Hi folks,
Does anybody have experience with using ISL en 802.1q within the same
switch. I have ISL trunk between my access and distribution layer. Now I
want to connect a firewall on my access switch with 802.1q trunking
protocol. Is it possible? if the answer is YES, should I change anything in
m
most newer cisco switches can use an ISL and a DOT1Q trunk actively
I believe I did that the other day with a 3550 and a 3524xl
Larry
[EMAIL PROTECTED] wrote:
>Hi folks,
>
>Does anybody have experience with using ISL en 802.1q within the same
>switch. I have ISL trunk between my access a
protocols on the ports and you are away!
Regards
Alan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
[EMAIL PROTECTED]
Sent: 19 December 2002 10:10
To: [EMAIL PROTECTED]
Subject: ISL & 802.1q in one switch [7:59512]
Hi folks,
Does anybody
you will need to check your hardware and
software...
Mark
---Original Message---
From: "[EMAIL PROTECTED]"
Sent: 12/19/02 04:09 AM
To: [EMAIL PROTECTED]
Subject: ISL & 802.1q in one switch [7:59512]
>
> Hi folks,
Does anybody have experience with using ISL en 80
: [EMAIL PROTECTED]
Subject: Re: ISL & 802.1q in one switch [7:59512]
Yes, it is possible... It is dependant upon the type of switch you are
using... If it is a 3550, 2950, 4000, etc... You would do
switchport mode trunk
switchport trunk encapsulation (dot1q or isl)
This is off the top of my head
; Mark
> ---Original Message---
> From: "[EMAIL PROTECTED]"
> Sent: 12/19/02 04:09 AM
> To: [EMAIL PROTECTED]
> Subject: ISL & 802.1q in one switch [7:59512]
>
> >
> > Hi folks,
>
> Does anybody have experience with using ISL en 802.1q with
6 matches
Mail list logo
