Re: ISDN Problem [7:39342]

2002-03-27 Thread Danny Andaluz
Hope this helps. You don't have any spids configured on either end. It's weird because you have multi frame est. try putting those in. Also instead of dialer string put in a dialer map. They are supposed to work the same, but I have seen in the past where one works and the other doesn't. I w

RE: ISDN Problem [7:39342]

2002-03-25 Thread Michael Witte
A couple of things come to mind: a) I would like to see the show int bri0:1 to see if the B channnel came up. b) I do not see a dialer map statement, without it the packet will not know where to go. c) I had a similar problem with encapsulation failed on the packet debugs. The Bri0:1 B channel wa

Re: ISDN Problem [7:39342]

2002-03-24 Thread Danny Andaluz
Dialer string is for use on dialer interfaces because for whatever reason you cannot use a dialer map (not sure why). If you use physical interfaces like BRI's or Async's, you typically use the dialer map, but since these are also "dialer" interfaces, you can use the dialer string as well. With

Re: ISDN Problem [7:39342]

2002-03-24 Thread cybertek
Can you explain what you mean by being able to use either ? Thanks ""Danny Andaluz"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > You should be able to use either one. > ""John Smith"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Some one correct me If I

Re: ISDN Problem [7:39342]

2002-03-24 Thread Danny Andaluz
You should be able to use either one. ""John Smith"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Some one correct me If I am wrong but I think you need a dialer-map > statement > ""Mike Sweeney"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hey Abbas- >

Re: ISDN Problem [7:39342]

2002-03-24 Thread John Smith
Some one correct me If I am wrong but I think you need a dialer-map statement ""Mike Sweeney"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hey Abbas- > > Check your switch type with the carrier.. my guess is that it's incorrectly > set. > > :::snip:: > Cause i = 0x82EF - Prot

RE: ISDN Problem [7:39342]

2002-03-24 Thread Mike Sweeney
Hey Abbas- Check your switch type with the carrier.. my guess is that it's incorrectly set. :::snip:: Cause i = 0x82EF - Protocol error; unspecified. ::snip:: MikeS www.packetattack.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39356&t=39342 -