Re: Stus-List C&C Old Sails

Offer them on kijiji or craiglist… hopefully they can be repurposed for bags or .. U.V. strips. Tim Matico 33MKII From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of bushmark4--- via CnC-List Sent: November 2, 2017 1:02 PM To: cnc-list@cnc-list.com Cc: bushma...@aol.com Subje

Re: Stus-List GENCO canvas near Toronto

Genco … whether its Toronto or Mississauga, both are close to the Toronto boat show … if you can wait til 2018. http://www.torontoboatshow.com/2018/ conversely I have a sewing machine… Tim Sippel C&C 33mkii Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Ba

Re: Stus-List 1985 - CNC 33 Replacement Companionway Door

I sourced out a piece of plexi-glass and cut it myself (there is a special jigsaw blade that cuts up and down and avoids “melting” the cut .) Pretty cheap .. Tim Matico C&C 33 mk ii From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Raymond Macklin via CnC-List Sent: July 1

Re: Stus-List repacking toerails

Ran across this .. haven’t used it or anything but … http://www.marineoutfitters.ca/index.cfm?page=search&eSearch1=butyl+tape&CFID=159386617&CFTOKEN=70447718 Tim Matico 33mk ii rom: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: July 8, 2017 1:34 PM

Re: Stus-List Separation between locker and engine 33-2

I have a 33-2 my original idea was to buy a automotive cargo net and put it place to keep things in place. Never got around to it , I simply put the hatch board in place to prevent things from spilling . Tim Sippel C&C 33mkii Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

Coquina C&C 35 MK i From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim Sippel via CnC-List Sent: Monday, June 5, 2017 2:05 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Tim Sippel mailto:tim.sip...@rci.rogers.com>> Subject: Re: Stus-List 33-

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

On my 85 , it drains into the bilge , it often clogged , I cut out an access panel and found the hose was about a foot longer than necessary and had a loop in it (wtf) once cut to proper length and loop removed , no issues . Tim Sippel Matico 33Mkii From: CnC-List [mailto:cnc-list-boun...@c

Re: Stus-List 33-2 Deck organizer - Who manufactured? Parts?

Or not … https://hardware.schaefermarine.com/index.php?main_page=index&cPath=91_200 Mine say Schaffer on them , I’m sure by now they are carbon fiber and $tuff like that . Tim Sippel From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave S via CnC-List Sent: May 17, 2017

Re: Stus-List 33-2 Deck organizer - Who manufactured? Parts?

Mine say Schaffer on them , I’m sure by now they are carbon fiber and $tuff like that . Tim Sippel From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave S via CnC-List Sent: May 17, 2017 6:46 AM To: C&c Stus List Cc: Dave S Subject: Stus-List 33-2 Deck organizer - Who manuf

Re: Stus-List Anyone need/want a really big wheel?

Put a dap of nail polish on the key that will hold it in place (if you use Loctite, don’t put the wheel back on too soon , don’t ask why I know this) Tim C&C 33mkii Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Thursday, February 0

Re: Stus-List Anyone need/want a really big wheel?

I have the largest wheel useable on a 33mkii… nice to able to sit “on the rail” and steer , plus leverage is better . Try it for season. Tim C&C 33mkii Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Wednesday, February 08, 2017

Re: Stus-List buying clear vinyl for broken dodger window

at 9:50 AM, Tim Sippel via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I bought 30 gauge Vinyl from a local sail maker , depends where you live I guess . its expensive stuff but if you can get by with 36” x 54” its out there Don’t forget to sew glass behind old glass and seem rip the

Re: Stus-List buying clear vinyl for broken dodger window

at 9:50 AM, Tim Sippel via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I bought 30 gauge Vinyl from a local sail maker , depends where you live I guess . its expensive stuff but if you can get by with 36” x 54” its out there Don’t forget to sew glass behind old glass and seem rip the old

Re: Stus-List buying clear vinyl for broken dodger window

I bought 30 gauge Vinyl from a local sail maker , depends where you live I guess . its expensive stuff but if you can get by with 36” x 54” its out there Don’t forget to sew glass behind old glass and seem rip the old one outta there . If up north is Ontario near barrie… tj outdoor fabrics Ti

Re: Stus-List 33-2 original cove stripe cover

Nice read I too need to redo the stripes on my 33 mkII I have the eraser well , but can’t seem to source 3m Mylar reasonably , plus there is many tape types to choose from . seems the best on has a facing that you peel away after install. Theres gotta be a place in Toronto to get this stuff! .

Re: Stus-List WInterizing 2GM20F

In Water : Change oil Check Coolant / change if necessary Out of water Run anti-freeze though engine (capture and dispose of properly) I’m not brave enough to simply drain it ! Remove impeller and store with engine key Tim Sippel C&C 33mk ii Matico : CnC-List [mailto:cnc-list-boun...@

Re: Stus-List Looking for oil recommendation for 2GM20F

I have used rotella 15/40 on my 2gm for past 15 years (yikes) I figure the multi-grade accommodates the cold hot cold season here in Toronto . Tim Sippel C&C 33mkii , Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of tom via CnC-List Sent: Wednesday, October 12, 2016

Re: Stus-List Repainting Waterline Stripe...

I have not tried this but a friend repainted his waterline stipe and used electrical tape, apparently it follows curves etc. easily Tim C&C 33mkii Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave Godwin via CnC-List Sent: Tuesday, September 20, 2016 11:10 AM To: c

Re: Stus-List Yanmar bolt size

You may need a metric adjustable wrench ;) Tim @cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Monday, August 01, 2016 7:10 PM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Stus-List Yanmar bolt size Is there a wrench size between 13 and 14 mm? Joel -- Joel 301 541 8551

Re: Stus-List Emergency tiller & wrenches. Where? 33-2 and others

Interesting , my helm seat (33mkii) is attached by 8 sets of nuts and bolts and minimal access to port side set. (propane locker on starboard allows access, port side lid sealed at factory). Not ideal . Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David via CnC-List S

Re: Stus-List Emergency tiller & wrenches. Where? 33-2 and others

Mine is accessible in cockpit locker, and I also have the wrenches secured via electrical tape. Of course on the 33mkII the tiller range is a bit limited by the helm seat . Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave via CnC-List Sent: Monday, August 01, 2016

Re: Stus-List Plumbing Related

Yup , Binnacle for new pump and add a spare joker valve and you are at the free shipping point ! Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of robert via CnC-List Sent: Tuesday, July 26, 2016 3:29 PM To: cnc-list@cnc-list.com Cc: robert Subject: Re: Stus-List Plumbing

Re: Stus-List Throttle and shift levers

Hi Brad , On my 33 mKii shift lever goes forward for forward , pull back for reverse. I have the stainless throttle lever , but not shift lever as the curve of the stainless lever hit the pedestal guard and wouldn’t engage forward Cheers Tim Matico C&C 33mkII From: CnC-List [mailto:cnc-lis

Re: Stus-List Removing Cabin-Top Handrails

It sounds like there should be some round white “plugs” on your cabin headliner (ceiling?) , pop these out and the “nuts should be there . Tim C&C 33mkii MATICO From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Randy Stafford via CnC-List Sent: Tuesday, April 19, 2016 2:22 PM

Re: Stus-List Windows ad nauseum

I have used a propane torch , but these days I’d go with a heat gun … Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alan Liles via CnC-List Sent: Friday, March 04, 2016 11:55 AM To: cnc-list@cnc-list.com Cc: Alan Liles Subject: Re: Stus-List Windows ad nauseum I was a

Re: Stus-List Sale alert automatic inflatable harness

Don’t know if mustangs interest anyone , But they are on sale in Canada , I’m sure USD makes them a better deal) Tim Sippel C&C 33mkii Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Friday, February 19, 2016 10:20 AM To: 'cnc-list@

Re: Stus-List Made an offer on a C&C 35 mk2

I would second Peter , and while I agree with Steve’s “He didn’t tell me anything I didn’t know” (I’m guessing in reference to an insurance survey after owning the boat for a period of time) , when it comes to the initial purchase , I’d prefer to go with the “Pro” and attend if possible. IMHO

Re: Stus-List C&C 44 Custon

http://www.kijiji.ca/v-buy-sell-other/cambridge/44-c-c-custom/1103688809 is at EYC in Toronto Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron Casciato via CnC-List Sent: Tuesday, January 12, 2016 10:50 AM To: cnc-list@cnc-list.com Cc: Ron Casciato Subject: Re: Stus-L

Re: Stus-List Acoustic insulation in Canada

Isn't the magic eraser absorbant ? That can't be good in an engine compartment I was googlin' "ABYC" and "engine" but so far can't find anything specific about sound insulation (I do see that absorbent material is not welcome) Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf

Re: Stus-List Engine acoustic insulation, incl. sources in Canada?

I just bought a roll from HMP .. haven’t installed yet. Tim C&C 33 mkii. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave Syer via CnC-List Sent: Tuesday, January 05, 2016 11:21 AM To: cnc-list@cnc-list.com Cc: Dave Syer Subject: Stus-List Engine acoustic insulation, incl.

Re: Stus-List Upholsterers in the Toronto area?

I found it was worth the drive to Kitchener Cushions are going to year 10 this season ... https://www.facebook.com/FrikosUpholsteryLtd/ As an aside I took photos and measurements for all the cushions and e-mailed the document to marine, automotive and furniture upholsterers , not surprisingly

Re: Stus-List C&C trademark stripe

Hey that's practically one stop shopping , thanks Tim C&C 33mkii Matico From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jean-Francois J Rivard via CnC-List Sent: Tuesday, September 22, 2015 1:29 PM To: cnc-list@cnc-list.com Cc: Jean-Francois J Rivard Subject: Stus-List C&C trad

Re: Stus-List boat names

Or.. "Dyslectics untie, there is a dog!" Tim -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ & Melody via CnC-List Sent: Thursday, September 17, 2015 1:11 PM To: cnc-list@cnc-list.com Cc: Russ & Melody Subject: Re: Stus-List boat names Is he

Re: Stus-List boat names

Hey Joe , Combining family names is okay … Check out the cymbal manufacturer SABIAN (Sally Billy Andy ) Tim Matico 33mkii (MAxy, TIm, COle) From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Thursday, September 17, 2015 2:47 PM To: 'cnc-list@

Re: Stus-List Interior Cushions

Hi Al, This may be a bit late , but a few years I replaced all my interior cushions (actually 10 years ago) . I took photos of every cushion on the boat and put them in a word document along with the measurements for each cushion . I sent the document to every upholsterer I could find with an e-

Re: Stus-List Mast on c&c 33 MKII

Hi , My 33MKii has a mast made by C&C . The spin car rides on U shaped channels about 5" long (the slides are internal to the mast) . I purchased replacements from South shore yachts and cut them to size , relatively inexpensive , but that was about 6 years ago . Tim C&C 33MKII Matico . Fr

Re: Stus-List rig tuning

Hmm cheap out I was just eying up a roll of velcro I have here … Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Tuesday, April 28, 2015 2:28 PM To: Tim Goodyear; cnc-list@cnc-list.com Subject: Re: Stus-List rig tuning I've seen people chea

Re: Stus-List Autohelm and raymarine

I’ll jump in with a question/request: I have a 4000 mkII that works fine , but the screen is dead , anybody upgrading ..I ‘d be interested in the display/brain . Tim C&C 33mkII Matico Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-lis

Re: Stus-List Annapolis/Newport race

Depends on how fast you go .. ;) Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Tuesday, December 16, 2014 11:39 AM To: bushma...@aol.com; cnc-list@cnc-list.com Subject: Re: Stus-List Annapolis/Newport race How long does a race like that

Re: Stus-List West Marine leaves Canada

Always check binnacle.ca Tim C&C 33mkii Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan Plavsa via CnC-List Sent: Monday, November 10, 2014 1:40 PM To: Steve Thomas; cnc-list@cnc-list.com Subject: Re: Stu

Re: Stus-List Running Lights >Approved LED bulbs

I agree, White all around mast head light is Anchor . Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of wwadjo...@aol.com via CnC-List Sent: Thursday, November 06, 2014 11:16 AM To: Josh Muckley via CnC-List Subject: Re: Stus-List Running Lights >Approved LED bulbs I mus

Re: Stus-List Valuing old Sails for Donation

om] On Behalf Of Joel Aronson via CnC-List Sent: Thursday, October 23, 2014 1:59 PM To: Tim Sippel; cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Subject: Re: Stus-List Valuing old Sails for Donation Or Bacon? On Thu, Oct 23, 2014 at 9:43 AM, Tim Sippel via CnC-List mailto:cnc-list@

Re: Stus-List Awesome weekend coming - cruise alert!

This weekend is the cruise from Crane to cradle... hope the weathers good just the same. Tim Toronto -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Thursday, October 23, 2014 10:49 AM To: OldSteveH; cnc-list@cnc-li

Re: Stus-List Valuing old Sails for Donation

Why not try a used sail dealer http://www.secondwindsails.com/(first hit on google)see what they would sell a sail in similar size/condition and go from there ? Tim C&C 33Mkii Toronto -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd

Re: Stus-List Farley Mowat and thanks

Never cry wolf !! Tim Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Richard N. Bush via CnC-List Sent: Friday, October 17, 2014 9:32 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Farley Mowat and thanks

Re: Stus-List sailing this weekend

*sigh* With any luck we won’t get rained on as we unstep another 80+ masts Saturday and Sunday Tim C&C 33MKII Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Thursday, October

Re: Stus-List rebed through-hulls

Sinkaflex … wait for it …. Tim Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Wednesday, October 15, 2014 11:53 AM To: Marek Dziedzic; cnc-list@cnc-list.com Subject: Re: Stus-Lis

Re: Stus-List Engine Sound Insulation - Go Without an engine?

I call that the J.C.F. line… Tim \ Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Thursday, August 28, 2014 1:57 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Engine Sound

Re: Stus-List Engine Sound Insulation - Go Without an engine?

Hi Steve … Come to EYC and practice on the Visitor pump-out dock ;) Tim 33MKII Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan Plavsa via CnC-List Sent: Thursday, August 28, 2014 1:26 PM To: cnc-list@cnc-

Re: Stus-List Was now docking ...now getting busy

A need to set up another RESP ? Tim Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Gallagher via CnC-List Sent: Thursday, August 28, 2014 12:17 PM To: cnc-list@cnc-list.com Subject: Stus-List Was now docking

Re: Stus-List A tribute to Doyle Sail Loft

Tequila makes my Keel fall off. Tim Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Pennie via CnC-List Sent: Thursday, August 21, 2014 9:00 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List A tribute to Doy

Re: Stus-List Joker valve war / Head reliability

I agree with replacing the pump assembly. I “upgraded” the Jabsco head to a twist lock, rebuild kit was 69.99, complete assembly was 79.00… order a spare Joker as well Four screws a gear clamp and you’re done. No messing around with crusty gaskets and rubber. http://ca.binnacle.com/p6899/ITT-TWIS

Re: Stus-List A real life "All is Lost"

Umm seriously would anyone pay 4 grand for the privilege to fish this out of the water ? Tim C&C 33MKII Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Michael Brown via CnC-List Sent: Thursday, July 17, 2014 12:

Re: Stus-List Repositioning Mast - now compass oil

I don't know if its "light mineral oil " but I use mineral oil (bought from shoppers drug mart or no frills) To clean and season my wooden cutting blocks . Sewing machine oil , I have purchased large quantities of that from the Local singer outlet. Tim Sippel > Toronto

Re: Stus-List Repositioning Mast - now compass oil

Do you need a Beef Hook ? Tim > Toronto From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Bina - gmail via CnC-List Sent: Thursday, June 05, 2014 1:50 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Repositioning Ma