Hello,
Quick question that I am having trouble locating the answer on.
Basically I need to know whether you can configure PAT to work in
conjunction with a NAT pool on an IOS router. 12.2.x on 2621?
Ex. Nat pool of 192.168.1.10-192.168.1.20 Once all nat pool IPs are
taken. Roll to a PAT on
to the outside for the specific hosts that I want, and let the rest
PAT.
Hopefully this makes sense.
-Adam
MADMAN wrote in message
news:200210241940.TAA32116;groupstudy.com...
do you mean:
C2620B(config)#ip nat inside source list 1 pool MADMAN overload
Dave
trammer wrote:
Dave,
Can
NAT
and others will PAT, it does not wait until the last address in the pool
is used before converting to PAT.
Dave
trammer wrote:
Hello,
Quick question that I am having trouble locating the answer on.
Basically I need to know whether you can configure PAT to work in
conjunction
check out www.directron.com as well for USBDB9 cables. Works well.
hktco wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
This is what you'll need as a short-term solution. I tried it before and
it
works.
http://www.bafo.com/proddetail.cfm?ID=395
Just a way to turn a USB
I use www.readyhosting.com for a couple of my sites for the last 2 years.
Site is fast, lots of features, mail server lags once in a while but other
than that seem pretty decent.
$100/year which isn't bad either.
Check out www.cnet.com for web hosting comparison charts too.
cheers
sam
Thanks all for the help.
I've got the config in correctly and had it working fine for a little bit,
but once I did a reboot the box acts very strange. Basically can't get
console access back into the box without doing a default configuration
(holding down the default button while booting)
To
Got it working finally. Misinterpreted the * meaning. :) oops.
Tweaked a few other things on the lines too. Works fine now.
Thanks for the assitance guys.
trammer wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Thanks all for the help.
I've got the config in c
By any chance would anyone have a sample config for the 500-CS box that they
wouldn't mind posting.
Trying to get reverse telnet working and most configs are for the 2509-2511.
I'm either not looking in the right place or I'm not configuring it right
for this older box.
Thanks in advance.
You may want to check out the Partner E-Learning section of Cisco's website.
If you have a CCO id you can access some of their VoD and web based FREE
training such as IP Telephony Fundamentals.
Cheers
Mahesh wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Any one can
What type of FXO card are you using?
VIC-2FXO ?
I was speaking with one of our local Cisco office SE's and they are pushing
the VIC-2FXO-M1 which has the reversal on it and may help with your
problems.
Just a though.
They are the same list price still.
Cheers
Pc9101 wrote in message
[EMAIL
Jim's correct. If you can't come up with some more information regarding
your scenario, its difficult for members of the group to point you in the
right direction.
Check out this link for some help:
http://www.cisco.com/univercd/cc/td/doc/product/voice/ip_tele/
Regards.
Jim Bond wrote
Steven is correct.
There are ways of getting CCM to load on non-certified platforms, but is
obviously is not supported whatsoever by TAC.
We utilize a configuration such as this in our traveling demo pod for
customer demos on IP Telephony. I personally worked with some of our local
Cisco SE's
I guess just to look at it from a high level or simple view is to evaluate
your network and business needs when it comes to the firewall topic and
evaluate the importance of the firewall in both your network needs and as a
business need.
If you feel that the firewall aspect of your network does
Is the global link for sample configuration sheets for all the cisco
products.
MADMAN wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Here is a good page to start with:
http://www.cisco.com/warp/customer/793/access_dial/index.html
Dave
Muhammad Faheem wrote:
Hi All,
Show version will show this as well.
Under the Processor Board ID
IT Guy [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Guys,
Can anyone here please help what are the possible software ways to findout
the serial number of router without looking at the
http://www.cisco.com/kobayashi/technotes/serv_tips.shtml
Is the global link for sample configuration sheets for all the cisco
products.
MADMAN [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Here is a good page to start with:
I agree.
This CIM will touch on VOIP primarily and not VOATM and VOFR really.
No advanced qos configuration utilizing crtp, llq, rsvp, etc. either which
would be nice.
Good for an intro to VoX technology in general but not too great for prep
for say the Cvoice exam.
cheers
Alberto Martin
Just looking to bounce some questions off anyone who has integrated a castel
fax server with DID faxing capabilities with Callmanager and Unity Voice
mail install.
I will explain what my situation is further if anyone has played with this.
thanks!
adam
Message Posted at:
he spoke routes? sure you're not
looking at a classic frame relay mapping problems?
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
trammer
Sent: Tuesday, July 10, 2001 9:27 PM
To: [EMAIL PROTECTED]
Subject: Pix not routing for Frame Spokes
Don't let the subject mislead you in my intention but here is my situation
if anyone would like to take a look.
I've got multiple locations connected via frame coming into a 2610 @
10.1.1.5:
10.2.0.0
10.3.0.0
10.4.0.0
10.5.0.0
10.6.0.0
10.7.0.0
The 2610's default route is to 10.1.1.1 which is
I have a quick question for someone who can give me confirming information
on whether or not the Catalyst 4006 will support being an Appletalk Zone
Seed Router?
If you have any reference links that state this it would be even better.
Maybe I didn't go far enough into the documentation, but I
Can anyone give me the proper name or part number for a cable that I can use
to connect a 2502 Token Ring router to an RJ45 based Token Ring switch. I
know there is the DB9 to Type 1 cables available, I just must be missing the
boat on the name for DB9 Male to RJ45 cable that it seems like I
22 matches
Mail list logo