The tube is supposed to vent accumulated gasses to the intake. Usually
exhaust gas blow by the rings. Some oil carry over is normal and a brillow
paf style if separator can usually be found at the valve cover where the
tube attaches. Excessive blow by is indicative of stuck, worn, or broken
Lube them a little with Vaseline or dish soap just to be sure. I made this
video a year ago for work. Different pump... Same idea. It demonstrates
the Globe Run-Dry impeller and the Jabsco impeller puller.
https://youtu.be/AYs662eKTFs
Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD
On Sun,
Hi Dave,
Your assumption is correct.
The vanes travel from inlet to outlet the long way around the
housing. The cam allows the water to be squeezed so it goes through
the outlet port.
Although not necessary, orienting them in the direction of travel is
a good practice.
Cheers,
Thanks Alan- That sure wil make the job easier (at least until someone
disagrees). I love this list! Dave
> On Apr 22, 2018, at 10:58 PM, ALAN BERGEN via CnC-List
> wrote:
>
> It doesn't matter which way the vanes are turned, when you install the
> impeller. As
It doesn't matter which way the vanes are turned, when you install the
impeller. As soon as the engine turns over, the vanes will correct
themselves.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
On Sun, Apr 22, 2018 at 7:34 PM, David Knecht via CnC-List <
cnc-list@cnc-list.com>
I checked the impeller on my Sherwood water pump and it was OK, but I am
unclear how to reassemble it. Here is a diagram of the design.
I removed the air filter holder from my engine today to check on whether it
needed cleaning and was surprised to find the filter soaked in oil and a
significant amount of oil inside the housing. I found there was a tygon/rubber
tube running from a fitting on the top of the engine that ended
No, it's a polymer. And I don't claim to understand the difference between a
wax and a polymer, but it's supposed to be better. And although I am using
Poli Glow, when I recommended this to my buddy, he was quite astounded when he
came back through the canal, and did not have a mustache.
Should be there at the bottom.
On Sun, Apr 22, 2018 at 7:20 PM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> Added where? I checked the original url and only found the original
> pictures.
>
> Josh
>
> On Sun, Apr 22, 2018, 6:54 PM Joel Aronson via CnC-List <
>
I used it for years on my 27. The build up got so bad that it cost me over
$1,000 to have it removed. The gelcoat underneath was like new though. Jerry
-Original Message-
From: Rick Brass via CnC-List
To: cnc-list
Cc: Rick
Ron,
Are the spinnakers symetrical or asym?
Gary
S/V Kaylarah
~~~_/)~~
On Sun, Apr 22, 2018 at 10:12 AM, Ron Ricci via CnC-List <
cnc-list@cnc-list.com> wrote:
> I have four genoas, two spinnakers (3/4 & 1.5 oz.) and a mainsail
> (Mylar-Kevlar) that I don’t need. Some are in
Sounds a lot like PoliGlow or New Glass except a lot less expensive.
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill
Coleman via CnC-List
Sent: Sunday, April 22, 2018 12:59 PM
To: cnc-list@cnc-list.com
Cc: Bill Coleman
Added where? I checked the original url and only found the original
pictures.
Josh
On Sun, Apr 22, 2018, 6:54 PM Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> It’s done! Photos of the finished product were added.
>
> Joel
>
> On Mon, Apr 16, 2018 at 7:34 PM
It’s done! Photos of the finished product were added.
Joel
On Mon, Apr 16, 2018 at 7:34 PM wrote:
> Looking great Joel. The shade will be much appreciated. And it is a
> great place for the solar panels. Out of sight and out of mind.
>
>
>
> Jake
>
>
>
> *Jake
I use Rejex on Touché’s white boot stripe. Noticeable difference when removing
the yuck.
Awlcare for the topsides.
Dennis C.
Sent from my iPhone
> On Apr 22, 2018, at 11:58 AM, Bill Coleman via CnC-List
> wrote:
>
> Rejex.
>
> http://rejex.com/marine/
>
>
Rejex.
http://rejex.com/marine/
http://www.truevalue.com/product/car-wax-polymer-sealant-and-stain-barrier-1
6-oz-/14823.uts
Way better than any Wax I have ever used. Everyone I have suggested it to
swears by it.
Bill Coleman
C 39 Erie, PA
-Original Message-
From: CnC-List
I have four genoas, two spinnakers (3/4 & 1.5 oz.) and a mainsail
(Mylar-Kevlar) that I don’t need. Some are in almost perfect condition and the
others are in very good to excellent condition. Check out the link:
https://1drv.ms/f/s!AhpB-lul9d5YgwwnK_wNiF3vMoCA which includes a spreadsheet
17 matches
Mail list logo