Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread Josh Muckley via CnC-List
Remember that the gunk comes as a result of water so if you had water before but didn't correct the source then you could still have water introduction. Josh Muckley S/V Sea Hawk 1989 C 37+ Solomons, MD On Thu, Oct 17, 2019, 10:01 PM Derek McLeod via CnC-List < cnc-list@cnc-list.com> wrote: >

Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread Derek McLeod via CnC-List
The yard did remove the tank and disposed of the diesel and weird floaty gunk. I remember taking a picture of it with my phone I suppose through an inspection port and seeing the dark gunk on the bottom. It was back in September 2017, just checked. I wouldn’t imagine that it would return in two

Re: Stus-List Gargantuan Power Boat

2019-10-17 Thread Russ & Melody via CnC-List
Hi Bill, I don't know the boat but I bet they shut the lights off for an hour on Earth Day. :) Cheers, Russ At 09:30 AM 10/12/2019, you wrote: Does anyone who has gone to the Sailboat Show know anything about the huge boat in front of the Annapolis Yacht Club? You cannot even

Re: Stus-List Mattapoisett harbor mishaps...

2019-10-17 Thread Joel Aronson via CnC-List
Danny That bites! Call your insurance company and insist on a survey. Joel On Thu, Oct 17, 2019 at 4:43 PM Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > Well, I just heard from Peter Costa... another boat, right next to me, > Panache, broke free of its mooring and slammed into

Stus-List Mattapoisett harbor mishaps...

2019-10-17 Thread Danny Haughey via CnC-List
Well, I just heard from Peter Costa... another boat, right next to me, Panache, broke free of its mooring and slammed into my boat...  Apparently, his bow pulpit grabbed my anchor and ran off with it, slamming into another boat.  pulled the anchor and rode, beat the hell out on my pulpit, bent

Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread David Knecht via CnC-List
I had this happen with the Yanmar in my previous C 34 years ago after going over a particularly steep ferry wake. It was definitely air in the fuel line. I did not change any filters. At the recommendation of a local mechanic, if I remember correctly, the simple fix was to pull the

Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread David Risch via CnC-List
Change your filters, but if your tank is full of crap, which over the years many of ours have and which settles to the bottom unless disturbed in crappy weather, polishing (what the yard probably did), will not fully remove. Short of removing the tank, or thoroughly cleaning (removing fuel,

Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread Gary Russell via CnC-List
If your fuel level is on the low side (say less than 1/2 tank), you may be picking up some air in the fuel which will definitely kill a diesel. In my case (35 MK II) the fuel pickup was at the starboard end of the tank and rolling to port introduced air and the engine would quit. Took me years

Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread Marek Dziedzic via CnC-List
Check your fuel pick up tube (in the tank). The debris (gunk) could have fouled it, as well. Marek ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list -

Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread Doug Mountjoy via CnC-List
Derek, Sounds like your fuel filters are plugged. here is a good video of changing your fuel filters and bleeding the fuel system. Its not a hard job, but it can be a bit messy. have lots of oil diapers on hand. https://www.youtube.com/watch?v=ub0zfW42mVo Doug On Thu, Oct 17, 2019 at 9:02 AM

Re: Stus-List Engine cut out in rough seas

2019-10-17 Thread Andrew Burton via CnC-List
Do you have a Racor-type fuel filter? If so, my bet is that it’s clogged. No doubt the remaining crap in the bottom of the tank was again stirred up. This is a pretty common problem. Also, if you have a Racor filter make sure it’s a 30 micron. I’ve seen many boats with 5 micron filter elements

Stus-List Engine cut out in rough seas

2019-10-17 Thread Derek McLeod via CnC-List
Hi, Any suggestions as to troubleshooting my Yanmar 2GM that cut out on me in rough seas the other day? It was windy and confused waves near the shore of the Toronto island. I was motoring out of the channel, rounded into the lake and it died and wouldn’t restart. This happened a couple years

Re: Stus-List The day has come...selling my beloved 34

2019-10-17 Thread John Conklin via CnC-List
Amazing deal for someone will spread the word ! Just for the new engine and prop and electronics worth well over $12k no? Good luck sir John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On Oct 17, 2019, at 7:10 AM, John and Maryann Read via CnC-List wrote:  HI Sean Sorry to

Re: Stus-List The day has come...selling my beloved 34

2019-10-17 Thread John and Maryann Read via CnC-List
HI Sean Sorry to hear you are selling – at the asking price she is a true bargain. Price seems a bit low??? John and Maryann Legacy III 1982 C 34 Noank, CT From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of SEAN CONNER via CnC-List Sent: Wednesday,

Stus-List Boats for Sale

2019-10-17 Thread ALAN BERGEN via CnC-List
There's a C 24 for sale at Rose City YC in Portland, Oregon. Price is $5500. For more info contact Jim Johnsrud at (503) 281-2610. Also, there's a C 35 Mk III for sale by Jake Brdersen In Virginia. Price is $25,500. For more information contact the broker, Ron McClain, at (757) 434-2007. Alan