Useful link (hopefully) -
http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-xr-software/116350-trouble-ios-xr-mtu-00.html
- Ed
On Tue, Apr 28, 2015 at 4:34 PM, Jared Mauch ja...@puck.nether.net wrote:
What version of IOS-XR? What are the interface MTUs?
There were a number of
Bad SPA or bad SIP. Try moving the SPA to a different slot in the SIP. If it
comes up that could point to the original slot as faulty. If it doesn't help it
could be a bad SPA.
- Ed
On Apr 22, 2015, at 07:27, Jordi Magrané Roig jordimagr...@hotmail.com wrote:
Dear colleagues,
I have an
See the last two pages of this white paper:
http://www.cisco.com/c/dam/en/us/products/collateral/switches/me-3400-series-ethernet-access-switches/prod_white_paper0900aecd806ec6fa.pdf
- Ed
On Mar 3, 2015, at 09:39, M K gunner_...@live.com wrote:
I have the below topology
SW1 -- SW2 -- SW3SW1
There should be an SMU to suppress those informational messages. Apparently
they resulted in a bunch of unnecessary RMA's.
- Ed
On Nov 6, 2013, at 7:13, Antonio Soares amsoa...@netcabo.pt wrote:
Thank you for the feedback. It's good to know that the reload worked for
you.
The new bug tool
SDR is only available on IOS-XR devices 12K, ASR 9K, CRS.
- Ed
On Jun 28, 2013, at 1:10 PM, Dhamija Amit amiitdham...@yahoo.com wrote:
VRF Lite is only to separate the Global VPN Routing table . My requirement
is to have two routing domains i.e 2 AS Numbers in a single router , One to
be
While your mileage may vary I have has great success in doing this exact thing.
RMA sups don't necessarily come with the same code as what you are running. Put
the new sup in (same hardware, right?) and it should boot up into RPR standby
cold due to the mid matched code. At this point copy the
NETWORKS
Lead Engineer -BroadBand Connectivity
JNCIE-M (#471), JNCIE-SP (#1147), CCIP
Mobile : +216 29 349 952 / +216 98 349 952
FIX : +216 71 108 173
Skype : kayssar ben hammadi
kayssar.ben_hamm...@nsn.com
-Original Message-
From: ext Edward Salonia [mailto:e...@edgeoc.net
read, but I don't want to assume that things
not clearly stated were there. Our main use being etherchannel stuff.
-Lee
On Wed, Apr 24, 2013 at 10:21 PM, Edward Salonia e...@edgeoc.net wrote:
WL does LANPHY, WANPHY, and SONET/SDH.
L does only LANPHY
If you are just using this for 10gige LAN
Of Edward
Salonia
Sent: Friday, 26 April 2013 1:25 AM
To: Lee Starnes
Cc: cisco-nsp@puck.nether.net; cisco-nsp
Subject: Re: [c-nsp] SPA-1X10GE-WL-V2 vs SPA-1X10GE-L-V2
Sure. Future-proofing, when capable, is a good idea.
-Original Message-
From: Lee Starnes lee.t.star...@gmail.com
Date
WL does LANPHY, WANPHY, and SONET/SDH.
L does only LANPHY
If you are just using this for 10gige LAN interconnect, use the L. If you need
WAN/SONET support, get the WL.
- Ed
-Original Message-
From: Lee Starnes lee.t.star...@gmail.com
Sender: cisco-nsp
'sho run in te1/16'
Sounds like you have dtp on it currently and it doesn't like that... Try
defaulting the interface first?
--Original Message--
From: CiscoNSP List
Sender: cisco-nsp-boun...@puck.nether.net
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] 4500-X VSS
The Supervisor 2T provides backward compatibility with the existing WS-X6700
Series Linecards (with the exception of the WS-X6708-10G, which will be
replaced by the new WS-X6908-10G, discussed later), as well as select WS-X6100
Series Linecards only. There is no support for the WS-X62xx,
, at 14:12, An Nguyen angu...@emprisebank.com wrote:
Is it possible to configure sub-interfaces/VLAN interfaces from an
EtherChannel port?
Yes but there are a bunch of qos limitations for lag interfaces. Even more
so than for regular c6500 LAN card interfaces.
Nick
Thanks
From: Edward
I think it's also prudent to ask what release train are you currently running?
T train? SR? I know you said you were reading up on 15.1SY for the Sup2T. Code
train differences can be a big enough pain on their own, changing to a
different platform not withstanding.
As for qos, check out
Yes they (ES/ES+) are supported on 6500 as of 12.2(33)SXJ1 (No SUP32, just
720-3B and newer) and on 7600 as of 12.2(33)SRD
Though the ES+ XT 20/40 I am unsure if those are compatible with 6500.
- Ed
-Original Message-
From: Matt Addison matt.addi...@lists.evilgeni.us
Sender:
It sounds like and RMA as others have suggested...
Is there anything in the logs or diag about the card to indicate why it is not
coming up?
Is it showing as pwrdown on the sho mod output? If so, try 'power enable
module 1' from conf t and see what it says in the logs as to it running diag
I wonder if config lock is available on asa's?
http://esalonia.net/2010/11/18/config-lock/
- Ed
-Original Message-
From: Hansen, Ulrich Vestergaard B. (E W EN RD DT ES 1 2) u...@siemens.com
Sender: cisco-nsp-bounces@puck.nether.netDate: Wed, 6 Jun 2012 12:28:49
To:
Drops and overruns... Sounds like you are overloading your port buffer. Are you
getting bursts of traffic that might not register on traffic graphs polling at
5 minute intervals?
- Ed
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net]
Are you possibly referring to SyncE?
http://www.cisco.com/en/US/prod/collateral/routers/ps9853/white_paper_c11-500360_ns523_Networking_Solutions_White_Paper.html
-Original Message-
From: ujjwal maghaiya ujjwal...@hotmail.com
Sender: cisco-nsp-bounces@puck.nether.netDate: Mon, 23 Apr 2012
Should work.
What does show xconnect all give you on each side? Do you see the xconnect as
UP?
- Ed
-Original Message-
From: Amir Chaudhri amir.chaud...@ascertiva.com
Sender: cisco-nsp-boun...@puck.nether.net
Date: Thu, 13 Oct 2011 16:47:39
To:
Did you double check your config to dee if anything changed or got removed and
subsequently saved after your attempt to upgrade to 15M? Sometimes
commands/santax changes slightly between versions and a part of your config may
not have been carried over.
I have also seen situations where one
List,
I recently upgraded a few 2960 switches to 15.0(1)SE, and while they are
working fine, I did notice a strange syslog message upon boot-up that wasn't
previously there. The message is as follows:
*Mar 1 00:00:39.535: %DC-4-FILE_OPEN_WARNING: Not able to open
Waris,
Thanks for the input and taking the feedback into consideration to fix the FN.
Colby,
I've seen time and time again, people expecting to position this platform in an
environment other than what it is intended for. I'm not calling out anyone in
particular on this list but I've seen
I would try booting from the current image on the flash. Then, inside the
running IOS, copy that image to the tftp server just in case. Then, erase the
flash and copy the new image to the flash and reload. At least if the new image
still doesn't work you can tftpdnld via ROMMON the original
You may need to set it in VLAN database mode on that IOS version. See:
http://www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a0080890607.shtml#conf1
http://www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a0080890607.shtml#conf1-
Ed
On Fri,
Forgive me, I don't have any experience with these switches, just ME3400
series... Is there really no way to fix a corrupt IOS? Can you not simply
interrupt the boot process, drop to ROMMON format flash and tftpdnld the image
again?
Thanks,
Ed
-Original Message-
From: Jason Lixfeld
One thing to watch for is that there is no local switching among UNI ports.
You could either set your port type to NNI or you could set the vlan as a
community vlan to enable local switching. What platforms were you looking
at? ME3400, 3750ME? You should take note that the ME3400
series doesn't
: Cisco NSPscisco-nsp@puck.nether.net
Subject: Re: [c-nsp] ME Series for a LAN/Server Farm
On Wed, Dec 8, 2010 at 16:50, Edward Salonia e...@edgeoc.net wrote:
One thing to watch for is that there is no local switching among UNI ports.
You could either set your port type to NNI or you could set the vlan
Correct. After changing from ascending to descending and reloading, it will
assign them from the top down.
-Original Message-
From: Jason Lixfeld ja...@lixfeld.ca
Sender: cisco-nsp-boun...@puck.nether.net
Date: Thu, 2 Dec 2010 17:38:08
To: cisco-nsp@puck.nether.net
Subject: [c-nsp]
You can expect the ipservices to give you dynamic routing, among other things.
Check out http://cisco.com/go/fn and compare 2 images to see the specific
features.
- Ed
--Original Message--
From: Jeremy Parr
Sender: cisco-nsp-boun...@puck.nether.net
To: cisco-nsp@puck.nether.net
Subject:
You could look at something like this:
http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=ACF001
It gets installed in the bottom of the rack to take air from below the
raised floor and blow it up the front of your cabinet. It has a built in
(replaceable) filter, so it will
Take a look at the ME3400 series.
- Ed
--Original Message--
From: Paul Stewart
Sender: cisco-nsp-boun...@puck.nether.net
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] IPTV Switch Recommendation
Sent: Jun 10, 2009 1:25 PM
Hi there.
We have a customer that does lots of IPTV - they
You should be able to get one for free.
https://tools.cisco.com/SWIFT/Licensing/jsp/formGenerator/Pix3DesMsgDisplay.jsp
- Ed
On Wed, Feb 25, 2009 at 8:29 AM, Alex Moya alexm...@bellsouth.net wrote:
I need help finding a unlock code for the PIX-515e to get I to a 3des
encryption. Does the unit
33 matches
Mail list logo