Pedro Rosa <[EMAIL PROTECTED]> writes:
> The new rpm fails building on some variables related to agp. Right
> now, I can't state which ones exactly, but they seem to be
> agp_drm_init agp_drm_uninit.
>
> I'm compiling the stuff under kernel 2.4.0-0.2, gcc 2.96 and glibc 2.2
>
which version of
The new rpm fails building on some variables related to agp. Right now,
I can't state which ones exactly, but they seem to be agp_drm_init
agp_drm_uninit.
I'm compiling the stuff under kernel 2.4.0-0.2, gcc 2.96 and glibc 2.2
Ektanoor
Mandrake 7.2 Odissey
Upgraded with cooker: XFree86-4.0.1-28mdk.i586.rpm
Do not work.
Upgraded with ftp://devel.mandrakesoft.com/pub/people/flepied/XFree86-test/
Now, (with 4.01E), I can start the X server, but not with 800x480
(II) NEOMAGIC(0): Clock range: 11.00 to 90.00 MHz
(II) NEOMAGIC(0):
On Fri, 06 Oct 2000, Francois Pons wrote:
> Ed Wilts <[EMAIL PROTECTED]> writes:
> > The XFree on the beta 3 CD contains a bug in configuring the SiS 6326
> > card. It's set for no_accel, when in fact acceleration has been supported
> > since XFree 4.0 first came out. I reported this a long time
Ed Wilts wrote:
> The XFree on the beta 3 CD contains a bug in configuring the SiS 6326 card.
I wouldn't call that a bug. Your mileage varies *enormously* in getting hardware
acceleration to go on the 6326 cards, even identical cards with consecutive
serial numbers. Without accel, everything is p
Ed Wilts <[EMAIL PROTECTED]> writes:
> The XFree on the beta 3 CD contains a bug in configuring the SiS 6326 card.
> It's set for no_accel, when in fact acceleration has been supported since
> XFree 4.0 first came out. I reported this a long time ago, but it apparently
> did not get fixed.
The XFree on the beta 3 CD contains a bug in configuring the SiS 6326 card.
It's set for no_accel, when in fact acceleration has been supported since
XFree 4.0 first came out. I reported this a long time ago, but it apparently
did not get fixed. When I corrupted my system earlier this week a
Hi
I don't know if this is the place to ask this question, but anyway here it
goes:
Does anyone know how, do I configure XFree 4 to work in 1024x768 interlaced
on an ATI properly. The closest I've come was that my cursor and all edges
flickered. Any ideas?
SHadowX
[EMAIL PROTECTED] writes:
> I installed the latest beta on my laptop - pcmcia startup problem now
> fixed;many thanks guys. My next problem is that X will not start
> correctly. Looks like a problem wth the config built by XFdrake. Attached
> is the Xfree log & config files,
Can you test usin
You don't have to go back to 3.3.6, just comment the
"DisableVidModeExtension" line in the "ServerFlags"
section of your "/etc/X11/XF86Config-4"
...
Section "ServerFlags"
# Option "DisableVidModeExtension"
Option "blank time"
Option "standby time" "20"
Option
Pedro Rosa <[EMAIL PROTECTED]> writes:
> On 17th build glide_driver.c points to . However, glide
> includes are usually present on /usr/include/glide. To build this
> package it is needed to move all *.h files to /usr/include (or correct
> the #include entries on 8-9 files). This is bad because t
Ray Carlino wrote:
>
> How can I change back to xfree 3.3?
> I tried running xconfigurator but it locks the comouter up when it runs the
> test.
> Vmware full screen is not supported with 4.0
? For Win98 SE it works on a Asus TNT2 under 2.2.17... VMWare 2.0.2
>
> Ray
>How can I change back to xfree 3.3?>I tried running xconfigurator but it locks the
>comouter up when it runs the
>test.
>Vmware full screen is not supported with 4.0
>
>Ray
>
why don't you use XFDrake. It is probably beter and if it doesn't work you can nag
pixel.
_
Ray Carlino a écrit :
>
> How can I change back to xfree 3.3?
> I tried running xconfigurator but it locks the comouter up when it runs the
> test.
> Vmware full screen is not supported with 4.0
Just change the symlink /etc/X11/X to the correct XFree server in
/usr/X11R6/bin.
Of course, make sure
How can I change back to xfree 3.3?
I tried running xconfigurator but it locks the comouter up when it runs the
test.
Vmware full screen is not supported with 4.0
Ray
> To my knowledge fredl builds Xfree with Glide*devel stuff, no more no
> less..
? I didn't get your point. Are you remarking 3Dfx's Glide rpms? There
they usually install their stuff into /usr/local/glide/include. You
usually use /usr/include/glide, which is much more correct for your
architectu
On 17th build glide_driver.c points to . However, glide
includes are usually present on /usr/include/glide. To build this
package it is needed to move all *.h files to /usr/include (or correct
the #include entries on 8-9 files). This is bad because there is also a
series of *.h files for glide 3 t
I installed the latest beta on my laptop - pcmcia startup problem now
fixed;many thanks guys. My next problem is that X will not start
correctly. Looks like a problem wth the config built by XFdrake. Attached
is the Xfree log & config files,
(See attached file: XF86Config-4)(See attached file:
On Tue, Aug 08, 2000 at 02:15:31PM -0400, Pixel wrote:
> > > Option "power_saver"
> > >
> > > enough?
> >
> > I don't know. I've never met the "power_saver" option before seeing it in
> > the Mandrake auto generated config file. I just assume its no longer valid for
> > XFree86 4.
>
> ok, i sw
Antony Suter <[EMAIL PROTECTED]> writes:
> > Option "power_saver"
> >
> > enough?
>
> I don't know. I've never met the "power_saver" option before seeing it in
> the Mandrake auto generated config file. I just assume its no longer valid for
> XFree86 4.
ok, i switch to "DPMS" option. I had fou
Pixel wrote:
>
> Antony Suter <[EMAIL PROTECTED]> writes:
>
> > > Now that I'm using XFree 4.0 (latest from cooker) it no longer powers
> > > off my monitor anymore. I have always had it set to power off my
> > > monitor 5 minutes after the screensaver came on and now it doesn't do
> > > it any
On Tue, Aug 08, 2000 at 11:16:07PM +1000, Antony Suter wrote:
> > Now that I'm using XFree 4.0 (latest from cooker) it no longer powers
> > off my monitor anymore. I have always had it set to power off my
> > monitor 5 minutes after the screensaver came on and now it doesn't do
> > it anymore.
>
On Tue, Aug 08, 2000 at 01:12:14PM -0400, Pixel wrote:
> > > Now that I'm using XFree 4.0 (latest from cooker) it no longer powers
> > > off my monitor anymore. I have always had it set to power off my
> > > monitor 5 minutes after the screensaver came on and now it doesn't do
> > > it anymore.
Antony Suter <[EMAIL PROTECTED]> writes:
> > Now that I'm using XFree 4.0 (latest from cooker) it no longer powers
> > off my monitor anymore. I have always had it set to power off my
> > monitor 5 minutes after the screensaver came on and now it doesn't do
> > it anymore.
[...]
> Check for:-
Vincent Danen wrote:
>
> Now that I'm using XFree 4.0 (latest from cooker) it no longer powers
> off my monitor anymore. I have always had it set to power off my
> monitor 5 minutes after the screensaver came on and now it doesn't do
> it anymore.
>
> Does anyone else have this problem and/or k
Now that I'm using XFree 4.0 (latest from cooker) it no longer powers
off my monitor anymore. I have always had it set to power off my
monitor 5 minutes after the screensaver came on and now it doesn't do
it anymore.
Does anyone else have this problem and/or know how to fix it?
--
[EMAIL PROTE
>
> According to the XFree 4.0 documentation, the SiS 6326 is supported with
> acceleration. A base XFree -configure generates a config file with
> acceleration turned on. However, drakxconf from
> drakxtools-1.1.3-1mdk.i586.rpm turns acceleration off. It also comments out
> the line res
According to the XFree 4.0 documentation, the SiS 6326 is supported with
acceleration. A base XFree -configure generates a config file with
acceleration turned on. However, drakxconf from
drakxtools-1.1.3-1mdk.i586.rpm turns acceleration off. It also comments out
the line restricting memo
Lorne Shantz wrote:
>
> Randy Welch wrote:
>
> > So did you have an invisible cursor? Or is this a curse only found on
> > the 16M cards?
> >
> > (Ctrl-Alt + or -) rotates through the display resolutions).
> >
> No invisible cursor, but I was unable to rotate through the displays. ??
> I got 16
Randy Welch wrote:
> So did you have an invisible cursor? Or is this a curse only found on
> the 16M cards?
>
> (Ctrl-Alt + or -) rotates through the display resolutions).
>
No invisible cursor, but I was unable to rotate through the displays. ??
I got 1600x1200 and the only way I got past it
Submitted 30-May-00 by Anton Graham:
| Submitted 30-May-00 by Pixel:
| | "B. K. Barley" <[EMAIL PROTECTED]> writes:
| |
| | > Yes,
| | >
| | > I get this problem also. But I assume it's because the ldconfig is not run
| | > and it is not loading the dri module in the xf86config-4 file. Pixel
Submitted 30-May-00 by Pixel:
| "B. K. Barley" <[EMAIL PROTECTED]> writes:
|
| > Yes,
| >
| > I get this problem also. But I assume it's because the ldconfig is not run
| > and it is not loading the dri module in the xf86config-4 file. Pixel, is it
| > possible to get the xconfig file upda
| AG wrote:
|
| > On Tue, 30 May 2000, B. K. Barley wrote:
| >
| > | Yes,
| > |
| > | I get this problem also. But I assume it's because the ldconfig is not run
| > | and it is not loading the dri module in the xf86config-4 file. Pixel, is it
| > | possible to get the xconfig file update
"B. K. Barley" <[EMAIL PROTECTED]> writes:
> Yes,
>
> I get this problem also. But I assume it's because the ldconfig is not run
> and it is not loading the dri module in the xf86config-4 file. Pixel, is it
> possible to get the xconfig file updated so it will work on Vodoo3 3000
> cards
nitor. I installed the fb
kernel.
B. K. Barley
-Original Message-
From: Lorne Shantz [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 30, 2000 2:50 PM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] XFree 4.0 and DPMS and USB happiness
How ironic. I have the exact same set up as you do! 32mb of r
Lorne Shantz wrote:
>
> How ironic. I have the exact same set up as you do! 32mb of ram but only
> a single head setup. I found that even though I selected 1024x768 I got
> 1600x1200. It took me awhile to figure out how to lower the resolution,
> since none of the old utilities for changing resol
How ironic. I have the exact same set up as you do! 32mb of ram but only
a single head setup. I found that even though I selected 1024x768 I got
1600x1200. It took me awhile to figure out how to lower the resolution,
since none of the old utilities for changing resolution work yet. But it
seems a
Does it actually work?
I can't seem to get it to do anything with my Matrox G400 and Viewsonic
PS790.
(3.3.6 seems to work or at least under Mandrake 7.0)
On another front I am happy that USB seems to work. I can get photos
off my Kodak DC290 camera with ks. I can skip using the wife/kids
Win
I'm not exactly sure what is wrong but with the current mirror using
fmirror my system locks up. That is just the display. Most likely it is
the apm but maybe xfree.
I'm not ever sure were to look for problems but if somebody will point
me in the right direction I'll look. Also how do you know w
You can get the Glide SDK from www.3dfx.com...
-Chris
On Fri, 19 May 2000, you wrote:
> I like to rebuild XFree-4.0 by my self.
> When I do a rpm --rebuild on the XFree86-4.0-6mdk.src.rpm I get
> error: failed build dependencies:
> Glide_SDK is needed by XFree86-4.0-6mdk
>
> I can't find Gid
I like to rebuild XFree-4.0 by my self.
When I do a rpm --rebuild on the XFree86-4.0-6mdk.src.rpm I get
error: failed build dependencies:
Glide_SDK is needed by XFree86-4.0-6mdk
I can't find Gide_SDK anywhere but someone here mus have built XFree86-4
as a src.rpm so can someone point me to Gli
I like to reebuild the Xfree-4 rpm by my self but it asks for Glide_SDK
and I can't find it anywhere. (not in contrib where I found
XFree86-4.0-6mdk.src.rpm or in the cooker dir)
Does anyone know where to find Glide_SDK ?
/M
David Aspinall <[EMAIL PROTECTED]> writes:
> Sorry, I know you really don't want to rebuild it... but perhaps we
> could have some of the documentation available for 4.0 in a package
> somewhere? (e.g. server man pages, etc. I couldn't find it anywhere).
>
All the remaining 4.0 packages are in
Sorry, I know you really don't want to rebuild it... but perhaps we
could have some of the documentation available for 4.0 in a package
somewhere? (e.g. server man pages, etc. I couldn't find it anywhere).
Allen Bolderoff <[EMAIL PROTECTED]> writes:
> I am running
> XFree86-devel-4.0-6mdk
>
> on a 7.0 box, and this is what my top looks like
>
> PID USER PRI NI SIZE RSS SHARE STAT LIB %CPU %MEM TIME COMMAND
> 27746 root 6 0 255M 255M 2660 R 0 1.3 67.4 0:25 X
> 27784
I am running
XFree86-devel-4.0-6mdk
on a 7.0 box, and this is what my top looks like
PID USER PRI NI SIZE RSS SHARE STAT LIB %CPU %MEM TIME COMMAND
27746 root 6 0 255M 255M 2660 R 0 1.3 67.4 0:25 X
27784 allen 0 0 24996 24M 7688 S 0 0.0 6.4 0:
niche <[EMAIL PROTECTED]> writes:
> I installed xfree 4.
> But i can't still run Quake 3
> I'm asking how to use the nvidia drivers provided by nvidia themselves
> how to run a x server with those drivers.
seems like you need an older kernel to succeed to compile those drivers (which
have a real
I installed xfree 4.
But i can't still run Quake 3
I'm asking how to use the nvidia drivers provided by nvidia themselves
how to run a x server with those drivers.
Thank you to answer...
de Wergifosse Nicolas
http://www.chez.com/ndw
I got some more info on this today. It appers that using XFree-3.3.6 on
Mandrake 6.1 works fine, so my guess is that it is indeed a glibc-2.1.2
problem. After even more tweaking the cow-orker still cannot get it to
work...he is quite intimate with modelines now :)
John Cavan wrote:
>
> I don't t
I don't think it is limited to the S3 Trio3D though, I ran into a
similar problem with the SVGA server and the Voodoo3 card. It absolutely
refused to accept my modelines no matter what I did. I'm currently using
the 3.3.5 modified SVGA server from 3dfx.
John
Steve Fox wrote:
>
> I was having tr
I was having trouble with XFree86-3.3.6 working with my S3 Trio3D
chipset at work. 3.3.5 worked after using a special XF86Config file
(neither Xconfigurator nor XF86Setup generate the proper modelines for
my IBM P200 monitor), but 3.3.6 will not work no matter what I try. A
cow-orker said he downl
Title: RE: [Cooker] XFree-3.3.5
Can we update the Xfree86.3.3.1...MDK.rpm with the "non.MDK" 3.3.5 rpm?
(Forgive me if this is a no-brainer, I just can't run X until I can update it, I have a G400 MAX)
On Thu, 2 Sep 1999, [ISO-8859-1] Grégoire Colbert wrote:
> By the way, since KDE 1.(.1).2 comes out the 6th September
> (theorically), Cassini should have both XFree-3.3.5 and KDE
> 1.1.2final. I mean that if "big stuff" comes out just at the time
> where the new Mandrake is planned to be release
I agree. It would be a big win for you to have X 3.3.5 and KDE 1.2. You
would be ahead of other distributions.
Sam Gentile
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 02, 1999 6:36 AM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] XFree
Hello Grégoire,
Thursday, Thursday, September 02, 1999, you wrote:
GC> Suite au message de Brad Boutwell <[EMAIL PROTECTED]> intitulé
GC> [RE: [Cooker] XFree-3.3.5], du Thu, 2 Sep 1999 04:36:07 -0500:
GC> | Do you guys have any idea how long it will be before we see the
GC&g
Gregus wrote :
<http://www.linux-mandrake.com
-Original Message-
From: Grégoire Colbert <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: 2 septembre, 1999 07:39
Subject: Re: [Cooker] XFree-3.3.5
Suite au message de Brad Boutwell <[EMAIL PROTEC
Title: RE: [Cooker] XFree-3.3.5
I agree with Gregus wholeheartedly...As one with a newer video card (Matrox G400 MAX) both of these new versions are essential to me...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 02, 1999 5:36 AM
To
Suite au message de Brad Boutwell <[EMAIL PROTECTED]> intitulé
[RE: [Cooker] XFree-3.3.5], du Thu, 2 Sep 1999 04:36:07 -0500:
| Do you guys have any idea how long it will be before we see the
| 3.3.5.MDK.rpm?
Well... Not to give advice, but I think that this should be put in
Cassini... Wh
Title: RE: [Cooker] XFree-3.3.5
Do you guys have any idea how long it will be before we see the 3.3.5.MDK.rpm?
On Wed, 01 Sep 1999, Grégoire Colbert wrote:
> Hi!
>
> XFree86-3.3.5 is released.
Hey, cool ;-)
Please remember to include the FBDev-docs in the RPMs. To cite
one of my earlier mails about that subject:
--- snip
My earlier point about the missing
Title: RE: [Cooker] XFree-3.3.5 released
Where might I find a package of 3.3.5 that will update MDK 6.0?
(Not meaning to be OT, I have yet to install cooker...)
-Original Message-
From: Grégoire Colbert [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 01, 1999 1:33 PM
To
Hi!
XFree86-3.3.5 is released.
Gregus
201 - 262 of 262 matches
Mail list logo
