: ElephantChild [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 31, 2000 8:14 PM
To: Joe Martin
Cc: [EMAIL PROTECTED]
Subject: Re: PLS HELP - DLSW+ not working, token-ring attached FEP 3746
to a ethernet attached SNA client over Frame-relay...
On Wed, 31 May 2000, Joe Martin wrote:
After writing
TECTED]]
Sent: Tuesday, May 30, 2000 5:15 AM
To: [EMAIL PROTECTED]
Subject: Re: PLS HELP - DLSW+ not working, token-ring attached FEP 3746
to
a ethernet attached SNA client over Frame-relay...
MAC addresses are carried in non-canonical format in DLSW. If your
running
a protocol converter on th
Hi gurus, i have this problem getting a token-ring attached FEP 3746
talking to a Ethernet attached SNA client over a back-to-back frame-relay
network configured for DLSW+. I followed the instructions and guidelines
provided on the cisco DLSW+ docs, however, i fails to get the configuration
Mohan ,
The problem is right here ;
04:38:03: DLSw: CONN: peer 150.150.1.1 open failed,
unreachable [17]
This is one (possible) reason why dlsw is not working
.
Try to do an extended ping between the dlsw peers .
If you get this working the dlsw peers will come in a
connect state .
On the
PROTECTED]]
Sent: 29 May 2000 11:47
To: '[EMAIL PROTECTED]'
Subject: PLS HELP - DLSW+ not working, token-ring attached FEP 3746 to a
ethernet attached SNA client over Frame-relay...
Hi gurus, i have this problem getting a token-ring attached FEP 3746
talking to a Ethernet attached SNA client o
MAC addresses are carried in non-canonical format in DLSW. If your running
a protocol converter on the Ethernet segment and have created a peer mac
address, make sure you do the conversion. This is also true of any peer
statements you have in the routers.
I did an install like this about 3
Joe ,
Dlsw peers are active peers . They need to be in a
connect state . Debugs shows that they cannot connect
.
( 100% sure this is a routing issue )
Don't think you are correct in your response ;
Mac addresses are kept in the dlsw reachability in a
non-cannonical format . This means that you
Flem [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, May 30, 2000 6:23 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: PLS HELP - DLSW+ not working, token-ring attached FEP 3746 to
a ethernet attached SNA client over Frame-relay...
Joe ,
Dlsw peers are active peers .
8 matches
Mail list logo
