hi friends
I am in deep trouble
yesterday i downloaded 12.0 IOS into my 2610 router from my TFTP server.
downloading was successful. in fact i deleted old version while upgrading.
after that my router is not booting at all.
what to do?
please help me.
bye
ravee
_
First check to see if your IOS image to upload is valid. i.e. Checksum and
Filesize are correct as per cisco's website
Your 2610 should be still able to boot to the Rom Monitor. e.g. rommon 4 >
You can use the tftpdnld command from the ROM Monitor to tftp from your P.C.
rommon 5 > tftpdnld
AIL PROTECTED]]
Sent: Wednesday, February 07, 2001 3:00 PM
To: [EMAIL PROTECTED]
Subject: 2600 router - critical situation
hi friends
I am in deep trouble
yesterday i downloaded 12.0 IOS into my 2610 router from my TFTP server.
downloading was successful. in fact i deleted old version while upgrad
you might have deleted the new ios.
In general, during IOS upgrade router show us some message like 'erase current
flsah ios'(not precise) before starting ios-uploading..
After 'successful'message' imediately did the router getting bootup sequence? is
there some confirm message to confirm the r
Sent: Tuesday, 06 February, 2001 23:00
Subject: 2600 router - critical situation
> hi friends
>
> I am in deep trouble
>
> yesterday i downloaded 12.0 IOS into my 2610 router from my TFTP server.
> downloading was successful. in fact i deleted old version while upgrading.
If your router is not booting, send a signal from the console port while it's
attempting to boot and this will take you to ROMMON mode. From there you can attempt
to load the IOS onto it again. Make sure you really have the correct IOS. I did
something similar, except in reverse: I tried t
hi friends!
thanks for u r reply.
but i tried to reboot the router even the break signal
is not coming.
we applied both cammands "break and control breake"
but these commend are also not taking.
even the old version of the router also not getting.
what to do?
reply soon
bye and thanks in advance.
> - Original Message -
> From: "Ravi Kumar" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, 06 February, 2001 23:00
> Subject: 2600 router - critical situation
>
>
> > hi friends
> >
> > I am in deep trouble
>
hi friends!
thanks for u r reply.
but i tried to reboot the router even the break signal
is not coming.
we applied both cammands "break and control breake"
but these commend are also not taking.
even the old version of the router also not getting.
what to do?
reply soon
bye and thanks in advance.
> - Original Message -
> From: "Ravi Kumar" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, 06 February, 2001 23:00
> Subject: 2600 router - critical situation
>
>
> > hi friends
> >
> > I am in deep trouble
>
ri Babu
> Sent: Wednesday, 7 February 2001 21:34
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: 2600 router - critical situation
>
>
> hi friends!
> thanks for u r reply.
> but i tried to reboot the router even the break signal
> is not coming.
> we
ened to the router since the last time you
> saw it work?
>
>
> Albert
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Srihari Babu
> > Sent: Wednesday, 7 February 2001 21:34
> > To: [EMA
2001 11:00 PM
To: [EMAIL PROTECTED]
Subject: 2600 router - critical situation
hi friends
I am in deep trouble
yesterday i downloaded 12.0 IOS into my 2610 router from my TFTP server.
downloading was successful. in fact i deleted old version while upgrading.
after that my router is not
after I reboot. (yes I did a wri mem :0 )
Karl
-Original Message-
From: Srihari Babu [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 07, 2001 6:43 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: 2600 router - critical situation
hi
thanks for u r reply.
actually my rout
The break signal is dependent on the software you are using. For instance, if you are
using Procomm, it is Alt + B, so that might be another one to try. I haven't had any
experience with other terminal software recently, so I can't think of anything else
there.
Also, try hitting those key co
15 matches
Mail list logo