Hope this helps. You don't have any spids configured on either end. It's
weird because you have multi frame est. try putting those in. Also instead
of dialer string put in a dialer map. They are supposed to work the same,
but I have seen in the past where one works and the other doesn't. I w
A couple of things come to mind:
a) I would like to see the show int bri0:1 to see if the B channnel came up.
b) I do not see a dialer map statement, without it the packet will not know
where to go.
c) I had a similar problem with encapsulation failed on the packet debugs.
The Bri0:1 B channel wa
Dialer string is for use on dialer interfaces because for whatever reason
you cannot use a dialer map (not sure why). If you use physical interfaces
like BRI's or Async's, you typically use the dialer map, but since these are
also "dialer" interfaces, you can use the dialer string as well. With
Can you explain what you mean by being able to use either ?
Thanks
""Danny Andaluz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> You should be able to use either one.
> ""John Smith"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Some one correct me If I
You should be able to use either one.
""John Smith"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Some one correct me If I am wrong but I think you need a dialer-map
> statement
> ""Mike Sweeney"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hey Abbas-
>
Some one correct me If I am wrong but I think you need a dialer-map
statement
""Mike Sweeney"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hey Abbas-
>
> Check your switch type with the carrier.. my guess is that it's
incorrectly
> set.
>
> :::snip::
> Cause i = 0x82EF - Prot
Hey Abbas-
Check your switch type with the carrier.. my guess is that it's incorrectly
set.
:::snip::
Cause i = 0x82EF - Protocol error; unspecified.
::snip::
MikeS
www.packetattack.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39356&t=39342
-
In simplest ISDN configuration I should be able to ping, but unfortunetly I
can't. This week is very tough nothing seems to work I guess.
I have two routers connected through ISDN. Here is the config. I should be
able to ping, but can't ping the local and the remote interface.
Any Clue.
R
8 matches
Mail list logo