Hi all,
I am trying to dial ISP by using modem analog in cisco 805 (connected to
serial port). I already use Fast step and Config maker but yield no result.
I only able to dial in, the modem get disconnected a few minutes after
dialin established. I put some debugging message below in case anybody
Try this it works on 1600 . I think is better to send us
the config that you are using.
Cristian
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname C1600
!
enable secret 5 //
enable password ??
!
chat-script dial ABORT
cisco805#
01:51:36: Serial0 DDR: rotor dialout [priority]
01:51:36: Serial0 DDR: Dialing cause ip (s=192.168.2.1, d=202.148.11.40)
01:51:36: Serial0 DDR: Attempting to dial 21,5550019
01:51:36: CHAT1: Attempting async line dialer script
01:51:36: CHAT1: Dialing using Modem script: dial & System s
This is the config I figure by using fast step software combined with CLI
from cisco homepage. I might do some testing tommorow.
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname cisco805
!
logging buffered 10240 debug
h the password
set in the opposite router's corresponding username definition.
Dal
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Indy
Sent: Friday, March 16, 2001 4:07 AM
To: [EMAIL PROTECTED]
Subject: Re: Need help configuring DDR on 805
This is the conf
e password is also case sensitive and must match the password
> set in the opposite router's corresponding username definition.
>
> Dal
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Indy
> Sent: Friday, March 16, 2001 4
6 matches
Mail list logo