Frederic Soulier [EMAIL PROTECTED] writes:
2) Printer Configuration (Epson Stylus Photo 870, USB)
I tried to print a test page bit got nothing at all
The following command was issued (Ctrl-Alt-F3)
* running: /usr/bin/foomatic-printjob -s cups -P ep870_cooker_
Hi
1) Installing with Grub on a dedicated /boot partition does not work
(cannot boot)
Installing with Lilo (graphical) on the same dedicated /boot works
perfectly fine
2) Supermount is sloo.
plus every ~5s it feels the need to access the floppy drive...
also only
On Sat 16 Aug 2003 05:23, Frederic Soulier posted as excerpted below:
3) Missing KDE programs (eg Konsole)
Konsole was just split off of kdebase. It's now a separate package,
kdebase-konsole, or some such. I think it should still be installed by
default, but either it isn't tweaked to do so
On Saturday 16 August 2003 22.38, Duncan wrote:
On Sat 16 Aug 2003 05:23, Frederic Soulier posted as excerpted below:
3) Missing KDE programs (eg Konsole)
Konsole was just split off of kdebase. It's now a separate package,
kdebase-konsole, or some such. I think it should still be installed
On Sat, 2003-08-16 at 22:21, guran wrote:
On Saturday 16 August 2003 22.38, Duncan wrote:
On Sat 16 Aug 2003 05:23, Frederic Soulier posted as excerpted below:
3) Missing KDE programs (eg Konsole)
Konsole was just split off of kdebase. It's now a separate package,
kdebase-konsole, or
Hi
1) There was an error installing packages
gatos-0.0.6-2001016-11mdk
Isn't this one in contrib normally?
2) Printer Configuration (Epson Stylus Photo 870, USB)
I tried to print a test page bit got nothing at all
The following command was issued (Ctrl-Alt-F3)
* running:
Hi
Installing Grub on dedicated boot partition /dev/hde1 (I have xosl on a
dedicated FAT16 partition on /dev/hda1 which I use to choose which OS to
boot). I'm then presented with a screen asking me from which drive I'm
booting. I don't understand the purpose of this screen... I've already
Frederic Soulier [EMAIL PROTECTED] writes:
Hi
Installing Grub on dedicated boot partition /dev/hde1 (I have xosl on a
dedicated FAT16 partition on /dev/hda1 which I use to choose which OS to
boot). I'm then presented with a screen asking me from which drive I'm
booting. I don't understand
Adam Williamson wrote:
Hi there, just thought i'd report on my experiences installing Cooker in
case it's of any use to anyone. Decided to do so because my 8.2
installation was a bit messed up (my fault) and i'd installed quite a
lot of stuff from Cooker on it anyway. I did this all yesterday
Hi all,
I just upload and upgrade Cooker package of 10/01/00. For the bug i list
previously:
Resolved:
2/ X seems to never fade the screen
3/ Sawfish : downgrade to librep-0.12.4
9/ kudzu work with aurora
Not yet resolved:
4/ Linuxconf have diseappear from DrakConf but is always buggy.
5/
Hello experts
fmirror - ftp.sunet.se -2000-09-30-2300 CET
I have written twice to Archie at sunet and complained about double and
missing packages. His answer was that he was running 149+MB/s into a 150
MB/s line - so he was stressed to comply with that priorety.
only two packages was
guran remberg wrote:
guran remberg wrote:
Hello experts
fmirror - ftp.sunet.se -2000-09-30-2300 CET
I have written twice to Archie at sunet and complained about double and
missing packages. His answer was that he was running 149+MB/s into a 150
MB/s line - so he was stressed to
Olivier Dugeon [EMAIL PROTECTED] writes:
[...]
9/ Kudzu is not compatible with Aurora. When i remove my cdrom, kudzu
detect it, but it can't open a screen and output characters to aurora
and failed after the timeout.
fixed now
[...]
11/ My laptop doesn't power down when i shutdown. Need
Olivier Dugeon [EMAIL PROTECTED] writes:
4/ LinuxConf doesn't start from DrakConf. Process are here, but no
window comes. It start normally from an xterm, but crash if i select
"networking" then on the new window if i select another setting. The
error is :
"Error message from remadmin : X
Chmouel Boudjnah wrote:
6/ I have some pb to configure my soundcard. Harddrake detect it has an
magic media 256 av (this is true). Hardrake try to install the nm256
module, but it failed with the traditionnal ressource or device busy.
Sndconfig detect it too and say that it doesn't
Olivier Dugeon [EMAIL PROTECTED] writes:
What is the output of your lspcidrake ? Jeff currentrly work on a
fix of this driver. What kind of laptop you have (VAIO/Dell Latitude ?)
This is the output of lspcidrake. My laptop is an HP OmniBook 4150.
Intel Corporation|440BX/ZX - 82443BX/ZX
Chmouel Boudjnah wrote:
is the /etc/modules.conf do an alias from sound to nm256 driver ?
Could you send to pixel your /proc/bus/pci/devices ?
Currently i use my sound card in WSS emulation mode. this is my
modules.conf sound related stuff :
pre-install sound insmod sound dmabuf=1
alias
Olivier Dugeon [EMAIL PROTECTED] writes:
Chmouel Boudjnah wrote:
is the /etc/modules.conf do an alias from sound to nm256 driver ?
Could you send to pixel your /proc/bus/pci/devices ?
Jeff do you have an idea abou that ?
Currently i use my sound card in WSS emulation mode. this is my
[EMAIL PROTECTED] (Olivier Dugeon) writes:
12/ Why KDE need lestiff ???
For Konqueror to be able to read the Netscape plugins.
Why lestif instead of openmotif ?
Lesstif is really free software (under LGPL)
but OpenMotif is not event compliant with Open Source definition..
--
[EMAIL PROTECTED] (Olivier Dugeon) writes:
3/ Sawfish crash with the Xinerama error for me too
Xinerama error is just a warning and doesn't crash sawfish..
Check you are using librep 0.12.4-4mdk and not librep-0.13-1mdk
--
Frédéric Crozat
MandrakeSoft
Olivier Dugeon [EMAIL PROTECTED] writes:
Chmouel Boudjnah wrote:
is the /etc/modules.conf do an alias from sound to nm256 driver ?
Could you send to pixel your /proc/bus/pci/devices ?
Jeff do you have an idea abou that ?
Currently i use my sound card in WSS emulation mode.
Hi all,
This my report after a fresh install in pcmcia+nfs mode of cooker
(package of 27/09) and update (package of 28/9) on an HP 4150 laptop.
First impressions
-
GREAT, I'm very glad to see how the linux-mandrake distro has been
improved :
wheel mouse detect and configured,
cooker - ftp.sunet.se - 2000-09-20-1500-CET
package error:
XFree86-libs-4.0.1-5mdk,ncurses-5.1-5mdk
sysklogd-1.3.33-5mdk
pam-0.72-8mdk
kernel-2.2.17-8mdk
- then I bailed out.
"Installer algoritm"
If there is graphic cards in the market that is not fully supported by
XFree86 - then I think
guran remberg [EMAIL PROTECTED] writes:
If there is graphic cards in the market that is not fully supported by
XFree86 - then I think that the installer 'must' be able to backtrack
and leave a clean machine to the user and inform him on how and where he
may perform a manual install.
i think
24 matches
Mail list logo
