d of any others.
--Mike
-Original Message-
From: Maccubbin, Duncan
To: [EMAIL PROTECTED]
Sent: 12/13/00 7:47 AM
Subject: RE: % Warning: cannot change link type
then tried to delete it and bring it back up as a point-to-point. You
will
get this error with 11.x IOS. Delete the interface
---
From: "les flack" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 13, 2000 5:55 AM
Subject: % Warning: cannot change link type
Help,
I have a 3600 @ 11.3 which is running as a frame switch on some ports
and I am trying to c
int s0/0.2 point-to-point
> % Warning: cannot change link type
>
> Which results in the following configuration
>
> interface Serial0/0
> no ip address
> no ip mroute-cache
> encapsulation frame-relay
> !
> interface Serial0/0.1 point-to-point
> no ar
PROTECTED]]
Sent: Wednesday, December 13, 2000 8:56 AM
To: [EMAIL PROTECTED]
Subject: % Warning: cannot change link type
Help,
I have a 3600 @ 11.3 which is running as a frame switch on some ports
and I am trying to configure some of the other ports as routed
point-to-point sub-ints.
But when
frsw1(config)#int s0/0.2 point-to-point
% Warning: cannot change link type
Which results in the following configuration
interface Serial0/0
no ip address
no ip mroute-cache
encapsulation frame-relay
!
interface Serial0/0.1 point-to-point
no arp frame-relay
!
interface Serial0/0.2 multipoint
no
5 matches
Mail list logo
