For reference, here's a pic of Touche's jib track.
https://drive.google.com/file/d/0B_sb5TfIENvsOWdQOXM1aEQzb0U/view?usp=sharing&resourcekey=0-_jwd_f8MH2sUnmMrG17D_g
The track was located in coordination with my sailmaker when he made the
95% headsail.
I trim the 95 between the forward lower and
Just got back from almost 6 weeks on our 35-2, but it has a custom Solent
rig with two furlers, 135 on outer, 95 on inner. At the halfway point, the
old Harken mk1 furler top swivel exploded and rained bearings on the deck,
fortunately on the way in, not out.
Anyway, that meant rigging our 95 blade
When you open the winches for maintenance on the boat, a good idea is to use a
shoe box with a hole made in the bottom. If anything shoots, it will end up in
the box.
Btw. once you disassemble everything you can take the box off for better access
(put it back before reassembly)
Just an idea.
West Marine used to carry pawls and springs that fit Barient winches
On Wed, Jul 13, 2022 at 11:23 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> Does anyone know the drum diameter of the Barient 26s that are on the 35
> MK I?
>
> Also do I dare take them apart for greasing? I
I am afraid I'm going to have to ditch my standard horizon 850 handheld. It
has gotten so gooey, I can't stand to touch it, not to mention any place I
leave it, it leaves gooey stuff. I blame the company for outsourcing to
China. I wonder if anybody has a handheld that they feel the rubber is of a
Drum:
Base 7.0" dia
Top: 6.0" dia
Rope Drum: tapered, 3.5" dia widest at bottom.
Let me know if you need more info, I have one apart in my garage.
Neil Gallagher
Weatherly, 35-1
Glen Cove, NY
On 7/13/2022 2:22 PM, Della Barba, Joe via CnC-List wrote:
Does anyone know the drum diameter of t
Those are pretty much generic, just find and measure one from the other
winch, and order a bag from McMaster!
Bill
On Thu, Jul 14, 2022, 09:20 Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
>
>
> Thanks everyone!
>
> I’ll just go measure the winch, I can’t seem to find that spec a
Google search indicates the base diameter as 7 inches.
I'd guess the drum is 3 1/2 to 3 3/4 inch diameter.
--
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Thu, Jul 14, 2022 at 8:20 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
>
>
> Thanks everyone!
>
> I’ll just go measure th
Thanks everyone!
I’ll just go measure the winch, I can’t seem to find that spec anyplace online.
As for the springs, last time I greased the winches one launched itself
overboard. Back then they were in stock at West Marine. Maybe not so much now?
Joe Della Barba
From: Rick Brass via CnC-List
