Drop a loop back cable in both routers and see if you get a link light
and just test to see if the routers are working and then check!
1. Time slots
2. Encapsulation
3. Cables (yeah i know silly it may sound)
4. Number of channels configured for, 24 channels is a full T1
(64/channel)
5. b8zs, es
Why don't you send us copies of your config from both sides. It is hard to
troubleshoot without any info.
Moshe
> -Original Message-
> From: Mark [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, June 13, 2000 12:20 PM
> To: [EMAIL PROTECTED]
> Subject: Cisco 2611 T1/CSU/DSU Module
>
>
> Hey
I just did this procedure last week with a 2620 w/T1 module connecting to a
Kentrox CSU/DSU on the other end. Here's the doc that helped me.
http://www.cisco.com/warp/public/471/52.html
In my instance, I had to pay particular attention to data-coding, timeslots,
and linecode.
Hope that helps,
F
Try this.
controller T1 0
framing esf
linecode b8zs
channel-group 1 timeslots 1-24 speed 64
loop-detect
Darrin Gibson
Darrin Gibson
AL-ARNG WO1
Network Manager DCSIM
MCSE, MCP+I
(334)213-7551, (DSN)363-7551
-Original Message-
From: Mark [mailto:[EMAIL PROTECTED]]
Sent: Tuesd
What IOS are you running? I have run into the scenario, when using 2600s, that a
certain version of 11.3, would not accept the T1 WIC. I know that it is supposed
to! I ended up having to upgrade the code.
Si
Mark wrote:
> Hey we have a T1 CSU/DSU module connected to a dedicated T1 line. We ar
The service-module t1 timeslots is the number of channels that you have on
the T1
You can leave off the frame-relay lmi-type. Cisco will autodetect (v11.3 or
higher)
It is a good idea to set up sub-interfaces in the event you have multiple
PVC's in the future
interface Serial0/0
description Circ
6 matches
Mail list logo
