Has anyone had any experience w/the following combination?
3640 & NM-1HSSI & Kentrox DataSMART T3/E3 IDSU
I've been trying, to no avail, to bring the HSSI up for a 12M DS3 The
CSU/DSU, according to the lights, is ready to send and receive data; but
when I bring up the int on the router, it s
Don't you need clock on serials?
/Nadeem
Jablonski, Michael wrote:
>Has anyone had any experience w/the following combination?
>
>3640 & NM-1HSSI & Kentrox DataSMART T3/E3 IDSU
>
>I've been trying, to no avail, to bring the HSSI up for a 12M DS3 The
>CSU/DSU, according to the lights, is rea
What does the physical layer say?
sh controller (intf)
Martijn
-Oorspronkelijk bericht-
Van: Jablonski, Michael [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 29 juli 2003 0:24
Aan: [EMAIL PROTECTED]
Onderwerp: NM-1HSSI w/kentrox DataSMART T3/E3 [7:73129]
Has anyone had any experience
FWIW, here is a current working config, 3640 to a Kentrox. If you
have the cable connected and the CSU powered you should get an up/down
state.
interface Hssi3/0
description to Qwest x
ip address x.x.x.x 255.255.255.252
encapsulation ppp
load-interval 30
serial restart-delay 0
Mike,
I'd try replacing the cable first if you have one available. Even if the DS3
isn't configured correctly your interface should be up if you're router is
speaking to your IDSU. I'd also try resetting the IDSU to its defaults just
to make sure something in the config on the IDSU isn't breaking
PROTECTED]
Subject: Re: NM-1HSSI w/kentrox DataSMART T3/E3 [7:73129]
Mike,
I'd try replacing the cable first if you have one available. Even if the DS3
isn't configured correctly your interface should be up if you're router is
speaking to your IDSU. I'd also try resetting the
Jablonski, Michael wrote:
>
> Has anyone had any experience w/the following combination?
>
> 3640 & NM-1HSSI & Kentrox DataSMART T3/E3 IDSU
>
> I've been trying, to no avail, to bring the HSSI up for a 12M
> DS3 The
> CSU/DSU, according to the lights, is ready to send and receive
> data; bu
ECTED]
Subject: RE: NM-1HSSI w/kentrox DataSMART T3/E3 [7:73129]
Jablonski, Michael wrote:
>
> Has anyone had any experience w/the following combination?
>
> 3640 & NM-1HSSI & Kentrox DataSMART T3/E3 IDSU
>
> I've been trying, to no avail, to bring the HSSI up fo
2003 8:56 AM
To: [EMAIL PROTECTED]
Subject: RE: NM-1HSSI w/kentrox DataSMART T3/E3 [7:73129]
Yeah it's a HSSI cable... CAB-HSI1 is the part. Telco is using the default
HDLC for encapsulation.
I've got telco coming out today to test the line. According to Kentrox's
doc, a T3 w/H
Levering
*070 - 44 12285
* [EMAIL PROTECTED]
-Oorspronkelijk bericht-
Van: Jablonski, Michael [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 29 juli 2003 0:24
Aan: [EMAIL PROTECTED]
Onderwerp: NM-1HSSI w/kentrox DataSMART T3/E3 [7:73129]
Has anyone had any experience w/the following
10 matches
Mail list logo