Hello all,
I have inserted the PA-FE in the chassis after the router has booted, here
is an output of a show diag :
Slot 1:
Fast-ethernet (TX-ISL) Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 00:00:04 ago
EEPROM contents at hardware dis
The PA-FE is Wellington recognized if I recall correctly...
I'll try it again and see just to be sure.
Y.
Le 8 mars 2010 à 18:39, "Buhrmaster, Gary" a
écrit :
When PA-FE1 is in slot1, the router loops during boot and the
following
appears :
Have you tried booting, and then plugging
Hello,
As I sais in my first post, I had to upgrade the bootloader because it
was too old but the slot was perfectly working then. This is why it's
bugging me so much...
I'll check the backplane for any Bent pins but still...
Y.
Le 8 mars 2010 à 18:29, Eninja a écrit :
Youssef,
You
Youssef,
You've answered your own question- you have a bad slot 1. Check to see
if there are any bent pins in it/make sure the PAs actually seat
properly in it. ITMT, avoid using slot 1 to prevent further reloads.
/eninja
"When I remove the PA-FE from slot 1 or insert it in another slot (2
Hello Philip,
By default, the router boots with all its PA-FEs in shut down state.
I have tried to reboot several time (in shut down state), always the same.
Y.
2010/3/8 Philip Davis
> What happens if you boot with F1/0 configured for a shutdown state?
>
> On 3/8/2010 10:42 AM, Youssef Beng
Hello,
It's a possibility I have considered as it is a refurb chassis.
Any other ideas ?
Thanks.
Y.
2010/3/8 Manu Chao
> hardware issue: connector?
> On Mon, Mar 8, 2010 at 4:42 PM, Youssef Bengelloun-Zahr wrote:
>
>> Hello community,
>>
>> I received a 7204VXR chassis with a I/O controler
hardware issue: connector?
On Mon, Mar 8, 2010 at 4:42 PM, Youssef Bengelloun-Zahr wrote:
> Hello community,
>
> I received a 7204VXR chassis with a I/O controler (no FE ports on it) et
> plugged in it an old NPE-400 plus 2 PA-FE.
>
> PA-FE 1 in in slot 1.
>
> PA-FE 2 is in slot 2.
>
> Upgraded my
Hello community,
I received a 7204VXR chassis with a I/O controler (no FE ports on it) et
plugged in it an old NPE-400 plus 2 PA-FE.
PA-FE 1 in in slot 1.
PA-FE 2 is in slot 2.
Upgraded my bootloader with c7200-boot-mz.120-22.S.bin and my version of IOS
is c7200-adventerprisek9-mz.122-33.SRD.bi
