Group, wondering if you can help me with a problem I am having with my
configuration. When calls are made inbound, I receive a busy signal. When
calls are made outbound, I get a fast dial tone. I checked with the CO and
they have said it's not the switch. I made a coupld of changes to the spid
Hi all !!,
I have a dialer with two dialer string defined:
int dial 1
dialer string 914401000
dialer string 914400507
...
The question is, what these messages mean??
6d02h: ISDN BR1/1: TX ->
I am working for an ISP, few of our customers who have subscribed for PSTN
account, dials into ISDN No. how can I stop them from using ISDN no.
without affecting ISDN users...
Tapas Das
Get Your Private, Free E-mail
Hi all
Thank you for your help on the speed of the ISDN
connection. Most helpfull.
I'm afraid that my woes continue - the link is
working fine, authenticated, can reach anything I want to, resolve to the DNS
servers at the ISP, use the ISP's proxy but occasionally for a few minutes the
w
check the default gateway on your workstations. make sure they are set to
the router's e0
-Brad
""BIKEMAN"" <[EMAIL PROTECTED]> wrote in message
004101bfcea6$8d75bde0$de53fea9@WIN98MAIN">news:004101bfcea6$8d75bde0$de53fea9@WIN98MAIN...
Hi all
Thank you for your help on the speed of the ISDN con
Ellis" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2000 2:23 PM
Subject: Re: ISDN problems
> check the default gateway on your workstations. make sure they are set to
> the router's e0
>
> -Brad
> "
I have a 3620 that has a problem with timing out. I have set the dialer
idle-timoue to 180 seconds--the router will keep the interface open for 180
seconds and then drop it for 9 seconds. I set it to 55 seconds and it did
the same timeout after 55 seconds--9 second drop. This only seems to happen
Hello group,
I'm having a little trouble with my ISDN config.
Now, this is what I'm getting after a single ping. It looks like it's
telling me "Mandatory IE missing".
Could someone please take a look.
Thanks
Albert
!
interface BRI0
ip address 196.1.1.1 255.255.255.0
no ip directed-broadcas
]
Subject: ISDN problems... [7:34324]
I have a 3620 that has a problem with timing out. I have set the dialer
idle-timoue to 180 seconds--the router will keep the interface open for 180
seconds and then drop it for 9 seconds. I set it to 55 seconds and it did
the same timeout after 55 seconds--9
[mailto:[EMAIL PROTECTED]]
Gesendet am: Monday, February 04, 2002 3:53 PM
An: [EMAIL PROTECTED]
Betreff: RE: ISDN problems... [7:34324]
If the router is not seeing interesting traffic within your idle period then
it should drop the line. What is in your dialer-list to define what is
interesting
[EMAIL PROTECTED]]
> Gesendet am: Monday, February 04, 2002 3:53 PM
> An: [EMAIL PROTECTED]
> Betreff: RE: ISDN problems... [7:34324]
>
> If the router is not seeing interesting traffic within your idle period
then
> it should drop the line. What is in your dialer-list to define wha
Subject: ISDN Problems [7:15236]
Hello group,
I'm having a little trouble with my ISDN config.
Now, this is what I'm getting after a single ping. It looks like it's
telling me "Mandatory IE missing".
Could someone please take a look.
Thanks
Albert
!
int
Albert,
This is an excerpt from the CCO on ISDN troubleshooting issues. It is
apparently n issue with your provider's ISDN switch.
HTH,
Rob H. CCNP, CCDP, CCIE Written, MCSE, CCA
Because the router includes the Channel ID Information Element (DE) in the
ALERTING and the CONNECT messages,
This is usually due to a D-channel error. If this error occurs
systematically, report it to your ISDN service provider
- Original Message -
From: "Paul"
To:
Sent: Wednesday, August 08, 2001 3:38 PM
Subject: Re: ISDN Problems [7:15236]
> Check your switch type is right.
Hi,
Enclosed ISDN CALL HISTORY of showing customers' connect time.
It it disconnects within few seconds. I am 100% sure that there is no ISDN
problem at either end.
Sometimes the connect time ranges from 5 minutes to 30 minutes.
This problem happens daily.
Also enclosed the error log for the
me again on isdn issues.
have resolved previous problems thanks for all input.
another ugly snake has reared it's neck..
have a number of isdn sites dialing in (dialer interfaces and not ddr) and
being disconnected on random timeouts. they idle timeout is set to 120
seconds.. somtimes they discon
Router(config)#access-list access-list-number [permit | deny] {protocol |
protocol-keyword}{source source-wildcard | any}{destination
destination-wildcard | any}[protocol-specific-options] [log]
The more complex form of the command references an access list, allowing
finer control of the definit
If your idle timeout is 120 sec and you have interesting traffic defined
with the dialer-list 1 protocol ip permit command
then I would start check for bugs in my IOS. As long as some interest
traffic is going over the link (ie. routing protocol, user traffic, etc)
something has to reset the timers
taken a snapshot of some of the config...
**
interface Dialer1
description ISDN Dial In Users
ip unnumbered Loopback0
no ip directed-broadcast
encapsulation ppp
no ip route-cache
ip ospf interface-retry 0
no ip mroute-cache
dialer remote-name rushta01
dialer poo
Is there anyone out there using a Teltone Demonstrator that could give me
some assistance offline? I can't seem to get my ISDN to work.
-- Leigh Anne
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21681&t=21681
--
FAQ, list
Leigh Anne Chisholm
> Sent: Tuesday, October 02, 2001 9:40 AM
> To: [EMAIL PROTECTED]
> Subject: ISDN Problems - Teltone information required [7:21681]
>
>
> Is there anyone out there using a Teltone Demonstrator that could give me
> some assistance offline? I can't seem
Hi all,
Have faced some weird problems when working with 4 port BRI module in 3662
router. The 3662 router has 12.1(5)T10 IP Plus IOS.
Some of the problems faced are as under :
The "dialer idle-timeout" on dialer interfaces does not work. The
connections (ppp multilink bundle) are disconnected
Use 12.1(5)T9. 12.1(5)T10 has tons of IOS issues.
""Rick Foster"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> Have faced some weird problems when working with 4 port BRI module in 3662
> router. The 3662 router has 12.1(5)T10 IP Plus IOS.
>
> Some of the problems
I see more complaints / problems / issues with ISDN and DDR in specific and
in general, in real world and in test situations.
Idle curiousity. Is ISDN really viable in terms of reliability for DDR
applications?
In any number of mission critical applications, I have seen major vendors,
major ente
FWIW I have implemented more ISDN backup than I care to remember but
once configured and tested it works well. I always suggest that
customers periodically test the backup, at least force tha ISDN
connection up by pinging a test loopback or something. I had one
customer who did't want to loose t
25 matches
Mail list logo
