I used the one in Dallas for Advance BGP, great course and the receptionist
was hot.
- Original Message -
From: "David Vital"
To:
Sent: Tuesday, November 12, 2002 10:16 AM
Subject: Has Anyone used Global Knowledge? [7:57297]
> Wondering if anyone here has experience with Global Knowle
Hello,
I am trying to put together a case study pertaining to Cisco Telephony,
if
any of you experience with this subject matter would respond I would greatly
appreciate it.
Thanks.
1. Does Cisco use IP Telephony? If so, how?
2. What are the major business capabilities to Cisco that are
Nevermind...I found it... TAC's new website is nice, but takes some getting
used to. Ctrl-C x 3. LOL..
- Original Message -
From: r34rv13wm1rr0r
To: [EMAIL PROTECTED]
Sent: Monday, November 04, 2002 3:33 PM
Subject: ***SWITCH CONSOLE COMMAND***
Hello all,
Hello all,
When repairing a failed flash in 6509 w/MSFC I had to use the switch console
command to be able to set up the boot boot variable for the router since the
flash was replaced. I do not have physical access to these boxes on a daily
basis but I can reach them via a console server or SSH.
Which IOS release has the DHCP server software? It is for a 25xx router.
IP
IP PLUS
IP ENTERPRISE
IP SP
Thanks...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55102&t=55102
--
FAQ, list archives, and subscription info: http
Is there a way on a 6509 to filter a port from seeing a traffic from a cetain
MAC when the two hosts are on the same VLAN. The problem is one host keeps
broadcasting NTP updates every 40 secs and the Pix SYSLOG is contantly
logging
it. Since the NTP host does not go through the firewall I was wo
r a station that is just doing network management type
> tasks, for example.
>
> Priscilla
>
> r34rv13wm1rr0r wrote:
> >
> > This is from a tcpdump off of one of my core switches. It
> > appears that it is
> > logging a duplicate packet with the same SEQ #. Does any
This is from a tcpdump off of one of my core switches. It appears that it is
logging a duplicate packet with the same SEQ #. Does any one have any idea
why this is occuring?
Thanks,
A
11:18:04.688408 172.X.15.49.netbios-ssn > 172.X.61.103.1066: P 1:65(64) ack
49
win 8320NBT Packet (DF)
11:18:
No. The collision domain on a hub is shared throughout causing each port to
listen before transmitting. A switch on the other had limits the collision
domains by port therefore allowing the host to transmit at will.
- Original Message -
From: "Saravanan L"
To:
Sent: Tuesday, Septembe
If I am not mistaken, and forgive me if I am since it has been a while since
I worked with a 5k/RSM setup. I believe that you only need to incorporate
the MLS IP RP stuff if you are in the "Router on a Stick" configuration
meaning if you have a some 72xx or 75xx's out there doing your VLAN routin
It is also possible that your bootflash is faulty, as I have just had one go
bad in a 6509. 1 out of 3 times it would actually verity the CatOS images
OK, most times it would say bad CRC checksum and I tried different downloads
and TFTP servers to make sure the images was fine. Cisco RMA'd a new
Your "do" command is this
router(config)#downward-compatible-config ?
. Version number
router(config)#downward-compatible-config
- Original Message -
From: "Moffett, Ryan"
To:
Sent: Friday, July 26, 2002 10:46 AM
Subject: RE: Check this new command out [7:49717]
> I have the
Is there any way to copy images to the PC-Card based Flash using a laptop,
either with a special card reader or using software and the PC-Card slot on
a laptop? I am just curious if I could copy IOS images for distribution to
the Flash card using my laptop then take card to the devices and load I
Foundry makes great products! On product in particular that blows Cisco
away is their ServerIron Load Balancers. Cisco made a big mistake by
buying Arrowpoint, and badging them the CSS line of equipment. As far as
Foundry's switches go, they are very comparable. They use a Cisco replica
comma
Foundry makes great products! On product in particular that blows Cisco
away is their ServerIron Load Balancers. Cisco made a big mistake by
buying Arrowpoint, and badging them the CSS line of equipment. As far as
Foundry's switches go, they are very comparable. They use a Cisco replica
comma
15 matches
Mail list logo