Most likely you are on a different VLAN than your sup, try
set ip route default gateway will be the VLAN on the RSM
that you sup card is part of.
Dave
khramov wrote:
>
> I've got a 5505 and I can not telnet into the switch portion of it from
> my work station. To get into it I have ot t
because you need to configure an ip route to the outside world on the switch
to tell it where its default gateway is (similar to a workstation)
- Original Message -
From: "khramov"
To:
Sent: Thursday, September 13, 2001 7:21 AM
Subject: Re: 5505 [7:19754]
> Yes it d
-
> From: "khramov"
> To:
> Sent: Thursday, September 13, 2001 7:21 AM
> Subject: Re: 5505 [7:19754]
>
> > Yes it does have a SC interface. And that is the one that I am trying to
> > telnet into.
> > Default gateway is RSM.
> >
> > "
does have an RSM installed? If so, does the sc0 have an IP address and
>default gateway (probably the RSM) set?
>
>BJ
>
>
>
>-Original Message-
>From: khramov [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, September 13, 2001 9:47 AM
>To: [EMAIL PROTECTED]
>S
ave an IP address and
> default gateway (probably the RSM) set?
>
> BJ
>
> -Original Message-
> From: khramov [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 13, 2001 9:47 AM
> To: [EMAIL PROTECTED]
> Subject: 5505 [7:19754]
>
> I've got a 5505 and I
Can you atleast ping the ip address that you are trying to telnet into.
That
will tell you if you atleast have a good net connection
-Original Message-
From: khramov [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 13, 2001 9:47 AM
To: [EMAIL PROTECTED]
Subject: 5505 [7:19754]
I
er 13, 2001 9:47 AM
To: [EMAIL PROTECTED]
Subject: 5505 [7:19754]
I've got a 5505 and I can not telnet into the switch portion of it from
my work station. To get into it I have ot telnet into RSM module first
and from there I telnet into the switch intself. I check 5505 it does
not have an
I've got a 5505 and I can not telnet into the switch portion of it from
my work station. To get into it I have ot telnet into RSM module first
and from there I telnet into the switch intself. I check 5505 it does
not have an ip permit list configured on it. So why I can not telnet
into the swi
8 matches
Mail list logo