest Number [7:24031]

To: Sent: Thursday, October 25, 2001 12:40 AM Subject: Re: CCIE latest Number [7:24031] I have a coworker just got his CCIE last Friday and his number is 8285. kwock99 wrote in message news:... Anyone knows what is the latest CCIE number or where to check the latest number? Thanks

Re: IOS upgrade problem - 2621 [7:23526]

, or whatever has a valid image), set the necessary variables, and then type tftpdnld again. If all variables are set correctly the router will now begin a tftp transfer. When it is finished, type i or reset to reboot the router. HTH, John kwock99 10/19/01 9:57:44 AM I have upgraded the Router

EIGRP load balancing - variance command [7:23623]

I have tried some basic testing on the EIGRP load balancing. For simplicity, I only set up 4 router in order to get equal cost load balancing. LANA**R1 --R2 --R4 LANB ||

IOS upgrade problem - 2621 [7:23526]

I have upgraded the Router with the other IOS. After I download it to the router and it saved the new IOS to the flash successfully. After I power up the router, I get the error that the router does not have enought memory to run IOS. Anyone knows how to erase the new IOS and tftp back the old

Multicast traffic PIX [7:19946]

Hi All, I have tried to let the multicast traffic passing through the PIX firewall using Version 5.1 with the following command. access-list 100 permit icmp any any access-list 100 permit tcp any any access-list 100 permit udp any any access-group 100 in interface outside access-list 101 permit

Multicast traffic pass through PIX [7:19780]

Hi All, I need to configure the PIX firewall to let the multicast traffic passing through. Does anyone know what is the protocol/port number for the following: - Cisco IP/TV - Microsoft Media Player - *.asf and *.nsc video streaming file Thanks in advance. Francis Message Posted at:

Multicast traffic tunnelling [7:19267]

Hi All, Just checking anyone has the experience on the multicast tunnelling configuration. I have configured three routers to use the Sparse mode for multicast traffice and they works perfectly. After I remove the centre router command, ip pim sparse-mode and try to use the tunnel to conect

Re: Multicast traffic tunnelling [7:19267]

Thanks. I think I have put the ip pim x command. - Original Message - From: Marcos Hernandez To: Sent: Monday, September 10, 2001 11:17 PM Subject: Re: Multicast traffic tunnelling [7:19267] You are missing the ip pim x command withing the Interface Tunnel config. kwock99 wrote

HSRP - use-bia [7:16544]

Hi All, Anyone knows what is the benefit to use the command standby use-bia in HSRP rather than the Virtual Mac Address. Thanks. Francis Tsui Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16544t=16544 -- FAQ, list archives,

RIP -- suppressing null update [7:15469]

Hi All, One of my router does not recieve the routing update on RIP. Here is the show ip protocol. R4#sh ip prot Routing Protocol is rip Sending updates every 30 seconds, next due in 3 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all

Keep losing Cisco 3640 startup config [7:14376]

Hi, I have a Cisco 3640 router and found that everytime I power down the router, the startup config is missing and restart the setup. I have copy run start many times. Anyone has the idea to fix it? Best regards Francis Tsui Message Posted at:

Re: delay command [7:14071]

Thanks for your info. I do not have a chance to test your command. Just curious what does the Delay command do? Francis Tsui - Original Message - From: Farhan Ahmed To: 'kwock99' ; Sent: Sunday, July 29, 2001 4:35 PM Subject: RE: delay command [7:14071] try dialer hold-queue

delay command [7:14071]

I am trying to look for an router command to delay sending out the traffic through a serial interface. Hopefully, it would simulate the real life case when traffic passing through the WAN interface. By tuning the delay figure, we would find out how long the application at both end can take before