Re: % Connection refused by remote host

Not knowing much about your firewall - is the async port available? i.e. - does another process have the async open? If the port is disabled or "occupied" by another program it won't be available to the terminal server. Just like the router console port. If you reverse telnet into it, then give

Re: % Connection refused by remote host

Most likely the issue is with the config on the terminal server. Take a look at the line with "show line" and see if there is a * next to the line you have plugged into the firewall. If there is try clearing the line "clear line _" then show the line again. If this fixes it, but the issue keeps

Re: % Connection refused by remote host

lt;[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, February 19, 2001 10:29 AM Subject: Re: % Connection refused by remote host > Most likely the issue is with the config on the terminal server. Take a look > at the line with "show line" and see

Re: % Connection refused by remote host

Make sure 'transport input all' is set on the line you're trying to reverse-telnet into. Paul <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > I'm playing with 2511 terminal server and plugged a router and a firewall on > the async ports. But when I try

Re: % Connection refused by remote host

I use a terminal server daily to do configuration on our bank of lab routers.   I typically see that error when I try to connect to a router when a previous session is still active.   If you're connecting to the console port only one connection can be "alive" at one time.   Unlike multiple te

Re: Connection refused by remote host [7:31360]

I have this happened to me on the 2511. All I need to do was add no exec and modem host to the term server. If you connect to a 2924xl switch, the reverse telnet would not work with the modem host command. Check this out. http://www.cisco.com/warp/public/793/access_dial/comm_server.html >From

Re: Connection refused by remote host [7:31360]

Set the privelege level for the clear line command of course no exec also helps ""Edward Chuchaisri"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Guys, > > I have an old terminal server CS-500 and I constantly get the Connection > refused by remote host error message

Re: Connection refused by remote host [7:31360]

But the problem is that I don't think 500-CS allows you to set the privelege level. It runs on IOS 9.21. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31415&t=31360 -- FAQ, list archives, and subscription info: http://www.groups