I am dialing into a 2600 router using Hyperterminal. I need to see the
router messages on the Hyperterm screen and have issued "Terminal
Monitor" successfully. However, it is not working. I have another 2600
that displays the messages just fine. Any ideas what might be the
problem. Both route
You have to turn on the appropriate debugging commands, i.e. debug ip
routing or whatever you're wanting to see.
Dave
-Original Message-
From: Eric Hauptman [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 04, 2000 1:18 AM
To: [EMAIL PROTECTED]
Subject: Terminal Monitor problem
g and
must be process switched.
You can disable fast switching with
no ip route-cahce ?? I think that is it. There may be others.
-Original Message-
From: Eric Hauptman [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 04, 2000 1:18 AM
To: [EMAIL PROTECTED]
Subject: Terminal Monitor proble
arning conditions(severity=4)
-Original Message-
From: Eric Hauptman [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 04, 2000 1:18 AM
To: [EMAIL PROTECTED]
Subject: Terminal Monitor problem
I am dialing into a 2600 router using Hyperterminal. I need to see the
router messa
g and
must be process switched.
You can disable fast switching with
no ip route-cahce ?? I think that is it. There may be others.
-Original Message-
From: Eric Hauptman [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 04, 2000 1:18 AM
To: [EMAIL PROTECTED]
Subject: Terminal Mo
Problem fixed. The command "logging synchronous" was enabled on line
console 0 and for some reason having this command enabled prevents output to
the terminal. Anyone know why this might be? Thanks.
Eric
Eric Hauptman wrote:
> I am dialing into a 2600 router using Hyperterminal. I need to s
6 matches
Mail list logo