I also tried "debug serial interface", only see myseq , other side are
always 0, also the "show interface serial" shows the number interface resets
and carrier transition are increasing all the time.
Thanks
- Original Message -
From: "Wei Zhu"
To: "Leo Song" ;
Sent: Wednesday, December
It's probably misconfigured. What is the config of this router and the other
router?
Wei Zhu wrote:
>
> I also tried "debug serial interface", only see myseq , other
> side are always 0, also the "show interface serial" shows the
> number interface resets and carrier transition are increasing
> a
you sourcing clock from one side of this or tried another cable?
Brian
- Original Message -
From: "Wei Zhu"
To:
Sent: Wednesday, December 18, 2002 6:11 PM
Subject: Re: 2514 serial port flipping between up and down, [7:59501]
> I also tried "debug serial interfac
Sent: Wednesday, December 18, 2002 6:11 PM
> Subject: Re: 2514 serial port flipping between up and down,
> [7:59501]
>
>
> > I also tried "debug serial interface", only see myseq , other
> side are
> > always 0, also the "show interface serial" sho
This may be dumb question, but I have seen this happen when connecting a
high speed port to a low speed port. One side is default to 1544 and the
other cannot do better than 64K.
So, what are you connecting to, specifically - 2514 to 2522?
Again, I might not be in the loop, but thought I would p
I tried to connect to 2501, even use DCE/DTE to interconnect serial0 and
serial1 on 2514, seems the signal cannot go to the line.
Thank you.
- Original Message -
From: "Ted Marinich"
To:
Sent: Thursday, December 19, 2002 5:28 PM
Subject: Re: 2514 serial port flipping betw
inal Message -----
> From: "Ted Marinich"
> To:
> Sent: Thursday, December 19, 2002 5:28 PM
> Subject: Re: 2514 serial port flipping between up and down,
> [7:59501]
>
>
> > This may be dumb question, but I have seen this happen when
> connecting a
> >
maybe that part is bad.
Thanks
- Original Message -
From: "Munit Singla"
To:
Sent: Thursday, December 19, 2002 12:07 PM
Subject: Re: 2514 serial port flipping between up and down, [7:59501]
> Please send your configuration and debug o/p then only something could be
8 matches
Mail list logo
