Hi David,
The vlaues start at Zero. See below..
>From Cisco Error Decoder:
%SYS-3-SYS_LCPERR3:Module [dec]: Coil [dec] Port [dec] stuck [dec]
times([dec] due to lcol; [dec] due to notx)
This message indicates that the module has detected a problem with the port
ASIC. The module has dete
Dave,
Blade 3 is bad. Open a TAC case, if you have support, and get the blade
replaced.
Jim
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 3:49 PM
To: [EMAIL PROTECTED]
Subject: 6500 10/100 line card COIL numbering [7:73194]
Hi,
I have a cust
If I am not mistaken... port 3/19 is your culprit..
-Sal
Walker, James - Is wrote:
>
> Dave,
>
> Blade 3 is bad. Open a TAC case, if you have support, and get
> the blade
> replaced.
>
> Jim
>
> -Original Message-
> From: MADMAN [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, July 29, 200
That has already been done. After changing out the module we started
seeing this same error on a port in mod 7 also! It is probably a sup
card that is the problem.
Thanks
BTW Thanks for those that responded, the Coil does start with 0!!
Dave
Walker, James - Is wrote:
> Dave,
>
> B
4 matches
Mail list logo