The only thing I see in the config is the two static routes on each side.
Both point to the remote network, but their next hops are different. I'd
recommend getting rid of one of them on both side. Do a "show ip route", I
bet it is only showing the static to the Dialer. It's probably not causin
One of the first things I noticed in the config section under Interface
BRI0, you have
interface BRI0
bandwidth 64
Replace 64 with 64000?
Bob Schussler
Sales Engineer
Broadwing / Indianapolis
317-469-3719
-Original Message-
From: Muhammad Faheem [mailto:[EMAIL PROTECTED]]
Sent:
Muhammed
the 48% success is very noticable, it's almost 50-50, this is usually a
routing table problem, by checking the route table, you can find something
like this:
router1#show ip route
S20.0.0.0/8 is directly connected
is directly connected, Dialer0
C10.0.0.0/8 is dire
Only you have to put one ip route.
delete ip route ip route 20.0.0.0 255.0.0.0 Dialer0
"Muhammad Faheem" <[EMAIL PROTECTED]> wrote in message
F10CA2BAB231D211979A00805FC7A31A017A1F71@AFCOMP02">news:F10CA2BAB231D211979A00805FC7A31A017A1F71@AFCOMP02...
> Hi All
>
> I have connected 2 cisco 801 ISD
packets are being forwarded
to it.
JMcL
-- Forwarded by Jenny Mcleod/NSO/CSDA on 12/07/2000 18:49
---
[EMAIL PROTECTED] on 12/07/2000 05:18:06
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc: (bcc: JENNY MCLEOD/NSO/CSDA)
Subject:
AIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 11, 2000 21:18
Subject: RE: 801 ISDN ping reply only 48%
> One of the first things I noticed in the config section under Interface
> BRI0, you have
>
> interface BRI0
> bandwidth 64
>
> Replace 64 with 64000?
&
I would doubt the circuit itself first.
Kent
--- Muhammad Faheem <[EMAIL PROTECTED]> wrote:
> Hi All
>
> I have connected 2 cisco 801 ISDN routers using 64k
> link , but when i ping
> from SITE A to SITE B or viseversa
> it replies
>
>
!.!.!.!..!.!.!.!..!.!.!.!.!..!.!.!.!.!.!.!.!.!.!..!..!.!
7 matches
Mail list logo