Hello,
This might be a simple/rehashed question. I appreciate
any feedback from anyone who can comment on this..
If you were to order a higher guaranteed rate /port
speed on an existing frame-relay connection, for
example a t1 frame-relay, will there be any
configurations needed on the router or
You need to config the CSU/DSU or service-mod to utilize the correct number
of channels on the port, regardless of CIR. ELMI or traffic-shaping is used
to shape CIR speed.
SO if you orderd a full T1, but only had a 64K circuit (I hope you are using
the other channels for voice or something) you
~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~
-Original Message-
From: James [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 09, 2002 9:55 AM
To: [EMAIL PROTECTED]
Subject: Frame-Relay Question [7:31395]
Hello
No. The CSU still runs with the T-1 configuration.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
James
Sent: Wednesday, January 09, 2002 9:55 AM
To: [EMAIL PROTECTED]
Subject: Frame-Relay Question [7:31395]
Hello,
This might be a simple/rehashed
Only if you adding channels to a frac T1 but nothing for a CIR change.
Dave
James wrote:
Hello,
This might be a simple/rehashed question. I appreciate
any feedback from anyone who can comment on this..
If you were to order a higher guaranteed rate /port
speed on an existing
]
Subject: Re: Frame-Relay Question [7:31395]
Only if you adding channels to a frac T1 but nothing for a CIR change.
Dave
James wrote:
Hello,
This might be a simple/rehashed question. I appreciate
any feedback from anyone who can comment on this..
If you were to order a higher guaranteed rate
~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~
-Original Message-
From: James [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 09, 2002 9:55 AM
To: [EMAIL PROTECTED]
Subject: Frame-Relay Question [7:31395]
Hello
7 matches
Mail list logo