PROTECTED]
Subject: Re: Lightstream PVC config problem... [7:49352]
Try using VPI 1 instead of 0. I know 0 is a valid option but I have
seen it not work and we don't use it for other reasons that I don't know
the history of. Also the framing and scrambling parameters are needed
if I recall
Edward,
I had the same exact issue from the same exact book, I am working with a
LS1010 ASP in a 5500 switch (pretty much the same as your setup). The
previous post was correct in saying that you only have to enter the PVC on
one of the interfaces, do a show atm vc (I think that's right) and
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
THANKS!
Eddie
-Original Message-
From: Andre Riscalla [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 21, 2002 2:36 PM
To: Edward Sohn
Cc: [EMAIL PROTECTED]
Subject: Re: Lightstream PVC config problem... [7:49352]
Edward
Hey Andre,
Thanks for your help thus far...Yes, all the
interfaces say up/up. I have changed the router
versions to 3.1 as you suggested. I still have no ip
connectivity. Any other suggestions?
The routers/l1010 both have very up-to-date software,
as shown below from my sho ver.
Thanks,
Try using VPI 1 instead of 0. I know 0 is a valid option but I have
seen it not work and we don't use it for other reasons that I don't know
the history of. Also the framing and scrambling parameters are needed
if I recall.
Here is a config I know works cause I was using it in the lab:
!
end
THANKS!
Eddie
-Original Message-
From: Andre Riscalla [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 21, 2002 2:36 PM
To: Edward Sohn
Cc: [EMAIL PROTECTED]
Subject: Re: Lightstream PVC config problem... [7:49352]
Edward,
You are simply trying to define the
aux 0
line vty 0 4
!
!
end
THANKS!
Eddie
-Original Message-
From: Andre Riscalla [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 21, 2002 2:36 PM
To: Edward Sohn
Cc: [EMAIL PROTECTED]
Subject: Re: Lightstream PVC config problem... [7:49352]
Edward,
You are simply trying to define
peer cor custom
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
THANKS!
Eddie
-Original Message-
From: Andre Riscalla [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 21, 2002 2:36 PM
To: Edward Sohn
Cc: [EMAIL PROTECTED]
Subject: Re: Lightstream PVC config problem...
8 matches
Mail list logo