Waxed the hull last year. Thinking of going to Poli-Glow. I am told this is
difficult. Comments? Opinions? Experiences?
John McLaughlin
C&C29 Mark II
"Falcon"
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List
I've been using Nu-Finish on all my stuff for years. Easy to apply, I only use
a buffer on the big boat 'cause my arm gets tired. Advertised as once a year on
cars, seems to do the trick for me.
Dan Sheer
Pegathy LF38 on Rock Creek off the Patapsco
___
The first year, it is a bit of a job. You will need to remove all old
wax and other contaminants embedded in the gelcoat. The gelcoat must be
completely free of old wax, and especially any traces of old compound
that have been rubbed into the surface. Poli-Glow will not adhere to old
residues f
Agree with Bill, it's easy and it looks good. Last year I stripped the hull
down to bare gelcoat again and built up 8-10 layers of Poli Glow. It was
still easier than wax/buff. The average year is a walk in the park.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 1 April 2014 07:40, Bill
d it looks.
Gary
- Original Message -
From: johnr...@aol.com
To: cnc-list@cnc-list.com
Sent: Tuesday, April 01, 2014 10:21 AM
Subject: Stus-List Poli-Glow
Waxed the hull last year. Thinking of going to Poli-Glow. I am told this is
difficult. Comments? Opinions? Experiences?
-list@cnc-list.com
Sent: Tuesday, April 01, 2014 10:21 AM
Subject: Stus-List Poli-Glow
Waxed the hull last year. Thinking of going to Poli-Glow. I am told this is
difficult. Comments? Opinions? Experiences?
John McLaughlin
C&C29 Mark II
&qu
t Cnc-List
Subject: Re: Stus-List Poli-Glow
For the last 16 years with INDIGO I've been using soap and water and, after
it's dry, a coat or two of Turtle Wax. Lasts all summer and looks just fine.
The flag blue AwlGrip is now about 22 years old, has a couple of scratches
but still
Just got my delivery of Aurora Boat Wash, Boat scrub, Black Steak
Remover and Boat Shine. I have used Boat Shine for many years. Last
year couldn't find it locally so I went with Maguirs. I am ready to go
back. Easy to use and looks great all year. I am using it over 30 year
old Imron.
N
good
compliments on the shine.
Jake
Jake Brodersen
"Midnight Mistress"
C&C 35 Mk-III
Hampton Va
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
johnr...@aol.com
Sent: Tuesday, April 01, 2014 10:22 AM
To: cnc-list@cnc-list.com
Subject: Stus-List
lto:cnc-list-boun...@cnc-list.com] *On Behalf Of *
> johnr...@aol.com
> *Sent:* Tuesday, April 01, 2014 10:22 AM
> *To:* cnc-list@cnc-list.com
> *Subject:* Stus-List Poli-Glow
>
>
>
> Waxed the hull last year. Thinking of going to Poli-Glow. I am told this
> is difficult. Com
correct me if i'm wrong but I believe Awlgrip and Imron advise against wax of
any kind
Lee
Maggie-Lee
1987 C+C 35-3 c/b
-Original Message-
From: Jim Watts
To: 1 CnC List
Sent: Tue, Apr 1, 2014 9:14 pm
Subject: Re: Stus-List Poli-Glow
For those folks who have painted hull
ggie-Lee
> 1987 C+C 35-3 c/b
> -Original Message-
> From: Jim Watts
> To: 1 CnC List
> Sent: Tue, Apr 1, 2014 9:14 pm
> Subject: Re: Stus-List Poli-Glow
>
> For those folks who have painted hulls who exclaim that they only have
> to wax them...we're not
Subject: Re: Stus-List Poli-Glow
correct me if i'm wrong but I believe Awlgrip and Imron advise against wax
of any kind
Lee
Maggie-Lee
1987 C+C 35-3 c/b
-Original Message-
From: Jim Watts
To: 1 CnC List
Sent: Tue, Apr 1, 2014 9:14 pm
Subject: Re: Stus-List Poli-Glow
For those
good
>> compliments on the shine.
>>
>>
>>
>> Jake
>>
>>
>>
>> Jake Brodersen
>>
>> “Midnight Mistress”
>>
>> C&C 35 Mk-III
>>
>> Hampton Va
>>
>>
>>
>>
>>
>&
I realize you are joking, but for the
benefit of those not familiar with Poly-Glow, it is water based
and has no appreciable fumes, intoxicating or otherwise. :-)
Bill Bina
On 4/2/2014 1:17 AM, Rich Knowles wrote:
Mebbe you'
Well that sounds boring:)
Rich
> On Apr 2, 2014, at 6:58, Bill Bina wrote:
>
> I realize you are joking, but for the benefit of those not familiar with
> Poly-Glow, it is water based and has no appreciable fumes, intoxicating or
> otherwise. :-)
>
> Bill Bina
>
>> On 4/2/2014 1:17 AM, Ric
Not realizing that my new boat had Awlgrip, I put Poli-glow on it last spring before launching. It looked great (as usual) so I have no idea why it is “not recommended”. Dave
David KnechtAries1990 C&C 34+New London, CT
___
This List is provided by the
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David
Knecht
Sent: April 2, 2014 10:57 AM
To: CnC CnC discussion list
Subject: Re: Stus-List Poli-Glow
Not realizing that my new boat had Awlgrip, I put Poli-glow on it last
spring before launching. It looked great (as usual
Poly Glow depends on the slight porosity of aged gelcoat for proper
adhesion. It is not advised for brand new boats for the same reason.
They are too slick for it to stick.
Bill Bina
On 4/2/2014 9:56 AM, David Knecht wrote:
Not realizing that my new boat had Awlgrip, I put Poli-glow on it last
dings
From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of David Knecht
Sent: April 2, 2014 10:57 AM
To: CnC CnC discussion list
Subject: Re: Stus-List Poli-Glow
Not realizing that my new
boat had Awlgrip, I put Poli-glow on it last spring before launching. It
looked great (as usual
But it does go well with rum.
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
On Apr 2, 2014, at 7:02 AM, Rich Knowles wrote:
> Well that sounds boring:)
>
> Rich
>
> On Apr 2, 2014, at 6:58, Bill Bina wrote:
>
>> I realize you are joking,
Everything is good with rum.
Rich
> On Apr 2, 2014, at 11:57, Frederick G Street wrote:
>
> But it does go well with rum.
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
>
>> On Apr 2, 2014, at 7:02 AM, Rich Knowles wrote:
>>
>> Well
is really easy to apply as
>> well…should least 20+years at least barring scratches and dings
>>
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David
>> Knecht
>> Sent: April 2, 2014 10:57 AM
>> To: CnC CnC discussion list
>> Subj
only next option was to re-gel
coat the boat.
We have old Antique boats that oxidize with time and one day or another you
will need to re-paint your boat.
Andy
C&C 25-1
From: capt...@gmail.com
Date: Wed, 2 Apr 2014 11:40:20 -0500
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Poli-Glo
boats that oxidize with time and one day or another you
> will need to re-paint your boat.
>
> Andy
>
> C&C 25-1
>
> From: capt...@gmail.com
> Date: Wed, 2 Apr 2014 11:40:20 -0500
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Poli-Glow
>
> Which why
Sorry, but that is simply a misdiagnosis. Poli Glow is not a "quick fix"
any more than waxing is a quick fix. Your "professionals" first
unprofessional move was to try and sand off the Poly Glow without
knowing what it was. I would not be at all surprised if in their
ignorance they ruined your
is pretty
nasty stuff.
Gary
- Original Message -
From: David Knecht
To: CnC CnC discussion list
Sent: Wednesday, April 02, 2014 2:10 PM
Subject: Re: Stus-List Poli-Glow
I guess I don’t agree because
#1- the topsides looked great after I Poli-glowed them last spring (in
years.it's
your choice but if you already have an Awl gripped hull keep it that way,
poly whatever won't help
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David
Knecht
Sent: April 2, 2014 11:11 AM
To: CnC CnC discussion list
Subject: Re: Stus-List Poli-Glow
> re-gel coat the boat.
>
> We have old Antique boats that oxidize with time and one day or another you
> will need to re-paint your boat.
>
> Andy
>
> C&C 25-1
>
> From: capt...@gmail.com
> Date: Wed, 2 Apr 2014 11:40:20 -0500
> To: cnc-list@
From: capt...@gmail.com
Date: Wed, 2 Apr 2014 11:40:20 -0500
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Poli-Glow
Which why I chose to paint Touché with Awlcraft
rather
makes it worth while.
Gary
30-1
1980
- Original Message -
From: Dr. Mark Bodnar
To: cnc-list@cnc-list.com
Sent: Thursday, April 03, 2014 12:15 PM
Subject: Re: Stus-List Poli-Glow
Seems this topic raises some divergent opinions.
I'm pretty sure my CS 30 is just ori
cnc-list@cnc-list.com
> *Sent:* Thursday, April 03, 2014 12:15 PM
> *Subject:* Re: Stus-List Poli-Glow
>
>
> Seems this topic raises some divergent opinions.
>
> I'm pretty sure my CS 30 is just original gel coat - so I was planning on
> starting some type of hull upkeep.
> Th
n out the only next option was
to re-gel coat the boat.
We have old Antique boats that oxidize with time and one day or another you
will need to re-paint your boat.
Andy
C&C 25-1
_
From: capt...@gmail.com
Date: Wed, 2 Apr 2014 11:40:20 -0500
To: cnc-list@cnc-list
the boat
in the condition it was in and it turn out the only next option was to re-gel
coat the boat. We have old Antique boats that oxidize with time and one
day or another you will need to re-paint your boat. Andy C&C 25-1
From: capt...@gmail.com
Date: Wed, 2 Apr 2014 11:40:20 -0500
Got a Poli-Glow question.
I didn't apply Poli-Glow on the hull for two years and recently noticed some
peeling. I hope to try using Poli-Strip but thought I'd ask the group for
tips. Is there any temperature minimum?
Chuck Scheaffer, Resolute 1989 C&C 34R, Annapolis
Thanks to all of the subs
r a collision. It was an
>> insurance job so I was looking at having the repairs done by a
>> professional. When they started to sand down the the damage area the sand-
>> paper was gumming and they didn't understand why. I told them that I used
>> Poli-Glow and they think that it
d and shiny
every season?
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
Sent: April 3, 2014 2:37 PM
To: CnClist
Subject: Re: Stus-List Poli-Glow - alternatives
While I don't disagree with this guy's process, I do question his use of
more ab
do now to keep it good and shiny
> every season?
>
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
> Sent: April 3, 2014 2:37 PM
> To: CnClist
> Subject: Re: Stus-List Poli-Glow - alternatives
>
> While I don't disagree with this
38 matches
Mail list logo
