Tobias Ellinghaus schrieb am 02.04.2018 um 23:22:
Am Montag, 2. April 2018, 22:35:05 CEST schrieb Bernhard:
Tobias Ellinghaus schrieb am 02.04.2018 um 22:29:
Just using ctrl-q to close darktable, i.e., the same way you normally do
it, should have worked. And on the next start it will be back
On 02/04/18 23:25, Tobias Ellinghaus wrote:
Am Montag, 2. April 2018, 22:39:33 CEST schrieb Michael Rasmussen:
On Mon, 02 Apr 2018 22:29:23 +0200
Tobias Ellinghaus wrote:
should have worked. And on the next start it will be back to normal. The
whole joke is only done once a year (unless you m
Laughing until 2021 ;-))
(Keep on with The Good Knight!)
2018-04-03 6:10 GMT-03:00 Romano Giannetti :
> On 02/04/18 23:25, Tobias Ellinghaus wrote:
>
>> Am Montag, 2. April 2018, 22:39:33 CEST schrieb Michael Rasmussen:
>>
>>> On Mon, 02 Apr 2018 22:29:23 +0200
>>>
>>> Tobias Ellinghaus wrote:
On Mon, 02 Apr 2018 22:55:11 +0200, Michael Below wrote:
> Hi,
>
> Am Montag, den 02.04.2018, 19:23 +0200 schrieb Pascal Obry:
>>
>> There is confusion. CUPS is a print queue it cannot be compared to
>> TurboPrint. The gutenprint and TurboPrint drivers can be compared and
>> both are using CUPS as
Hi,
just my 2 ct: in my case it is a matter of responsiveness - the Canon printer i
mentioned is two years old and, as far as I can see, in Gutenprint it has
experimental support only. My favourite, the Epson xp 15000, is a few months
old, and it seems like the whole XP printer family has very
If I had to guess I would say that you are using darktable from a third party
repository that is not meant to be used with your OS version. As Robert
suggested, it might be that you are using Ubuntu, have used Pascal's PPA to
install dt and then had an OS update. That tends to disable the PP
On 18-04-01 22:26:50, Michael Below wrote:
I am looking at inkjet printers to print photos from darktable on
Debian Linux. Any recommendations?
I'll be 'that' guy and say that my print shop costs less per page than
any printer I've owned (inkjet), and the quality is great.
It took a couple o
I use Turboprint for output to an R2000 Epson printer.
If I export a file to Gimp and then Turboprint, the results almost
exactly match my calibrated screen.
If I directly use the dt print system with Turboprint and the same
settings the colors are very poor (unacceptably darker).
Any idea what I m
Le mardi 03 avril 2018 à 09:47 -0700, David Vincent-Jones a écrit :
> I use Turboprint for output to an R2000 Epson printer.
> If I export a file to Gimp and then Turboprint, the results almost
> exactly match my calibrated screen.
> If I directly use the dt print system with Turboprint and the sam
On 2018-04-03 07:03 AM, Michael wrote:
If I had to guess I would say that you are using darktable from a third party
repository that is not meant to be used with your OS version. As Robert
suggested, it might be that you are using Ubuntu, have used Pascal's PPA to
install dt and then had an
> Message du 03/04/18 19:20
> De : "Pascal Obry"
> A : "David Vincent-Jones" , "darktable-user"
> Copie à :
> Objet : Re: [darktable-user] Printer Colors
>
> Le mardi 03 avril 2018 à 09:47 -0700, David Vincent-Jones a écrit :
> > I use Turboprint for output to an R2000 Epson printer.
> > If I
On 04/03/2018 10:20 AM, Pascal Obry wrote:
> Le mardi 03 avril 2018 à 09:47 -0700, David Vincent-Jones a écrit :
>> I use Turboprint for output to an R2000 Epson printer.
>> If I export a file to Gimp and then Turboprint, the results almost
>> exactly match my calibrated screen.
>> If I directly
On Tue, 2018-04-03 at 09:47 -0700, David Vincent-Jones wrote:
> I use Turboprint for output to an R2000 Epson printer.
> If I export a file to Gimp and then Turboprint, the results almost
> exactly match my calibrated screen.
> If I directly use the dt print system with Turboprint and the same
> se
>Using 'Edit-withGimp' export there is an 8 bit (jpeg ?) intermediary ( I
>assume) that may make a difference.
If you use "Edit with Gimp", it uses the formatting parameters you choose
just after (like while exporting to a file).
So if you choose a 16-bit Tiff, there will be a temporary file creat
On 04/03/2018 12:01 PM, Timur Irikovich Davletshin wrote:
> On Tue, 2018-04-03 at 09:47 -0700, David Vincent-Jones wrote:
>> I use Turboprint for output to an R2000 Epson printer.
>> If I export a file to Gimp and then Turboprint, the results almost
>> exactly match my calibrated screen.
>> If I
On 04/03/2018 12:12 PM, Jean-Luc Coulon (f5ibh) wrote:
>> Using 'Edit-withGimp' export there is an 8 bit (jpeg ?) intermediary ( I
>> assume) that may make a difference.
>
> If you use "Edit with Gimp", it uses the formatting parameters you choose
> just after (like while exporting to a file).
>
On Tue, 2018-04-03 at 12:14 -0700, David Vincent-Jones wrote:
>
> On 04/03/2018 12:01 PM, Timur Irikovich Davletshin wrote:
> > On Tue, 2018-04-03 at 09:47 -0700, David Vincent-Jones wrote:
> > > I use Turboprint for output to an R2000 Epson printer.
> > > If I export a file to Gimp and then Turbo
Le mardi 03 avril 2018 à 22:01 +0300, Timur Irikovich Davletshin a
écrit :
> You have to set required paper type, color profile, etc. directly in
> Turboprint and save them as default (or in your browser
> https://localhost:631) if you want to get proper results.
No that's not the way it must be
Le mardi 03 avril 2018 à 12:14 -0700, David Vincent-Jones a écrit :
> I am doing just that as I initially stated I first set TP with
> paper and color then both dt and Gimp correctly see the TP
> settings. Only the paper borders need to be individually set in both
> output programs.
With
On 04/03/2018 12:38 PM, Pascal Obry wrote:
> Le mardi 03 avril 2018 à 12:14 -0700, David Vincent-Jones a écrit :
>> I am doing just that as I initially stated I first set TP with
>> paper and color then both dt and Gimp correctly see the TP
>> settings. Only the paper borders need to be
On 04/03/2018 12:38 PM, Pascal Obry wrote:
> Le mardi 03 avril 2018 à 12:14 -0700, David Vincent-Jones a écrit :
>> I am doing just that as I initially stated I first set TP with
>> paper and color then both dt and Gimp correctly see the TP
>> settings. Only the paper borders need to be
I entered a custom paper size into Turboprint (10"w x 11"h) and named it
"Custom 10 x 11 inch". This size shows correctly now in TP and Gimp but
does not display among the dt sizes. dt has a much reduced list of sizes
but does have a 10 x 11 size, so this is what I tried to use.
I adjusted the ima
Le mardi 03 avril 2018 à 14:23 -0700, David Vincent-Jones a écrit :
> OK ... Currently I have AppleRGB in the printer settings ... what
> should I enter?
Oh, in the printer settings, well AppleRGB or AdobeRGB should be ok.
But what do you have in profile for the printer itself?
--
Pascal Obr
23 matches
Mail list logo
