The Layer3 version is different from Cat OS.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kevin Wigle
Sent: Tuesday, November 07, 2000 12:01 AM
To: Cisco
Cc: [EMAIL PROTECTED]
Subject: Re: Rép. : Cisco Switch 2948G-L3 Question
Ok, as I said I
g gets you there to)
>
> Not sure this helps, I don't have a 2948G-L3 to play with but if it has
the
> same IOS as the Cat 5000 this should apply.
>
> Kevin Wigle
> CCDP/CCNP........
>
>
> - Original Message -
> From: "Thierry MARTIN" <[EMAIL PROTECTED]>
> To
Cat 5000 this should apply.
>
> Kevin Wigle
> CCDP/CCNP
>
>
> ----- Original Message -
> From: "Thierry MARTIN" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Saturday, 04 November, 2000 12:44
>
to play with but if it has the
same IOS as the Cat 5000 this should apply.
Kevin Wigle
CCDP/CCNP
- Original Message -
From: "Thierry MARTIN" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, 04 November, 2000 12:44
hello,
Cisco switch 2948-L3 are IOS and each VLAN must be considere as Virtual Bridge.
For VLAN 1, each port must have command "bridge-group 1"
and you do create a BVI with number 1.
The ip address for this VLNA will be in the BVI interface.
Is it a configuration BRIDGE IRB.
Your config will
Yeah I'm using IRB and the port 48 is still in Bridge Group 2
Manoj Ghorpade
Rodgers Moore wrote:
Are
you using IRB? and did you remove port 48 from bridge group 2? Rodgers
Moore
"Manoj
Ghorpade" <[EMAIL PROTECTED]>
wrote in message news:[EMAIL PROTECTED]...Hi
Group,
I have a Cisco 2948G-L3 s
Are you using IRB? and did you remove port 48
from bridge group 2?
Rodgers Moore
"Manoj Ghorpade" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...Hi Group, I have a Cisco 2948G-L3 switch and want to setup
the management on the switch.I tried doing things the documentati
7 matches
Mail list logo
