Re: [Re: How to verify the CIR from my router?]

Nooo. To find CIR through Bandwith statement is not a right criteria becausee if we are using IGRP/EIGRP , we need to play with Bandwidth statement to select primary and secondary routes so we might need to change them different as Actual CIR,.. True, but "show frame map" IS the actual

How to verify the CIR from my router?

All, Just want to ask how I could verfify/display the CIR of my PVC? I know we could throw traffic to verify this, but I just got a new PVC on a production router(we just add a new PVC on our production T1), so I can not push traffic to the production router just to verify the PVC. Is there

Re: How to verify the CIR from my router?

I believe that encap frame-relay cisco will display CIR from the cloud switch, other encaps will not. ""Jack Walker"" [EMAIL PROTECTED] wrote in message 8ucb78$kpr$[EMAIL PROTECTED]">news:8ucb78$kpr$[EMAIL PROTECTED]... All, Just want to ask how I could verfify/display the CIR of my PVC? I

Re: How to verify the CIR from my router?

Jeff, I am not user taffic shaping, so I am not sure which command can help me here, I do have cisco encap, but I tried all those show frame ? commands, no luck. Thanks Jack -- ""Jeff McCoy"" [EMAIL PROTECTED] wrote in message 8ucblc$msb$[EMAIL PROTECTED]">news:8ucblc$msb$[EMAIL

RE: How to verify the CIR from my router?

Title: RE: How to verify the CIR from my router? Try debug frame-relay lmi and wait for the full status enquiry (takes place every 6 updates, or 60 seconds, by default). If the switch is providing the CIR information in its updates, this is where you'll see it. - Don -Original Message

RE: How to verify the CIR from my router?

: How to verify the CIR from my router? Jeff, I am not user taffic shaping, so I am not sure which command can help me here, I do have cisco encap, but I tried all those show frame ? commands, no luck. Thanks Jack -- ""Jeff McCoy"" [EMAIL PROTECTED] wrote in message 8ucblc$

RE: How to verify the CIR from my router?

"show frame-relay map" should show you the CIR. Feargal -Original Message- From: Jack Walker [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 08, 2000 12:35 PM To: [EMAIL PROTECTED] Subject: Re: How to verify the CIR from my router? Jeff, I am not user taffic shapin

Re: How to verify the CIR from my router?

Try a 'debug frame-relay lmi'. Keith _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: How to verify the CIR from my router?

PROTECTED] Subject: Re: How to verify the CIR from my router? Jeff, I am not user taffic shaping, so I am not sure which command can help me here, I do have cisco encap, but I tried all those show frame ? commands, no luck. Thanks Jack -- ""Jeff McCoy"" [EMAI

Re: How to verify the CIR from my router?

CTED] To: [EMAIL PROTECTED] cc:(bcc: JENNY MCLEOD/NSO/CSDA) Subject: Re: How to verify the CIR from my router? Jeff, I am not user taffic shaping, so I am not sure which command can help me here, I do have cisco encap, but I tried all those show frame ? commands, no luck. Thanks Ja

RE: How to verify the CIR from my router?

'; [EMAIL PROTECTED] Subject: RE: How to verify the CIR from my router? show frame-relay map should show you the CIR. I will paste the output of one of my routers: Router-R1#sh fra map Serial0.1 (up): point-to-point dlci, dlci 500(0x1F4,0x7C40), broadcast, BW = 256000 status defined, active

Re: How to verify the CIR from my router?

] Date: Wednesday, November 08, 2000 5:09 PM Subject: RE: How to verify the CIR from my router? show frame-relay map should show you the CIR. I will paste the output of one of my routers: Router-R1#sh fra map Serial0.1 (up): point-to-point dlci, dlci 500(0x1F4,0x7C40), broadcast, BW = 256000

Re: How to verify the CIR from my router?

Well is this BW statement based on the bandwith statement entered in the config for a routing protocol to use? I dont think this command will give you the acutal CIR of the circuit. I maybe wrong...let me know. The BW statement in the "show frame-relay map" command represents the CIR as

[Re: How to verify the CIR from my router?]

Nooo. To find CIR through Bandwith statement is not a right criteria becausee if we are using IGRP/EIGRP , we need to play with Bandwidth statement to select primary and secondary routes so we might need to change them different as Actual CIR,.. IF we are using ATM links, we could surely

[Re: How to verify the CIR from my router?]

Nooo. To find CIR through Bandwith statement is not a right criteria becausee if we are using IGRP/EIGRP , we need to play with Bandwidth statement to select primary and secondary routes so we might need to change them different as Actual CIR,.. IF we are using ATM links, we could surely