HI All,
I would like to know what IP´s is crossing our serial interface to internet,
to accounting who is using more bandwidth.
How can I do that?
Thanks.
--
Paulo Roque
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/lis
On Thu, 22 Feb 2001, Paulo Roque wrote:
> HI All,
>
> I would like to know what IP´s is crossing our serial interface to internet,
> to accounting who is using more bandwidth.
> How can I do that?
what router model? The best way is using "ip route-cache flow", and
taking the flowstats into a fl
Hi,
You could try 'ip accounting' this only works outgoing on an interface so if you want
to check who on a lan is pulling the data put 'ip accounting' on the ethernet. This
will show who is pulling what. Put it on the wan interface to see who is sending from
your lan.
router#(conf-if)ip
Hi group
The following is a show ip traffic output from a Cat 2900XL:
Rcvd: 18668088 total, 17981099 local destination
0 format errors, 0 checksum errors, 0 bad hop count
0 unknown protocol, 686989 not a gateway
0 security failures, 0 bad options, 0 with options
Any
Hello,
Where I work, we have a number of servers being co-located at one
location and are planning on moving those servers to another co-location
provider soon. My boss asked me why we could not, when we move the
servers, just place a router at the original ISP to redirect all traffic
from the o
TECTED]]
Sent: Monday, April 22, 2002 9:16 AM
To: [EMAIL PROTECTED]
Subject: OT: Using a Router to redirect IP traffic [7:42217]
Hello,
Where I work, we have a number of servers being co-located at one
location and are planning on moving those servers to another co-location
provider soon. My boss
connect to ISP1, and use their own IPs.
How to route the client's ip traffic to pass through ISP1 and ISP2?
Thank you for your help.
Shawn
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
[GroupSt
Maybe you can put a router running NAT to hide the new addresses behind
the old ones.
K.
Koen Zeilstra
Legian
---
You know you're a little fat if you have stretch marks on your car.
-- Cyrus, Chicago Reader 1/22/82
On Mon, 22 Apr 2002, Trevor Jennings wrote:
Hi Trevor,
Assuming that your servers have unique public IP addresses and you can
get a small new address space from the colocation provider (for use as a
NAT pool) then this would be technically feasible using twice-NAT.
However, you would be paying your current colo provider for twice the
bandw
This is what I would do in your situation.. -Listing what i have
to do to keep the boss happy and save money for your firm.
1. Keep old IP's at the old datacenter, hitting live servers
at the new datacenter
2. Prevent the need to a second set of servers with DNS entries
seperate from the origina
Thanks to all those who replied about this question. We ended up just
setting up a server to redirect httpd requests to the new location. Seems
it was alot easier to do that rather than to play around with routing
issues.
Cheers,
- Trevor
Message Posted at:
http://www.groupstudy.com/form/re
Dear Friends,
I am trying to figure out how to block even/odd access out of the
subnet!. I have managed to see the effect of the last bit of the last
octet , yet wouuldn't know how to get the wild card mask !.
Could you please help me as I will be taking the CCAI fast track on
wednesday.
Suranjith
d will be
very annoying.
Ejay Hire CCNA,CCNP,CCIE Candidate
Network Consultant (Available, Cheap!)
[EMAIL PROTECTED]
434-591-4564
-Original Message-
From: Shawn Xu [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 06, 2002 2:29 PM
To: [EMAIL PROTECTED]
Subject: How to route this ip tr
Your mask for the last octet should end in an even number. This forces a
check of the last bit position. If you want to allow/deny an even number
then your "test against" address should end in an even number. If it is for
an odd number, then the "test against" address should end in odd.
Ex: a
Hello,
We have a MPLS network and we would like to provide for our customers
access into Internet. We do not want propagate Internet routes into our
MPLS network (it is too large). Instead we tried to use solution with EBGP
multihop to propagate Internet learned (via BGP) routes directly to our
15 matches
Mail list logo