I assume you have OS somewhere on this box. If the OS is on
bootflash, from the ROMMON prompt try boot bootflash:filename You
should be able to verify a files existance by doing a dir bootflash:
Dave
Ron wrote:
I have a new 6513 Catalyst switch and am getting the following when I boot
I have a new 6513 Catalyst switch and am getting the following when I boot
the device:
Autoboot: failed, BOOT string is empty
rommon 1
Can someone lead me in the right direction on what to do to get the boot
string set up properly?
Message Posted at:
Is there a slot card in the sup ?
If so , try to boot from slot0:
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Ron
Sent: Wednesday, June 25, 2003 3:55 PM
To: [EMAIL PROTECTED]
Subject: Boot problem with new 6513 [7
Ronnie
Ron wrote in message
news:[EMAIL PROTECTED]
I have a new 6513 Catalyst switch and am getting the following when I boot
the device:
Autoboot: failed, BOOT string is empty
rommon 1
Can someone lead me in the right direction on what to do to get the boot
string set up properly?
I am having a problem booting a 2600. Attached message
shows the messages it displays at boot up. Concerning
the hardware, I am sure the flash and memory are OK.
At least, they worked on another system.
Regards,
Ukairo
__
Do You Yahoo!?
Make a
: Boot problem on 2600 [7:23343]
I am having a problem booting a 2600. Attached message
shows the messages it displays at boot up. Concerning
the hardware, I am sure the flash and memory are OK.
At least, they worked on another system.
Regards,
Ukairo
ot code in the 2500 does effect the IOS. What is your Sho
Version
what IOS are you trying ???
Phil
- Original Message -
From: Fanglo MA
To:
Sent: Wednesday, May 30, 2001 10:54 PM
Subject: IOS boot problem [7:6555]
Hi,
I have a pair of 2502, r1 an
Hi,
I have a pair of 2502, r1 and r2, and when I upgrade r1's IOS I get r1
report checksum error. Since the upgrade must erase the old IOS in flash,
I'm then forced to boot in RXBOOT. After then I connect r1 back-to-back to
r2 and issue copy tftp flash to get the IOS from r2's flash. Both
The boot code in the 2500 does effect the IOS. What is your Sho Version
what IOS are you trying ???
Phil
- Original Message -
From: Fanglo MA
To:
Sent: Wednesday, May 30, 2001 10:54 PM
Subject: IOS boot problem [7:6555]
Hi,
I have a pair of 2502, r1 and r2, and when I upgrade
S. What is your Sho Version
what IOS are you trying ???
Phil
- Original Message -
From: Fanglo MA
To:
Sent: Wednesday, May 30, 2001 10:54 PM
Subject: IOS boot problem [7:6555]
Hi,
I have a pair of 2502, r1 and r2, and when I upgrade r1's IOS I get r1
report checksum erro
I've been reading from:
http://www-ks.rus.uni-stuttgart.de/KSBE/cisco/data/doc/hardware/access/2520/
ug/c2520trb.htm
and
http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1903.htm#xtocid178
1610
I have a 2520 router that when it boots the OK LED stays lit but the
console produces no
.
-Original Message-
From: info [mailto:[EMAIL PROTECTED]]
Sent: Saturday, January 13, 2001 2:03 PM
To: [EMAIL PROTECTED]
Subject: troubleshooting a 2520 boot problem
I've been reading from:
http://www-ks.rus.uni-stuttgart.de/KSBE/cisco/data/doc/hardwar
e/access/2520/
ug
MAIL PROTECTED]
Sent: Saturday, January 13, 2001 7:04 PM
Subject: RE: troubleshooting a 2520 boot problem
Can we assume that you have tried the same terminal software and console
cable on a working router?
Regarding power supplies. Sometimes the pins on the motherboard become
covered with a re
Has anyone ever seen this at the end of the boot sequence?
"Invalid percentage: valid values are:10, 15, 20, 25, 30, 40, 50"
I had some problems with that goofy software loader, and ended up having to
force a TFTP download, which them lead me to reset the BOOT= param in
ROMMON. Now I get
14 matches
Mail list logo