One caveat is that your current version will probably not support it.
That's probably why you are flashing it. Here's the link.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/relnote/fprn
/10085_fp.htm
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
You probably were told it couldnt be done. I know I couldn't do it because
the IOS was too old but here's something I pulled off of Cisco's site.
The following example shows how to use the copy xmodem flash command on a
Cisco 2500 series router:
Router# copy xmodem flash
Look here (watch for wordwrap)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/1cb
ook/1csysim.htm
Setup a TFTP server on a computer, and write down it's IP address.
To save IOS to the TFTP server, type: copy flash tftp
To load IOS from the TFTP server, type: copy tftp
anuary 17, 2001 10:55 PM
Subject: Re: 2500 xmodem flash transfer
> Are you sure this will work ??? I know the 2500 & the 4000's ROM's do not
> allow for this...
>
> Phil
> - Original Message -
> From: "william yuwono" <[EMAIL PROTECTED]>
illiam yuwono"
<[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, January 18, 2001 11:31 AM
Subject: Re: 2500 xmodem flash transfer
> Is there no way to up/download IOS images in 2500 without transceivers?
I'm
> trying to up/download images and have had no
ailto:[EMAIL PROTECTED]]On Behalf Of
Circusnuts
Sent: Thursday, January 18, 2001 6:55 AM
To: william yuwono; Albert Lu
Cc: [EMAIL PROTECTED]
Subject: Re: 2500 xmodem flash transfer
Are you sure this will work ??? I know the 2500 & the 4000's ROM's do not
allow for this...
Phil
---
wono <[EMAIL PROTECTED]>; Albert Lu
<[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
> Subject: Re: 2500 xmodem flash transfer
> Date: Thursday, January 18, 2001 5:55 PM
>
> Are you sure this will work ??? I know the 2500 & the 4000's ROM's do
not
> allow for this..
Are you sure this will work ??? I know the 2500 & the 4000's ROM's do not
allow for this...
Phil
- Original Message -
From: "william yuwono" <[EMAIL PROTECTED]>
To: "Albert Lu" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursda
If you a using xmodem command, you can follow the step like below:
1. Change console speed of router to the highest speed its supported.
2. After changes the speed, changes your hyperterm speed
to the console's speed.
3. type xmodem -c at the rommon promt of router.
4. clik transfer> sen
9 matches
Mail list logo
