Stus-List Re: Rigging replacement

I had the rod rigging replaced on my 35 Mark 3 which I’ve since sold and replaced with a Quest 33. I was racing the boat, didn’t want to take a change on losing the rig which was at the time was 30 years old. The cost to replace it was $8K. Dave Jacobs Quest 33, Oops! Bristol, RI > On Mar

Stus-List Re: Anchor roller question

Where are you located. I have a Roca 35 that I don’t need anymore. I used it on one cruise. Dave > On Dec 2, 2020, at 1:14 PM, NORTHERN LIGHT > wrote: > > Hey Pete, > > I’ve used both a 15 and a 20kg Rocna on my 37. Both work well, except the 20 > kg will also work in extreme conditions.

Re: Stus-List Sunglasses favorites

Vuarnets feel like giving your eyes a cool glass of water. > On Aug 10, 2020, at 11:03 AM, Della Barba, Joe via CnC-List > wrote: > > My all-time favorites are H2Optix. Sadly not made for years now L > > > Joe Della Barba Coquina C 35 MK I > www.dellabarba.com

Re: Stus-List Mantus anchor feedback

I have a 35 lb Mantus that was used for one week on a cruise (it worked great on my C 35 Mk3) and that’s been sitting in my garage for two years. If you’d like to pick it up in Bristol, RI you can have it for 75% of whatever you were going to pay for it. Just let me know. Dave J > On Nov 29,

Re: Stus-List C 35 MK III For Sale (New London, CT)

Has the rod rigging ever been replaced? Fresh or raw water cooled engine? Pressure hot and cold water? Age and condition of sails? I sold my 1984 35 MK III 2 years ago, am currently sailing a 37’ Beneteau and am thinking about going back to the C Thanks, Dave Jacobs > On Aug 21, 2019, at 12:04

Re: Stus-List C 40 Peregrine for sale

All that comes to mind is WOW! Dave J Saltaire 35 M3 Bristol, RI > On Dec 11, 2017, at 7:06 PM, Dennis C. via CnC-List > wrote: > > Ya done good. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Mon, Dec 11, 2017 at 4:04 PM, Andrew Burton via CnC-List >

Re: Stus-List Looking for a C 35 MKI

Mike, My C MK3, located in Bristol, RI is available. The listing can be seen at http://www.yachtworld.com/boats/1984/C%26C-35-MKIII-3131373/Bristol/RI/United-States#.WhhGfs33NOU.email Best Regards, Dave J

Re: Stus-List C 35 MK III full set of North racing sails

Please do, Thanks Dave > On May 19, 2017, at 10:46 PM, David Jacobs via CnC-List > <cnc-list@cnc-list.com> wrote: > > Bob, > > Please let me know if you will sell the main separately and if so just let me > know how much. > > Thanks, > Dave Jacobs &g

Re: Stus-List C 35 MK III full set of North racing sails

Bob, Please let me know if you will sell the main separately and if so just let me know how much. Thanks, Dave Jacobs C 35 MK iii Saltaire Bristol, RI > On Mar 7, 2017, at 11:16 AM, Bob Curtiss via CnC-List > wrote: > > Need to sell! NorLam 155% Genoa, Kevlar Blade

Re: Stus-List CC drawings from Maritime Museum of the Great Lakes

Rob, If you’re writing an article about on the evolution of keels in sailing yachts, if you haven’t you should visit the Herreshoff Museum in Bristol, RI. They have a temperature and humidity controlled room with all of the Herroshoff half hull models that were carved by hand by captain

Stus-List 3GM Transmission

My 1984, 35 MKIII has its original Yanmar 3GM and a 1984 Martec folding prop. I was experiencing really bad vibration at the end of the season as if the prop wasn't opening or as if only 1 of the 2 blades was unfolding. I'd put it in reverse (during which there was never any of the vibration)

Re: Stus-List Folding prop

I have the same issue with a Martec (not geared) and am sending it back to them for refurbishment which they recommend every 5 years. They drill out the holes that the dowels go through and install the next size diameter pins. I suspect that flexofold has a similar procedure. All summer I was

Re: Stus-List CC for sale locally

This boat's been on the market for a very long time. When I was looking last year I was told by a broker that the deck was soft but that the owner fixed it and did a good job.I never did go to see it though. Dave J Saltaire CC 35 MK3 Bristol, RI From: CnC-List

Re: Stus-List survey now brokers

I was very hesitant to pay someone to help me purchase a boat but I ended up using a broker, Bill Shaw in Barrington, RI when I purchased Saltaire. Bill did a great job. He suggested that I reduce my offer to what was even further lower than market value and saved me several thousand dollars. He

Stus-List Barrier Coating

I'm having my boats bottom soda blasted and then I'm going to be applying a barrier coating. The yard recommended 7 coats of Interlux Interprotect 2000E barrier coat which frankly seems a bit much. According to them, Interlux (who recommends 4-5 coats 10 mil minimum) won't honor their warrantee if

Re: Stus-List thread reply and rod rigging

David, I purchases a 1984 CC 35 MK3 last fall and had the rod all replaced. The cost was $8K. However, the boat had been stored in doors every winter since it was built and except for the rudder was totally dry. It was on the market for $38K and I eventually purchased it for $24. Add the

Stus-List In-Hull Depth Transducer

I am purchasing a Lowrance chart plotter and depth sounder and like several others would really like to avoid another hole in the bottom. In-hull transducers will not work through a cored hull which my 35Mk3 has. Is there solid hull at or near the boats centerline? Is anyone using an in-hull

Re: Stus-List Maiden voyage

Congrats, Looks like a great sail on a nice day. Dave Saltaire CC 35 MK3 Bristol From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Burt Stratton via CnC-List Sent: Monday, August 18, 2014 6:02 PM To: cnc-list@cnc-list.com Subject: Stus-List Maiden voyage Just

Re: Stus-List remove head sink on c n c 32?

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of McElwreath, Daniel via CnC-List Sent: Sunday, July 27, 2014 12:24 PM To: cnc-list@cnc-list.com Subject: Stus-List remove head sink on c n c 32? Before going in the water this Spring I replaced all the waste hose and ran

Stus-List Play in the steering

After picking up our mooring and locking the wheel I felt something banging. I quickly found that the source was the rudder moving side to side as the boat swung on the mooring. I went down below and found that the steering cables were fairly slack and there was quite a bit of play, hence the back

Re: Stus-List Play in the steering

Thank you all for the information. You guys (and gals perhaps) are really a great resource. Dave Saltaire CC 35 MK3 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Graham Collins via CnC-List Sent: Monday, July 14, 2014 4:35 PM To: Joel Aronson; cnc-list@cnc-list.com

Re: Stus-List Martec Folding Prop

Kim, I have noticed that if I bring the boat to a complete stop in reverse and then put it in forward and accelerate that it works about 50% of the time. So, I guess I'll just deal with it this season and get it rebuilt in the fall. Thanks, Dave Saltaire, 35-3 -Original Message- From:

Re: Stus-List Folding prop horizontal vs vertical plane..

I have a Martec folding prop which when I come off the mooring operates fine. However if I slow down or stop to pick up crew at the dock something happens and it vibrates like crazy. It's got to be that one of the blades folded and the other didn't and when I accelerate it still vibrates as though

Re: Stus-List Rigging Problem

Thank you all for your suggestions. I’ll for sure check the rake and rig tension and let you folks know if that and staying out of dirty air puts us over the top. Dave From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jake Brodersen via CnC-List Sent: Saturday, June 28,

Stus-List Rigging Problem

Great wind for a Wednesday evening club race, great start, and then got smoked by three other boats one of which was another CC 35 MK3. I had just had the bottom cleaned, had plenty of boat speed but I just couldn't point as high as the others. Any suggestions on where I should start to look

Re: Stus-List Rigging Problem

the tell tales breaking evenly up and down the genoa? 6. Angle vs course. Was your angle the same as the others or were you pointed lower. If pointed the same what were the wind conditions? Were you getting pushed sideways? Dennis C. On Fri, Jun 27, 2014 at 1:27 PM, David Jacobs via CnC-List

Re: Stus-List Planning trip to S. New England- need advice from locals

Pete, About 25 minutes from Providence and on the way to Newport, stop in Bristol, RI. A fun town that is home to the Bristol Yacht Club, the Herreshoff museum and a lot of good restaurants. The museum has Bill Koch's 12 meter American in which he defended the cup and several Herreshoff

Re: Stus-List Can anyone identify the class of this boat?

99% sure that it is indeed a Cape Dory. Dave Saltaire 35 MKIII -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ronald B. Frerker via CnC-List Sent: Monday, June 02, 2014 11:54 AM To: Dennis C.; cnc-list@cnc-list.com Subject: Re: Stus-List Can anyone

Re: Stus-List Folding prop

Andy, I have a Martec and it’s the first folding prop I’ve ever had. I had been nervous about it but besides sometimes having one sometimes fold when going really slow in the harbor and having to hit reverse to spin it open, it’s been great. In reverse it’s more than adequate stopping the

Re: Stus-List Cool change and Oregon Offshore Race

Good decision. Perhaps the one thing we do benefit from getting older is wisdom. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alan Bergen via CnC-List Sent: Saturday, May 10, 2014 7:43 PM To: CC Photoalbum email list Subject: Re: Stus-List Cool change and Oregon Offshore

Re: Stus-List Now: Worst Boat Names

I always wanted to name my sailboat Airgasm and the dinghy Oargasm but sadly I could never get my wife to agree. Dave Jacobs Saltaire CC 35 Mk III From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass Sent: Friday, March 07, 2014 7:53 PM To: cnc-list@cnc-list.com

Re: Stus-List Boston

Gary, Between Quincy Bay and Boston Harbor is the Long Island Bridge which has plenty of height. Both areas are very protected by the Boston Harbor Islands, Hull a neck that connects with the south shore and Deer Island a neck attaching to Winthrop, the north end of the harbor and just

Re: Stus-List So New England retirement/harbor perspectives

Bob, My wife and I faced the exact same dilemma last year. Since I sailed out of the New Bedford YC many years ago we were looking at Padanarum/South Dartmouth on Buzzards Bay. We went to the Boston Boat Show and ran into a realtor there who put up a display. We told him what we were

Re: Stus-List So New England retirement/harbor perspectives

retirement/harbor perspectives Dave, did you really mean 55K? I want one of those!!! If that's true I'll be moving to Bristol!!! Danny -- Original Message -- From: David Jacobs davidjaco...@comcast.net To: cnc-list@cnc-list.com Subject: Re: Stus-List So New England

Re: Stus-List In hull transducer location

Joel, Is there any place on a 35 MK III, near the centerline that isn't cored and might be a good location for a in hull sensor? Dave Saltaire From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Friday, December 20, 2013 8:47 AM To:

Re: Stus-List In hull transducer location

Mojito CC 35-3 Branford, CT On Fri, Dec 20, 2013 at 9:02 AM, David Jacobs davidjaco...@comcast.net wrote: Joel, Is there any place on a 35 MK III, near the centerline that isn't cored and might be a good location for a in hull sensor? Dave Saltaire

Re: Stus-List : new boat, 1985 CC 37

Richard, I too just bought a new to me CC, a 1984 35 MK III. Interestingly, I was always a Pearson guy. My last boat was a Pearson 10M and like you and CC I was really comfortable with Pearson, thought it gave me the biggest bang for the dollar and found it hard to change. The idea of

Re: Stus-List wire halyards

for the new rigging? Tim Mojito CC 35-3 Branford, CT On Dec 4, 2013, at 3:06 PM, David Jacobs davidjaco...@comcast.net wrote: Interestingly, I was talking to people at NE Rigging Systems in Concord, MA just yesterday about replacing the rod on my 1983 CC35 MK III and they told me about

Re: Stus-List aluminium shrouds bolts

Aluminum, with its high strength to weight ratio is a terrific material for many applications. However, even the highest modulus aluminums at their highest tempers (6061-T6) will not be able to withstand years of a higher modulus material (stainless wire rope) abrading it. So, if a stainless steel

Re: Stus-List wire halyards

Interestingly, I was talking to people at NE Rigging Systems in Concord, MA just yesterday about replacing the rod on my 1983 CC35 MK III and they told me about this issue. Apparently CC changed from aluminum through bolts (through the mast holding the rod connection fittings) in the late 80's to

Re: Stus-List Question on CC 35 MKIII

Eric, I have the same boat and the hull is cored below the waterline. Dave From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Erik Hillenmeyer Sent: Tuesday, December 03, 2013 4:05 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Question on CC 35 MKIII 1984 CC