)
ander is dte geen clockrate
Martijn
-Oorspronkelijk bericht-
Van: LINSEN Jurgen (BMB) [mailto:[EMAIL PROTECTED]
Verzonden: vrijdag 8 augustus 2003 9:37
Aan: [EMAIL PROTECTED]
Onderwerp: RE: cisco back to back cable [7:71992]
Sure you're using a cross cable?
-Original Me
Sure you're using a cross cable?
-Original Message-
From: KW S [mailto:[EMAIL PROTECTED]
Sent: Monday, July 07, 2003 6:22 PM
To: [EMAIL PROTECTED]
Subject: cisco back to back cable [7:71992]
Dear All
I have a 2501 and 2505 and I am trying to set up a homelab..These 2
routers come
PROTECTED]
Onderwerp: RE: cisco back to back cable [7:71992]
In dutch, to keep things easy.
Denk dat je eerst even de zaken moet proberen.
controle kabel
checken met commando sh controller serial, zie je een interface type staan,
dus die dce/dte
sh interface serial x
Router# show interfaces se
or maybe try alternating the dce/dte settings on the serial interfaces
-Original Message-
From: LINSEN Jurgen (BMB) [mailto:[EMAIL PROTECTED]
Sent: 08 August 2003 09:37 AM
To: [EMAIL PROTECTED]
Subject: RE: cisco back to back cable [7:71992]
Sure you're using a cross
MB) [mailto:[EMAIL PROTECTED]
> Sent: Friday, August 08, 2003 2:37 AM
> To: [EMAIL PROTECTED]
> Subject: RE: cisco back to back cable [7:71992]
>
>
> Sure you're using a cross cable?
>
> -Original Message-
> From: KW S [mailto:[EMAIL PROTECTED]
> Se
Perhaps a copy of the configs would be helpful here.
-Original Message-
From: KW S [mailto:[EMAIL PROTECTED]
Sent: Monday, July 07, 2003 12:22 PM
To: [EMAIL PROTECTED]
Subject: cisco back to back cable [7:71992]
Dear All
I have a 2501 and 2505 and I am trying to set up a homelab..These
You need to set clock on one, I leave it as an exercise to the poster to
figure out which.
Brian
The path to a desireable destination
is often more difficult than the path to stay where you are.
On Mon, 7 Jul 2003, KW S wrote:
> Dear All
>
> I have a 2501 and 2505 and I am trying to se
h the wrap.
Good luck on your studies.
Mike
-Original Message-
From: KW S [mailto:[EMAIL PROTECTED]
Sent: Monday, July 07, 2003 9:22 AM
To: [EMAIL PROTECTED]
Subject: cisco back to back cable [7:71992]
Dear All
I have a 2501 and 2505 and I am trying to set up a homelab..These 2 routers
come
Dear All
I have a 2501 and 2505 and I am trying to set up a homelab..These 2 routers
come with a cable which is a DB60(DTE) and the other end is a DB60(DCE).This
is wat that is label on the cable. Anyway, I try to connect this cable to
the serial interface of the 2 routers...and both the routers a
9 matches
Mail list logo