actually come to think about it, u don't have the conditions for NNI
switching, u can't even do Hybrid switching, if the PVC through witch u wana
switch is DTE, i see only the option of frame switching over an ip tunnel,
but then again u have to have an ip segment available:
as far as configuration
>From what i can find, you will need to configure the interface as an NNI,
and then you frame-relay switch between 2 pvc you have on the router.
the problem is that subinterfaces are not supported by an NNI interface.
it can only be implemented on the main interface
so u will need 2 serial interfa
Hi
I want to configure my 2610 for frame relay into my telco.
Then clients from all over will connect with frame relay through the telco
into my 2610.
Now i need to have 2 pvc`s per client.One will terminate on my 2610 and the
other pvc needs to be switched through my 2610 and terminated on anothe
Hi Julian
yes u can do that by using ip unnumbered and using subinterfaces point to
pint
I cant get u properly from ur question what u mean
but see U can have many sub interfaces and all of them can use ip unnumbered
If anybody other will comenst lets wait for answers ,and if possible please
mail u
Hi guys
I am wandering if it is possible to configure my cisco 2610 for seperate
frame relay point to point subinterfaces with the ip terminating on the
2610,and have the 2610 frame switch some other dlci`s and terminate the ip
on another frame relay device at the same time.
Any advice is appreci
5 matches
Mail list logo
