Question that has been killing me...
On IOS versions after 12.0, the command #show ip bgp summary gives the
following output:
show ip bgp summary
BGP router identifier 5.5.5.6, local AS number 107
BGP table version is 174, main routing table version 174
13 network entries and 15 paths using 186
Something to do with VPN's i think...check cisco's website.
OSN
""Erik Groves"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Question that has been killing me...
>
> On IOS versions after 12.0, the command #show ip bgp summary gives the
> following output:
>
> show ip bgp sum
I believe scan time pertains to the frequency that a PE router queries a
VPNv4 route reflector to ensure that it has a complete routing picture for
its configured VPN's. This is 2547bis functionality. However, to me, this
requires support of outbound route filtering (ORF) and I'm not sure if Cisc
I checked all over Cisco's web site, and in the list of fields for show ip
bgp summary ,they do not list the value in those three. I have tried to
use the bgp scan-time , but changing this on both peers does not change
the value in show ip bgp summary. In RFC 2547bis, it talks a bit about
4 matches
Mail list logo