Hi Art,
This looks like the vacuum bag technique will be
the ideal clamping method. Just google it for
ideas. I have an old refrig compressor that is
waiting for a project but nothing coming up soon for me yet.
When you're finished you can tell the crew ,"It's
a work of Art."
Che
I build guitars and it is hard to clamp something in the middle of a guitar
top or back. The solution is something they call a go bar deck. Were you
use fiber glass rods wedged to apply pressure. If you have ever put
sheetrock on a ceiling and used a 2x4 wedged against the floor to hold it up
Arthur:
I would try using a razor blade to make a long slits along the grain. Then
I would apply heat to insure all is dry inside. With the area warmed again
I would try to lift the veneer slightly and put glue inside using a large
syringe. Tight bond makes a water proof glue that sets up
If it was my boat, I think I'd try to inject glue (waterproof Titebond? or
epoxy) into the blister with a syringe. You can buy glue syringes at Lee Valley:
http://www.leevalley.com/en/wood/page.aspx?p=20003&cat=1,110,42967&ap=1
But I suspect they're available all over - Harbour Freight? as your in
I think the iron method may work. The heat will soften the glue and the
iron would press it down. There is no way to clamp it flat on the wall. Good
luck-Bill Sterling
In a message dated 11/6/2012 3:54:23 P.M. Eastern Standard Time,
rothassocia...@verizon.net writes:
I hope someone on
You need to post the question to cnc-list@cnc-list.com, not
"cnc-list-boun...@cnc-list.com"
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Roth
Arthur
Sent: Tuesday, November 06, 2012 3:49 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Need Legal advice please
Hello
Joel,
Thanks very much for your help. I apologize for bothering everyone with my
dumb mistake. I got the email through jus fime using the correct address.
Art
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel
Aronson
Sent: Tuesday, November 06, 2012 3:52 PM
To: cnc
I hope someone on the list may have a suggestion as to how to address/fix my
problem.
Sometime during the last month or so, water must have gotten into the boat
from the deck as yesterday while cleaning up below, I found several
blisters/delamination of the teak veneer on the upper far port si
Art,
The address to start a new thread is cnc-list@cnc-list.com. No bounce!
On Tue, Nov 6, 2012 at 3:48 PM, Roth Arthur wrote:
> Hello everyone,
>
> ** **
>
> I’m sorry to break into this string of very important emails, but I have
> been trying to post a question about a problem I’m havin
Hello everyone,
I'm sorry to break into this string of very important emails, but I have
been trying to post a question about a problem I'm having with my boat and
it seems that when I send the email it is not being posted. I'm mailing to
the cnc-list-boun...@cnc-list.com address. I will be gra
It pays to ask "Y";)
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Eric
Baumes
Sent: Tuesday, November 06, 2012 2:42 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Need Legal advice please
In a storm here a couple years ago boat A broke loose and hit boat B
In a storm here a couple years ago boat A broke loose and hit boat B. Boat
B tried to collect from Boat A's insurance (X). Boat A's insurance X said
"Act of God" and did not pay. Boat B's insurance (Y) paid for the damages
(less deductible). Boat B sued Boat A to get deductible back. Boat B lost.
So, Christmas is a month away. Does this mean you won't forget us all again
this year?
Rich Knowles
Indigo. LF38
Halifax
On 2012-11-06, at 11:32, "Dennis C." wrote:
Speaking of the HMS Bounty, perhaps you've noticed that my email address,
captbuy (at) yahoo.com is a play on Captain Bligh, com
Speaking of the HMS Bounty, perhaps you've noticed that my email address,
captbuy (at) yahoo.com is a play on Captain Bligh, commander of the Bounty at
the time of mutiny. As many of you know well, a boat "captain buys" lots of
"stuff". :)
Dennis C.
Touche' 35-1 #83
Mandeville, LA
___
14 matches
Mail list logo
