Um, probably a silly one for you all.
I have a 1721 router at either end of a leased line. I telnet into the
router and:
Router#debug serial int
Serial network interface debugging is on
Router#terminal monitor
And nothing. Shouldn't I get some debug messages here, keep alives and such
between th
Do a "show log" and see if logging is disabled
You might need to do a "logging on"
-Original Message-
From: James Gosnold [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 03, 2003 12:38 PM
To: [EMAIL PROTECTED]
Subject: Debug display to VTY [7:66762]
Um, probably a s
Hi Robert,
This is what I have.
Router#show log
Syslog logging: enabled (0 messages dropped, 0 messages rate-l
Console logging: level debugging, 413770 messages logged
Monitor logging: level debugging, 285 messages logged
Logging to: vty6(0)
Buffer logging: disabled
Lo
conf t
logging console
- Original Message -
From: "James Gosnold"
To:
Sent: Thursday, April 03, 2003 9:37 AM
Subject: Debug display to VTY [7:66762]
> Um, probably a silly one for you all.
>
> I have a 1721 router at either end of a leased line. I telnet in
, 2003 1:47 PM
To: [EMAIL PROTECTED]
Subject: RE: Debug display to VTY [7:66762]
Hi Robert,
This is what I have.
Router#show log
Syslog logging: enabled (0 messages dropped, 0 messages rate-l
Console logging: level debugging, 413770 messages logged
Monitor logging: level debugging, 285
James Gosnold wrote:
> Um, probably a silly one for you all.
>
> I have a 1721 router at either end of a leased line. I telnet into the
> router and:
>
> Router#debug serial int
> Serial network interface debugging is on
> Router#terminal monitor
>
> And nothing. Shouldn't I get some debug messa
Hi, this seemed to do the trick, thanks.
Just found it confusing as having gone through the various CCNA literature
it seems to ram home that all you need enter is the 'terminal monitor'
command and then debug what you need.
This works on my home routers IOS 12.0 on Cisco 3000 but not on these 17
g lines of
this type.
Steve Wilson
Network Engineer
-Original Message-
From: James Gosnold [mailto:[EMAIL PROTECTED]
Sent: 04 April 2003 09:22
To: [EMAIL PROTECTED]
Subject: RE: Debug display to VTY [7:66762]
Hi, this seemed to do the trick, thanks.
Just found it confusing as having gone t
James Gosnold wrote:
>
> Hi, this seemed to do the trick, thanks.
What worked? You got lots of suggestions.
If you press the Quote button first, then your message will include the
message that you are responding to, so we can see it.
I'm frustrated every time I try to look at debug messages whe
Hi Priscilla,
Yes you are quite right, good to finish off these threads by confirming what
the solution to my problem actually was!
It was the 'logging monitor debug' global config command that made the debug
output start coming through to my telnet session.
Still don't really understand why as
10 matches
Mail list logo
