Hi,
I have this problem too. I found all of the transceivers which show the log:
%SFF8472-5-THRESHOLD_VIOLATION: Portx/x: Tx power high alarm; Operating
value: A dBm, Threshold value: B dBm.aren't cisco. They are OEM
(Original Equipment Manufacturer).
Thank you very much.
My problem is serious in ip nat inside source list 114 pool pool_vrf_DR vrf
DR command.
https://supportforums.cisco.com/sites/default/files/attachments/discussion/c
ant_configure.jpg
Thank you very much.
___
cisco-nsp mailing list
Such as:
(config)#mls ip multicast flow-stat-timer 9
Warning: This command is no longer supported.
snmp-server enable traps ethernet cfm alarm
ip nat inside source list 114 pool pool_vrf_DR vrf DR
ip nat inside source static 172.16.76.66 10.10.58.1 vrf MR
#sho platform port-asic stats drop gigabitEthernet 0/5
Interface Gi0/5 TxQueue Drop Statistics
Queue 0
Weight 0 Frames 0
Weight 1 Frames 0
Weight 2 Frames 0
Queue 1
Weight 0 Frames 0
Weight 1 Frames 0
Weight 2 Frames 0
Queue 2
Weight 0
I test lab follow to this document
http://www.cisco.com/c/en/us/td/docs/ios/12_2sb/12_2sba/feature/guide/vrfli
te.html#wp1059340 is work. I test with static route and OSPF is work. Now,
I'm testing with BGP route. I found the PE doesn't send the BGP routes from
the other sites to the CE. How
Hi,
Can you describe the traffic going through the switch?
I think l2 and l3 mpls VPN. I'm not sure. How could I know?
It looks like the CPU is getting pushed up due to IGMP snooping.
But the IGMPSN process is just about 10%.
Is there any possibility that you have the 'layer-2' SDM
Its most certainly not. If you neither know the exact configuration of the
box, nor if the box is layer 2 or layer 3 switching, then you better not
partition the tcam for a specific purpose.
Check logging, check your routing table. If you have a routing-table (aka
ip routing in the config),
Hi,
The ME3400 is high CPU. How should I do next?
3400#sho proc cpu sor 5se
CPU utilization for five seconds: 86%/56%; one minute: 86%; five minutes:
86%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
158 39305748352893146351 0 16.77% 15.98% 16.03% 0
Hi,
Could I disable auto generate the command?
Thank you very much.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
k1#sho int te1/4
Last clearing of show interface counters 00:12:35
Input queue: 0/200/69739/69739 (size/max/drops/flushes); Total output
drops: 0
k1#sho ver
Cisco IOS Software, c7600s72033_rp Software
(c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRD1, RELEASE SOFTWARE
(fc4)
Hi,
FYI
Thank you very much.
From: Aaron [mailto:dudep...@gmail.com]
Sent: Tuesday, September 16, 2014 8:39 PM
To: PlaWanSai RMUTT CPE IX
Cc: cisco-nsp
Subject: Re: [c-nsp] install add SMU on GSR12000 Error: Cannot proceed with the
add operation because there are too many rmation
Hi,
RP/0/14/CPU0:router#adm ins rem ina ?
asynchronous Perform an asynchronous remove operation (default)
prompt-level Set the prompt level
synchronous Perform a synchronous remove operation
test Test only - do not make any changes
cr
Hi all,
RP/0/6/CPU0:router#adm install add tar ftp://1.1.1.1/c12k-4.2.1.1409082.tar
syn
RP/0/6/CPU0:Sep 16 06:58:03.102 : instdir[241]:
%INSTALL-INSTMGR-3-INSTALL_OPERATION_USER_ERROR : User error occurred during
install operation 166. See 'show install log 166 detail' for more
infoError:
Hi all,
I found the problem my customer's TOS is rewritten.
Topology:
Tester1 (Send CoS=5) -- Gi0/0/1/0 ASR9k 0/0/1/0.3604 -- xconnect --- Gi0/9
ME-3600X Gi0/24 -- Gi0/14 ME-3400 Gi0/5 -- Tester2 (rx CoS=0)
I open the TAC both ASR and ME Switch Team and this is the answer from ME
Switch Team:
Hi all,
TGN#sho int g0/1 tra
TX power 300 nW / 5 dBm (+/- 3dBm)
What is power in dBm?
Thank you very much.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
Which IOS version for 1841 router can use PPPOE on sub-interface?
Thank you very much.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
I used these commands, they worked.
rommon 1 TURBOBOOT=on,disk0,format
rommon 2 sync
rommon 3 boot usb:asr9k-mini-px.vm-4.2.3
Thank you very much.
-Original Message-
From: Jared Mauch [mailto:ja...@puck.nether.net]
Sent: Tuesday, May 13, 2014 2:47 PM
To: PlaWanSai RMUTT CPE IX
Cc
RP/0/RSP0/CPU0:ios(admin)#install activate *4.2.3* synchronous
Error:Cannot activate the following os-mbi package because the system is
Error:membooted:
Error:mem:asr9k-os-mbi-4.2.3
How should I do?
Thank you very much.
___
But this problem occurs on router. Some router can't get ASN.
Thank you very much.
From: Aaron [mailto:dudep...@gmail.com]
Sent: Thursday, March 13, 2014 9:21 PM
To: PlaWanSai RMUTT CPE IX
Cc: cisco-nsp
Subject: Re: [c-nsp] Traceroute doesn't see ASN
It depends on the implementation
Why doesn't CRS-1 share power load?
RP/0/RP0/CPU0:cm-1(admin)#sho env pow
Power SupplyVoltageCurrent
DC-PEM DC-PEM(V) (A)
Zone 1:[A], [B]53.005, 54.083 3.238, 10.968
Zone 2:[A], [B]
Hi all,
Why some device can see the ASN?
RP/0/RP0/CPU0:R2-CRS#traceroute
Wed Mar 12 14:14:00.237
Protocol [ipv4]: ipv4
Target IP address: www.facebook.com
Source address:
Numeric display? [no]:
Timeout in seconds [3]:
Probe count [3]:
Minimum Time to Live [1]:
Could you specify which card is a problem?
Thank you very much.
-Original Message-
From: Sukumar Subburayan (sukumars) [mailto:sukum...@cisco.com]
Sent: Wednesday, January 15, 2014 10:25 PM
To: PlaWanSai RMUTT CPE IX; cisco-nsp@puck.nether.net
Cc: Panuwat Santukaw; Somphong Pokfai
Has anyone ever used Redback connected with cisco and configure as PPPOE?
Why can't burst traffic over 7Gbps on 10G interface?
How should I do?
Thank you very much
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi,
switch that connect with PE1 is ME-C3750-24TE. And PE1 is 7609-S.
Thank you very much.
-Original Message-
From: Pshem Kowalczyk [mailto:pshe...@gmail.com]
Sent: Tuesday, September 03, 2013 9:25 AM
To: PlaWanSai RMUTT CPE IX
Cc: cisco-nsp@puck.nether.net; p.pansa...@gmail.com
Hi all,
I used this configure on PE1:
interface GigabitEthernet9/16.12
description test redundant psedowire
encapsulation dot1Q 12
xconnect 10.5.0.38 1138074000 encapsulation mpls
backup peer 10.5.0.87 1174087000
end
When I shutdown interface of
Hello all,
How to configuration mpls l2vpn between asr9k and 3750? Help
me please!
Thank you very much.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
To: PlaWanSai RMUTT CPE IX; cisco-nsp@puck.nether.net
Subject: RE: [c-nsp] How to configuration mpls l2vpn between asr9k and 3750?
Help me please!
Assuming you are using the ME-C3750-24TE , here's a sample config that's
working for us (MPLS MUST be enabled on one of the special ES Uplink ports for
any
Hi all,
Cisco switches started logging errors of the following type:
%MCAST-SP-6-MLD_ADDRESS_ALIASING_NORMALMODE: Address Aliasing timer
expired reinstalling entry for group xx33..0016 on vlan 780
How should I do? Please help me.
Thank you very much.
Hi all,
RP/0/RSP0/CPU0:b2#sho ip pim vrf X nei
Fri Aug 9 11:35:58.352 BKK
No neighbors found for VRF X.
RP/0/RSP0/CPU0:b2#sho ip pim nei
Fri Aug 9 11:44:56.613 BKK
PIM neighbors in VRF default
Neighbor Address Interface UptimeExpires DR
pri Flags
10.127.1.93*
Hi all,
I saw the LED status of FC is turn off. Do you have command show led
status on FC card? Or solution to test that the FC card is still running. I
hope this fail in LED only.
Thank you very much.
___
cisco-nsp mailing list
Hi all,
Do you have command for auto reoptimize Traffic Engineering
by the router? When option 10 down and then up it can reoptimize by itself
to option 10.
Thank you very much
Mr. Nattawat Kaewmanee
___
cisco-nsp mailing list
Hi,
My customer found Card 12000-SIP-601 always reboot. He moved services to
another card. But, The router has still this log occur always follow to this
attach file. From message I think maybe cause from software force (software
force crashes ,sig=23) so the time that line card is restarting,
Do you have document prove this problem for my customer ?
Thank you very much.
-Original Message-
From: Mikael Abrahamsson [mailto:swm...@swm.pp.se]
Sent: Wednesday, July 10, 2013 6:14 PM
To: PlaWanSai RMUTT CPE IX
Cc: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] Card 12000-SIP-601
Could you please how to CoPP (Control Plane Policing) configuration?
It has a best practice for each model?
Now, I want configuration for ME-3600x.
Thank you very much.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
. For traffic that fragments.
5. For All
I don't know these are enough. And What is a number should be use for police
each access-list?
Thank you very much.
-Original Message-
From: Mack McBride [mailto:mack.mcbr...@viawest.com]
Sent: Friday, June 14, 2013 1:22 AM
To: PlaWanSai RMUTT CPE IX; cisco
122 permit icmp any any port-unreachable
access-list 122 permit icmp any any echo-reply
access-list 122 permit icmp any any echo
Thank you very much.
-Original Message-
From: Luis Anzola [mailto:anzo...@gmail.com]
Sent: Friday, June 14, 2013 10:03 AM
To: PlaWanSai RMUTT CPE IX
Cc: Mack
I want to know a maxinum number on 4900M platform below:
1. Total active STP logical ports
2. Total virtual ports per line card
Thank you very much.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Dear All ,
We're using GSR12000. We've got linecard reboot for 2 day in same
time.
We have attached some logging information below. Please help to check if you
can give any advice will be appreciated.
If you need more information please let me know.
38 matches
Mail list logo